Exiting. uBoot was not installed "E02 Pogo" (2 replies)

By typing ok, you agree to assume all liabilities and risks
associated with running this installer.

If you agree, type 'ok' and press ENTER to continue:
Exiting. uBoot was not installed.
-bash-3.2# ls
hbplug.log             resolv.conf            xcehbplug
install_uboot_mtd0.sh  var
-bash-3.2# rm install_uboot_mtd0.sh
-bash-3.2# cd /tmp
-bash-3.2# wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh
Connecting to jeff.doozan.com (50.116.34.13:80)
install_uboot_mtd0.s 100% |*******************************| 18406  --:--:-- ETA
-bash-3.2# chmod +x install_uboot_mtd0.sh
-bash-3.2# ./install_uboot_mtd0.sh


!!!!!!  DANGER DANGER DANGER DANGER DANGER DANGER  !!!!!!

If you lose power to your device while running this script,
it could be left in an unusable state.

This script will replace the bootloader on /dev/mtd0.

This installer will only work on the following devices:
 Seagate Dockstar
 Seagate GoFlex Net
 Seagate GoFlex Home
 Pogoplug v1
 Pogoplug Pink (v2)
Do not run this installer on any other device.

By typing ok, you agree to assume all liabilities and risks
associated with running this installer.

If you agree, type 'ok' and press ENTER to continue:
Exiting. uBoot was not installed.
-bash-3.2#