Pogoplug v4 doesn't connect to network (1 reply)

Hi Friends,

First, thanks for all the work you have done here: pretty amazing!

I have recently followed the instructions here https://forum.doozan.com/read.php?3,12381 to add the most current u-boot to a pogoplug v4 and then followed the instructions here https://forum.doozan.com/read.php?2,12096 to put Debian onto a flashdrive and now, while the pogoplug appears to boot, it does not seem to be connecting to my network.

Regrettably, I did not save the log for the setup and I do not have a serial connection to the pogoplug at this time.

Taking that into account, the device appears to have booted all the way to Debian since the light on the front of the device starts blinking green when I power-on the pogoplug and continues blinking until the light on the flashdrive blinks (presumably this means the pogoplug has found the flashdrive) then the pogoplug's light turns a combination of red and green until it finally goes solid green. When I look for the device on my router it does not show up. The ethernet port's lights blink during the booting process.

I wonder if there might be something I could do to fix this without have the serial connection?

with many thanks,
leon