Hi all. I'm trying desperately to get OpenWRT 15.05.1 running on my Dockstar's NAND for a university project.
No matter what I do, OpenWRT breaks the partitioning on boot and consequently cannot find my rootfs.
I'm following the guide (loosely): http://blog.qnology.com/2015/04/openwrt-on-pogoplug-v3oxnas-proclassic.html
My partitioning is as follows:
I've even modified the dtb as it contains the partition definitions with no luck. Surely I shouldn't have to recompile the kernel for this to work?
And this is the output. I can't get it to just leave the paritioning as is:
No matter what I do, OpenWRT breaks the partitioning on boot and consequently cannot find my rootfs.
I'm following the guide (loosely): http://blog.qnology.com/2015/04/openwrt-on-pogoplug-v3oxnas-proclassic.html
My partitioning is as follows:
mtdparts=mtdparts=orion_nand:1M(u-boot),-(rootfs)And my bootargs includes $mtdparts
bootargs console=ttyS0,115200n8 ubi.mtd=1 root=ubi0:rootfs rw rootfstype=ubifs rootdelay=10 $mtdparts
I've even modified the dtb as it contains the partition definitions with no luck. Surely I shouldn't have to recompile the kernel for this to work?
And this is the output. I can't get it to just leave the paritioning as is:
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 11:40:01 CET 2016 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: Seagate FreeAgent Dockstar [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 124920K/131072K available (3466K kernel code, 151K rwdata, 964K rodata, 136K init, 191K bss, 6152K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc045bd4c (4432 kB) [ 0.000000] .init : 0xc045c000 - 0xc047e000 ( 136 kB) [ 0.000000] .data : 0xc047e000 - 0xc04a3e04 ( 152 kB) [ 0.000000] .bss : 0xc04a3e04 - 0xc04d3b44 ( 192 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000015] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns [ 0.000154] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 0.090096] pid_max: default: 32768 minimum: 301 [ 0.090239] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090259] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090737] CPU: Testing write buffer coherency: ok [ 0.091071] Setting up static identity map for 0x108d8 - 0x10914 [ 0.091356] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.093103] pinctrl core: initialized pinctrl subsystem [ 0.093505] regulator-dummy: no parameters [ 0.096970] NET: Registered protocol family 16 [ 0.097363] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.098217] cpuidle: using governor ladder [ 0.098557] Feroceon L2: Enabling L2 [ 0.098600] Feroceon L2: Cache support initialised. [ 0.098885] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet 0-port@0: local-mac-address is not set [ 0.106354] platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral [ 0.106735] SCSI subsystem initialized [ 0.107078] usbcore: registered new interface driver usbfs [ 0.107157] usbcore: registered new interface driver hub [ 0.107228] usbcore: registered new device driver usb [ 0.108159] Switched to clocksource orion_clocksource [ 0.109206] NET: Registered protocol family 2 [ 0.109907] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109934] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.109953] TCP: Hash tables configured (established 1024 bind 1024) [ 0.110009] TCP: reno registered [ 0.110021] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.110042] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.110262] NET: Registered protocol family 1 [ 0.111091] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.112134] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.112154] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.112403] msgmni has been set to 243 [ 0.113238] io scheduler noop registered [ 0.113257] io scheduler deadline registered (default) [ 0.114383] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 0.114931] irq: Cannot allocate irq_descs @ IRQ32, assuming pre-allocated [ 0.115251] irq: Cannot allocate irq_descs @ IRQ64, assuming pre-allocated [ 0.147705] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.150753] console [ttyS0] disabled [ 0.150822] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 0.542379] console [ttyS0] enabled [ 0.547164] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 0.553570] nand: Micron MT29F2G08AAD [ 0.557244] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 0.562956] Scanning device for bad blocks [ 0.722676] 4 ofpart partitions found on MTD device orion_nand [ 0.728543] Creating 4 MTD partitions on "orion_nand": [ 0.733706] 0x000000000000-0x0000000e0000 : "u-boot" [ 0.739455] 0x0000000e0000-0x0000001e0000 : "u-boot environment" [ 0.746168] 0x000000100000-0x000000300000 : "second stage u-boot" [ 0.752992] 0x000000200000-0x000010000000 : "root" [ 0.759415] libphy: orion_mdio_bus: probed [ 0.813112] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 0.821304] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:1a:22:b6 [ 0.830122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.836680] ehci-pci: EHCI PCI platform driver [ 0.841227] ehci-platform: EHCI generic platform driver [ 0.846603] ehci-orion: EHCI orion driver [ 0.850798] orion-ehci f1050000.ehci: EHCI Host Controller [ 0.856330] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 0.864166] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 0.888179] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 0.894831] hub 1-0:1.0: USB hub found [ 0.898653] hub 1-0:1.0: 1 port detected [ 0.903162] usbcore: registered new interface driver usb-storage [ 0.910325] TCP: cubic registered [ 0.913663] NET: Registered protocol family 17 [ 0.918220] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.930922] Bridge firewalling registered [ 0.935069] 8021q: 802.1Q VLAN Support v1.8 [ 0.940725] USB Power: 5000 mV [ 0.944310] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.952055] Waiting 10 sec before mounting root device... [ 1.218178] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 1.370449] hub 1-1:1.0: USB hub found [ 1.374555] hub 1-1:1.0: 4 ports detected [ 10.958255] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19 [ 10.965936] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6 [ 10.973298] Please append a correct "root=" boot option; here are the available partitions: [ 10.981700] 1f00 896 mtdblock0 (driver?) [ 10.986785] 1f01 1024 mtdblock1 (driver?) [ 10.991879] 1f02 2048 mtdblock2 (driver?) [ 10.996961] 1f03 260096 mtdblock3 (driver?) [ 11.002054] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 11.010353] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
