Hey guys thought this might be relevent for a few people who have lower end kirkwoods e.g. Pogoplug v4 (unsure ov v2 and v3 as i dont have them) :)
to change clock speed there are several 0Ω resisters(they are not actual resisters but rather jumpers) NOT soldered to the board that set the cpu multiplier Now im unsure as to exactly where all of them are BUT i have a few hints ive found over at archlinux forums... I wont post a link here BUT if you want i can post the information from original source refered to on archlinux forums (a german blog, needs translating) also i plan on testing several resisters NOT soldered to my GFH (wish me luck) its well equipped for a good oc :P i have fixed a permanant laptop heatsync to it which is likely overkill but none the less look mean as hell :P
to change clock speed there are several 0Ω resisters(they are not actual resisters but rather jumpers) NOT soldered to the board that set the cpu multiplier Now im unsure as to exactly where all of them are BUT i have a few hints ive found over at archlinux forums... I wont post a link here BUT if you want i can post the information from original source refered to on archlinux forums (a german blog, needs translating) also i plan on testing several resisters NOT soldered to my GFH (wish me luck) its well equipped for a good oc :P i have fixed a permanant laptop heatsync to it which is likely overkill but none the less look mean as hell :P