Hi guys,
I need your help on recovering my Pogoplug v4 device.
History of issue: Last year I followed the instructions on link(http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html) and converted the device for Samba. I had used mmc card for running Debian 3.14, It worked flawlessly until last month when mmc couldn't boot and it booted with default pogoplug OS.
I took a new mmc card and redid the complete install. The only change was to make mmc as the first boot option (by changing the statement to /tmp/fw_setenv bootcmd 'run bootcmd_mmc; run bootcmd_usb; run bootcmd_sata; run bootcmd_pogo; reset')
Now the status is that with mmc inserted, the device boots up with blinking green light for a while then a yellow light for 2-3 secs and then the green light stablizes. However, it wasn't connected to the router(Debian was set for DHCP and i didn't find it in the list of devices connected to router, checked through router as well as fing). WITHOUT mmc or any other USB hdd, the lights order is green blinks for 14-15 seconds then around 10-12 red blinks and it restarts the sequence.
Could you guide on how to debug and resolve it?
I need your help on recovering my Pogoplug v4 device.
History of issue: Last year I followed the instructions on link(http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html) and converted the device for Samba. I had used mmc card for running Debian 3.14, It worked flawlessly until last month when mmc couldn't boot and it booted with default pogoplug OS.
I took a new mmc card and redid the complete install. The only change was to make mmc as the first boot option (by changing the statement to /tmp/fw_setenv bootcmd 'run bootcmd_mmc; run bootcmd_usb; run bootcmd_sata; run bootcmd_pogo; reset')
Now the status is that with mmc inserted, the device boots up with blinking green light for a while then a yellow light for 2-3 secs and then the green light stablizes. However, it wasn't connected to the router(Debian was set for DHCP and i didn't find it in the list of devices connected to router, checked through router as well as fing). WITHOUT mmc or any other USB hdd, the lights order is green blinks for 14-15 seconds then around 10-12 red blinks and it restarts the sequence.
Could you guide on how to debug and resolve it?