Problem booting Pogo Pro 4.4.38-oxnas-tld-5 with Intel SSDSC2BF180A4L (1 reply)

Hi bodhi,
it is really great that you don'T let our small plug computer to become obsolete! Huge thanks for that!

I just recently installed 4.4.38 on all my pogoplugs and now they work fine. So far i used 160 GB 2.5' SATA drives as i boot completely from SATA. Some of those drives i replaced with 160 GB SSD and everything went fine. Now i received a 180 GB SSD and the trouble started:
1. If i install the 3.17 root image it boots fine and works fine on the 180GB SSD
2. if I upgrade the kernel to 4.0 it still works fine it still works fine
3. If i upgrade to 4.1 or 4.4.38 then it hangs on boot.

SSD: Intel SSD Pro 1500 Series (180GB)

the error is around the sata as i see some timeouts in the log:

[    3.070003] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    3.087119] ata1.00: ATA-9: INTEL SSDSC2BF180A4L, LADi, max UDMA/133
[    3.093496] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   18.100001] ata1.00: qc timeout (cmd 0xef)
[   18.104084] sata_oxnas: resetting SATA core
[   18.460001] ata1.00: failed to set xfermode (err_mask=0x5)
[   18.969999] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   33.990005] ata1.00: qc timeout (cmd 0xef)
......

Attached the whole boot log to the message. I will try to see if i can upgrade the SSD firmware and if it helps, but otherwise i have no ide what is going wrong.