My Cloud Mirror Gen2 (13 replies)

As a follow up from this post could a My Cloud Mirror Gen2 user please try to kwboot the attached u-boot?

You will need to decompress it first using gzip:

$ gunzip u-boot-a38x-GrandTeton_2014T3_PQ-nand-uart.bin.gz

You will also need to use a patched kwboot binary (amd64 / arm):

./kwboot -f -t -B 115200 /dev/ttyUSB0 -b u-boot-a38x-GrandTeton_2014T3_PQ-nand-uart.bin -s 0 -q 1

The timing is not perfect you may have to try multiple times. Follow these instructions if you cannot get your MCM Gen 2 to kwboot.

md5sum: 6ce0bbc1aa78a5aaafb5196985aebc47
sha1sum: 3de55e90354ab670d17583b37cf9afc4214239bd
sha256sum: 07f15a654cb9c78657c70a011ed6910f66e1a10a0a6d9230b145a54802261d7d