Dockstar kernel booting problem (10 replies)

Hi Bodhi,

after updating to new Uboot 2015.10 (which worked very well btw.), I updated my USB-Stick to Devuan Jessie with Kernel 4.6, which seems to run pretty smooth.

The only problem is: the rescue system doesn't boot through, so I could not login to it.
In netconsole I can see the kernel beeing loaded:

NAND read: device 0 offset 0x100000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-2.6.32.18-dockstar
   Created:      2010-09-16  20:04:19 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3175992 Bytes = 3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK


Starting kernel ...

But after that the LED stays yellow, and no network connect is possible, no DHCP requests are beeing sent.

I think, it must have something to do with non FDT Kernel beeing installed, but I don't have a clue, how to include kirkwood-dockstar.dtb .

Do You have an idea, what should be done? Unfortunately the serial console seems to be grilled, almost only garbage is printed.

TIA,
Peter