Ix4-200d and kernel above 4.10.9 problem (4 replies)

I all, i want to upgrade my kernel on my Iomega ix4-200d, but for the moment any kernel above 4.10.9 won't boot.
I've made some test and the only two things I think problematic might be:
A different configuration parameter after 4.10.9
Or a question of size, because 4.10.9 is 3.3MB and 4.11.3 is more than 3.7MB.

I of course used the kernels provided on the forum by bohdi.
I just used the preparation with DTB file embedded.

This is the first log i have with a non working kernel.

## Booting image at 00800000 ...
   Image Name:   Linux-4.11.3-kirkwood-tld-2
   Created:      2019-04-08  21:02:52 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3911108 Bytes =  3.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
   Image Name:   initrd.img-4.11.3-kirkwood-tld-2
   Created:      2019-04-08  21:03:16 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    10127512 Bytes =  9.7 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

And this is the last working kernel.

## Booting image at 00800000 ...
   Image Name:   Linux-4.10.9-kirkwood-tld-1
   Created:      2019-04-08  20:26:43 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3423780 Bytes =  3.3 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
   Image Name:   initrd.img-4.10.9-kirkwood-tld-1
   Created:      2019-04-08  20:27:18 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    10632592 Bytes = 10.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.