pengu Wrote:
-------------------------------------------------------
> I've done this now on several boxes and no problem
> s (kirkwood, oxnas armhf, x86)
>
> - changed the /etc/apt/sources.list (replaced "jes
> sie" with "stretch"
> - apt update && apt upgrade && apt dist-upgrade &&
> apt autoremove
>
I did it the same way on Pogo V4, dead on reboot.
I remember there was an output during initramfs generation which told that it cannot recognize filesystem on SDA2, where SDA1 is my boot partition so I ignored it.
I was on Kernel 4.6.1 before. I see that only initramfs-4.6.1-kirkwood-tld-1 has changed in /boot which was not the problem up to now (was changed during many updates).
I used mkimage to create uImage and uInitrd, no change. Kernel loading is initialized correctly as I see in NC
Do you have any ideas?
-------------------------------------------------------
> I've done this now on several boxes and no problem
> s (kirkwood, oxnas armhf, x86)
>
> - changed the /etc/apt/sources.list (replaced "jes
> sie" with "stretch"
> - apt update && apt upgrade && apt dist-upgrade &&
> apt autoremove
>
I did it the same way on Pogo V4, dead on reboot.
I remember there was an output during initramfs generation which told that it cannot recognize filesystem on SDA2, where SDA1 is my boot partition so I ignored it.
I was on Kernel 4.6.1 before. I see that only initramfs-4.6.1-kirkwood-tld-1 has changed in /boot which was not the problem up to now (was changed during many updates).
I used mkimage to create uImage and uInitrd, no change. Kernel loading is initialized correctly as I see in NC
Do you have any ideas?