Hi Bodhi,
I seem to be running into an issue with your latest .config on 4.10.8, the disk doesn't appear to be detected.
Yet using the mvebu_v5_defconfig + your patch, it boots without issue..
Not sure what the problem is, it's really strange..
The only thing I changed in your config was to disable lirc_rpi (as it won't build) and in the mvebu config, I just enabled cgroups..
Any ideas?
I seem to be running into an issue with your latest .config on 4.10.8, the disk doesn't appear to be detected.
Marvell>> Marvell>> usb start (Re)start USB... USB: scanning bus for devices... 3 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found Marvell>> fatload usb 0 0x800000 boot.uImage-nsa310s_ reading boot.uImage-nsa310s_ ........................................................................................................................................................................................................................................................................................................................... 3232240 bytes read Marvell>> setenv bootargs 'console=ttyS0,115200 root=/dev/sda2 coherent_pool=2M' Marvell>> bootm 0x800000 ## Booting image at 00800000 ... Image Name: Linux Kernel for NSA310S Created: 2017-04-01 20:30:18 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3232176 Bytes = 3.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.8-c1-nsa310 (root@mark-desktop2) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 PREEMPT Sat Apr 1 20:29:14 BST 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt:Machine model: Zyxel NSA310S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 coherent_pool=2M [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 250492K/262144K available (6178K kernel code, 615K rwdata, 1680K rodata, 300K init, 306K bss, 11652K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0610dc8 (6180 kB) [ 0.000000] .init : 0xc07e3000 - 0xc082e000 ( 300 kB) [ 0.000000] .data : 0xc082e000 - 0xc08c7ddc ( 616 kB) [ 0.000000] .bss : 0xc08c7ddc - 0xc0914910 ( 307 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000009] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000570] Console: colour dummy device 80x30 [ 0.000603] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.090098] pid_max: default: 32768 minimum: 301 [ 0.090330] Security Framework initialized [ 0.090350] AppArmor: AppArmor disabled by boot time parameter [ 0.090481] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090499] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.091548] CPU: Testing write buffer coherency: ok [ 0.092454] Setting up static identity map for 0x8200 - 0x8258 [ 0.092748] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.096327] devtmpfs: initialized [ 0.102493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.102521] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.102800] prandom: seed boundary self test passed [ 0.107530] prandom: 100 self tests passed [ 0.107542] pinctrl core: initialized pinctrl subsystem [ 0.108843] NET: Registered protocol family 16 [ 0.110868] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.140104] cpuidle: using governor ladder [ 0.170102] cpuidle: using governor menu [ 0.170558] Feroceon L2: Enabling L2 [ 0.170601] Feroceon L2: Cache support initialised. [ 0.171000] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.177306] No ATAGs? [ 0.211708] vgaarb: loaded [ 0.212043] usbcore: registered new interface driver usbfs [ 0.212127] usbcore: registered new interface driver hub [ 0.212193] usbcore: registered new device driver usb [ 0.213283] clocksource: Switched to clocksource orion_clocksource [ 0.266223] VFS: Disk quotas dquot_6.6.0 [ 0.266312] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.277990] NET: Registered protocol family 2 [ 0.278903] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.278948] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.278982] TCP: Hash tables configured (established 2048 bind 2048) [ 0.279048] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.279073] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.279263] NET: Registered protocol family 1 [ 0.279770] RPC: Registered named UNIX socket transport module. [ 0.279783] RPC: Registered udp transport module. [ 0.279791] RPC: Registered tcp transport module. [ 0.279799] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.280189] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.281097] audit: initializing netlink subsys (disabled) [ 0.281576] Initialise system trusted keyrings [ 0.281793] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.281869] zbud: loaded [ 0.283028] NFS: Registering the id_resolver key type [ 0.283066] Key type id_resolver registered [ 0.283076] Key type id_legacy registered [ 0.283095] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.283105] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.283459] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.283880] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.284149] orangefs_init: module version upstream loaded [ 2.553291] random: fast init done [ 5.221561] Key type asymmetric registered [ 5.221576] Asymmetric key parser 'x509' registered [ 5.221658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.221671] io scheduler noop registered [ 5.221680] io scheduler deadline registered [ 5.221715] io scheduler cfq registered (default) [ 5.223089] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 5.225284] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 5.225306] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 5.225322] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 5.225337] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.225716] PCI: bus0: Fast back to back transfers disabled [ 5.225744] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.225942] PCI: bus1: Fast back to back transfers enabled [ 5.226024] pci 0000:00:01.0: PCI bridge to [bus 01] [ 5.226617] mv_xor f1060800.xor: Marvell shared XOR driver [ 5.284179] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 5.284422] mv_xor f1060900.xor: Marvell shared XOR driver [ 5.344155] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 5.344657] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.346076] console [ttyS0] disabled [ 5.346143] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 10416666) is a 16550A [ 5.954752] console [ttyS0] enabled [ 5.959471] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 5.965835] nand: Samsung NAND 128MiB 3,3V 8-bit [ 5.970431] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 5.977992] Scanning device for bad blocks [ 6.018060] Bad eraseblock 354 at 0x000002c40000 [ 6.090593] 9 ofpart partitions found on MTD device orion_nand [ 6.096421] Creating 9 MTD partitions on "orion_nand": [ 6.101538] 0x000000000000-0x000000100000 : "uboot" [ 6.107895] 0x000000100000-0x000000180000 : "uboot_env" [ 6.114560] 0x000000180000-0x000000200000 : "key_store" [ 6.121141] 0x000000200000-0x000000280000 : "info" [ 6.127226] 0x000000280000-0x000000c80000 : "etc" [ 6.133277] 0x000000c80000-0x000001680000 : "kernel_1" [ 6.139829] 0x000001680000-0x000004640000 : "rootfs1" [ 6.146625] 0x000004640000-0x000005040000 : "kernel_2" [ 6.153178] 0x000005040000-0x000008000000 : "rootfs2" [ 6.161172] libphy: Fixed MDIO Bus: probed [ 6.166213] libphy: orion_mdio_bus: probed [ 6.170306] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@1: Whitelisted compatible string. Please remove [ 6.181765] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 6.283506] mv643xx_eth: Set the PHY to fix link down [ 6.284354] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 28:28:5d:1f:2c:d4 [ 6.298189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.304730] ehci-pci: EHCI PCI platform driver [ 6.309214] ehci-orion: EHCI orion driver [ 6.313436] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.318923] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.326775] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 6.353324] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.359568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.366355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.373568] usb usb1: Product: EHCI Host Controller [ 6.378430] usb usb1: Manufacturer: Linux 4.10.8-c1-nsa310 ehci_hcd [ 6.384687] usb usb1: SerialNumber: f1050000.ehci [ 6.390097] hub 1-0:1.0: USB hub found [ 6.393924] hub 1-0:1.0: 1 port detected [ 6.398776] mousedev: PS/2 mouse device common for all mice [ 6.404707] i2c /dev entries driver [ 6.410745] ht1382 0-0068: rtc core: registered ht1382 as rtc0 [ 6.418958] hidraw: raw HID events driver (C) Jiri Kosina [ 6.424739] drop_monitor: Initializing network drop monitor service [ 6.431249] NET: Registered protocol family 17 [ 6.435910] Key type dns_resolver registered [ 6.440963] registered taskstats version 1 [ 6.445078] Loading compiled-in X.509 certificates [ 6.449905] zswap: loaded using pool lzo/zbud [ 6.456849] Key type big_key registered [ 6.462910] Key type encrypted registered [ 6.469497] ht1382 0-0068: setting system clock to 2017-04-01 13:44:47 UTC (1491054287) [ 6.478124] VFS: Cannot open root device "sda2" or unknown-block(0,0): error -6 [ 6.485555] Please append a correct "root=" boot option; here are the available partitions: [ 6.493921] 1f00 1024 mtdblock0 [ 6.493926] (driver?) [ 6.500437] 1f01 512 mtdblock1 [ 6.500440] (driver?) [ 6.507109] 1f02 512 mtdblock2 [ 6.507114] (driver?) [ 6.513647] 1f03 512 mtdblock3 [ 6.513651] (driver?) [ 6.520161] 1f04 10240 mtdblock4 [ 6.520164] (driver?) [ 6.526685] 1f05 10240 mtdblock5 [ 6.526689] (driver?) [ 6.533199] 1f06 48896 mtdblock6 [ 6.533202] (driver?) [ 6.539722] 1f07 10240 mtdblock7 [ 6.539726] (driver?) [ 6.546255] 1f08 48896 mtdblock8 [ 6.546259] (driver?) [ 6.552768] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 6.560995] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.8-c1-nsa310 #1 [ 6.567573] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 6.573840] [<c0016914>] (unwind_backtrace) from [<c0012a08>] (show_stack+0x10/0x14) [ 6.581557] [<c0012a08>] (show_stack) from [<c00d4d30>] (panic+0xb0/0x250) [ 6.588414] [<c00d4d30>] (panic) from [<c07e42f4>] (mount_block_root+0x210/0x288) [ 6.595873] [<c07e42f4>] (mount_block_root) from [<c07e4460>] (mount_root+0xf4/0x120) [ 6.603673] [<c07e4460>] (mount_root) from [<c07e45b4>] (prepare_namespace+0x128/0x188) [ 6.611648] [<c07e45b4>] (prepare_namespace) from [<c07e3e7c>] (kernel_init_freeable+0x1fc/0x250) [ 6.620486] [<c07e3e7c>] (kernel_init_freeable) from [<c060b9d8>] (kernel_init+0x8/0xf0) [ 6.628547] [<c060b9d8>] (kernel_init) from [<c000efd0>] (ret_from_fork+0x14/0x24) [ 6.636091] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 6.783308] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.994908] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 7.001596] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.023302] usb 1-1: Product: USB2.0 Hub [ 7.034012] hub 1-1:1.0: USB hub found [ 7.043311] hub 1-1:1.0: 4 ports detected [ 7.373312] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 7.544282] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5567 [ 7.551143] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.573302] usb 1-1.1: Product: Cruzer Blade [ 7.577567] usb 1-1.1: Manufacturer: SanDisk [ 7.581818] usb 1-1.1: SerialNumber: 4C530499901204110043
Yet using the mvebu_v5_defconfig + your patch, it boots without issue..
Marvell>> setenv bootargs 'console=ttyS0,115200 root=/dev/sda2 coherent_pool=2M'
Marvell>> printenv
bootdelay=2
baudrate=115200
loads_echo=0
ipaddr=10.4.52.165
serverip=10.4.52.7
rootpath=/srv/ubuntu
netmask=255.255.255.0
nandEcc=1bit
MODEL_ID=AD03
PRODUCT_NAME=STG-315
FEATURE_BIT=00
CONTRY_TYPE=FF
VENDOR_NAME=MitraStar Technology Corp.
run_diag=yes
ethaddr=28:28:5D:1F:2C:D4
ethprime=egiga0
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
image_multi=yes
ethact=egiga0
arcNumber=4931
bootcmd=ide reset; ext2load ide 0:1 0x800000 /boot.uImage; bootm 0x800000
console=console=console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot),0x7f00000@0x100000(root)
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
disaMvPnp=no
enaAutoRecovery=yes
kernel_addr=0x4640000
pcieTune=no
bootargs=console=ttyS0,115200 root=/dev/sda3 coherent_pool=2M
nvironment size: 1446/131068 bytes
Marvell>> usb start
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
Marvell>> fatload usb 0 0x800000 boot.uImage-nsa310s
reading boot.uImage-nsa310s
..................................................................................................................................................................................................................................................................................
2817976 bytes read
Marvell>> bootm 0x800000
## Booting image at 00800000 ...
Image Name: Linux Kernel for NSA310Sx
Created: 2017-04-01 21:32:37 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2817912 Bytes = 2.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.10.8-mnsa310 (root@mark-desktop2) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #2 PREEMPT Sat Apr 1 22:21:44 BST 2017
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
CPU: VIVT data cache, VIVT instruction cache
OF: fdt:Machine model: Zyxel NSA310S
Memory policy: Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyS0,115200 root=/dev/sda3 coherent_pool=2M
ID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 251604K/262144K available (5473K kernel code, 274K rwdata, 1356K rodata, 208K init, 666K bss, 10540K reserved, 0K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0560778 (5474 kB)
.init : 0xc06de000 - 0xc0712000 ( 208 kB)
.data : 0xc0712000 - 0xc0756a40 ( 275 kB)
.bss : 0xc0756a40 - 0xc07fd328 ( 667 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:16 nr_irqs:16 16
clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
Console: colour dummy device 80x30
Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x81e0 - 0x8238
mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
cpuidle: using governor menu
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
[Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource orion_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers enabled
pci 0000:00:01.0: PCI bridge to [bus 01]
mv_xor f1060800.xor: Marvell shared XOR driver
mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
mv_xor f1060900.xor: Marvell shared XOR driver
mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
console [ttyS0] disabled
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 10416666) is a 16550A
console [ttyS0] enabled
loop: module loaded
sata_mv f1080000.sata: slots 32 ports 2
scsi host0: sata_mv
scsi host1: sata_mv
ata1: SATA max UDMA/133 irq 32
ata2: SATA max UDMA/133 irq 32
nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
nand: Samsung NAND 128MiB 3,3V 8-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Scanning device for bad blocks
Bad eraseblock 354 at 0x000002c40000
9 ofpart partitions found on MTD device orion_nand
Creating 9 MTD partitions on "orion_nand":
0x000000000000-0x000000100000 : "uboot"
0x000000100000-0x000000180000 : "uboot_env"
0x000000180000-0x000000200000 : "key_store"
0x000000200000-0x000000280000 : "info"
0x000000280000-0x000000c80000 : "etc"
0x000000c80000-0x000001680000 : "kernel_1"
0x000001680000-0x000004640000 : "rootfs1"
0x000004640000-0x000005040000 : "kernel_2"
0x000005040000-0x000008000000 : "rootfs2"
libphy: Fixed MDIO Bus: probed
libphy: orion_mdio_bus: probed
[Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@1: Whitelisted compatible string. Please remove
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth: Set the PHY to fix link down
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 28:28:5d:1f:2c:d4
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-orion: EHCI orion driver
orion-ehci f1050000.ehci: EHCI Host Controller
orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
orion_wdt: Initial timeout 25 sec
marvell-cesa f1030000.crypto: CESA device successfully registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: no performance counters
oprofile: using timer interrupt.
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
input: gpio_keys as /devices/platform/gpio_keys/input/input0
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: new high-speed USB device number 2 using orion-ehci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl F300)
random: fast init done
EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
devtmpfs: mounted
usb 1-1.1: new high-speed USB device number 3 using orion-ehci
Freeing unused kernel memory: 208K
This architecture does not have kernel memory protection.
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1.1:1.0
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'arm'.
Welcome to Debian GNU/Linux 8 (jessie)!
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to <nsa310s>.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
sd 2:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target Paths.
Expecting device dev-disk-by\x2duuid-a822733c\x2dfd7...e1ba9.device...
Expecting device dev-disk-by\x2duuid-ca5fe0f9\x2d22e...d54f2.device...
[ OK ] Created slice Root Slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket.
[ OK ] Created slice System Slice.
Starting File System Check on Root Device...
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
Starting Increase datagram queue length...
Mounting Debug File System...
Starting udev Coldplug all Devices...
Starting Create Static Device Nodes in /dev...
Starting Load Kernel Modules...
[ OK ] Reached target Slices.
[ OK ] Started Increase datagram queue length.
[ OK ] Started Load Kernel Modules.
[ OK ] Mounted Debug File System.
Starting Apply Kernel Variables...
[ OK ] Listening on Syslog Socket.
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started udev Kernel Device Mansystemd-udevd[1338]: starting version 215
ager.
Starting Copy rules generated while the root was ro...
[ OK ] Started Copy rules generated while the root was ro.
systemd-fsck[841]: /dev/sda3: clean, 29628/30408704 files, 2119124/121608192 blocks
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device WDC_WD5000AAKX-001CA0 1.
[ OK ] Found device WDC_WD5000AAKX-001CA0 2.
[ OK ] Created slice system-ifup.slice.
Activating swap /dev/disk/by-uuid/a822733c-fd78-4573...42ba51fe1ba9...
Starting File System Check on /dev/disk/by-uuid/ca5f...e257e81d54f2...
Adding 975868k swap on /dev/sda2. Priority:-1 extents:1 across:975868k
[ OK ] Activated swap /dev/disk/by-uuid/a822733c-fd78-4573-a6e3-42ba51fe1ba9.
[ OK ] Reached target Swap.
[ OK ] Started File System Check on /dev/disk/by-uuid/ca5fe...8-e257e81d54f2.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
Starting Various fixups to make systemd work better on Debian...
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Started Various fixups to make systemd work better on Debian.
[ OK ] Started Load/Save Random Seed.
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Create Volatile Files and Directories...
Starting LSB: Raise network interfaces....
systemd-journald[1129]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
mv643xx_eth: Set the PHY back to auto-negotiation mode
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: crng init done
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ OK ] Started LSB: NFS support files common to client and server.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting OpenBSD Secure Shell server...
[ OK ] Started OpenBSD Secure Shell server.
Starting Deferred execution scheduler...
[ OK ] Started Deferred execution scheduler.
Starting Regular background program processing daemon...
[ OK ] Started Regular background program processing daemon.
Starting /etc/rc.local Compatibility...
Starting Login Service...
Starting LSB: exim Mail Transport Agent...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting System Logging Service...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started Login Service.
[ OK ] Started Permit User Sessions.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started System Logging Service.
[ OK ] Started LSB: exim Mail Transport Agent.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux 8 nsa310s ttyS0
nsa310s login: mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Not sure what the problem is, it's really strange..
The only thing I changed in your config was to disable lirc_rpi (as it won't build) and in the mvebu config, I just enabled cgroups..
Any ideas?