I just acquired a Pogoplug E01 the original Cloud Engines plug. The internal board is manufactured by GlobalScale Technologies and indicates a REV3.0 It is a 1.2Ghz 88F6281 with 512MB Hynix NAND and 256MB Elpida RAM. There is only a single USB 2.0 and Gigabit Ethernet via the 88E1116R. There is also an on-board battery. Stock U-Boot is 1.1.4 CloudEngines (3.4.16). Stock linux kernel is 2.6.22.18. I'm wondering if it is safe to use the E02 U-Boot image or would the SheevaPlug image be more appropriate?
↧