Hi,
i found this tutorial:
http://morschi.com/2012/10/05/seagate-goflex-net-debian/
However, I have not installed the latest uboot and therefore cannot install the rescue system into NAND. After 6 hours of searching through google and this website, I cannot find anything which helps.
With the Rescue system on an USB Stick I am able to ssh box. But without the rescue system/USB Stick the box does not boot properly. What can I do?
Best regards
i found this tutorial:
http://morschi.com/2012/10/05/seagate-goflex-net-debian/
However, I have not installed the latest uboot and therefore cannot install the rescue system into NAND. After 6 hours of searching through google and this website, I cannot find anything which helps.
# checking for /usr/sbin/nandwrite... # checking for /usr/sbin/nanddump... # checking for /usr/sbin/ubiformat... # checking for /usr/sbin/flash_eraseall... # checking for /usr/sbin/fw_printenv... # checking for /etc/fw_env.config... ## Verifying new uBoot... Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... Connecting to download.doozan.com (50.116.34.13:80) Connecting to projects.doozan.com (50.116.34.13:80) valid-uboot.md5 100% |*******************************| 1133 0:00:00 ETA ## ## uBoot is not up-to-date ## Please install the newest uBoot and then re-run this installer. ##
With the Rescue system on an USB Stick I am able to ssh box. But without the rescue system/USB Stick the box does not boot properly. What can I do?
Best regards