I recently used the serial port and tftp to update the uboot on a Pogoplug E02 to the 2017.07 U-Boot Kirkwood version. It seemed to go well but the result was no Ethernet port activity after rebooting. I get a brief flash of the port status and speed LEDs after a reset but they're otherwise dark. My router does not notice the Pogoplug and all pings from the Pogoplug fail.
I checked the printenv results and they match the pre-update values: ethact=egig0, ethaddr matches the MAC printed on the Pogoplug sticker, and ipaddr is within the address range of the router. Pluging in a USB stick with Debian boots all the way to the user login (using the serial port) but doesn't seem to make the Ethernet port do anything either.
The Ethernet port did work prior to the uboot update. Any ideas as to what I should be looking for?
I checked the printenv results and they match the pre-update values: ethact=egig0, ethaddr matches the MAC printed on the Pogoplug sticker, and ipaddr is within the address range of the router. Pluging in a USB stick with Debian boots all the way to the user login (using the serial port) but doesn't seem to make the Ethernet port do anything either.
The Ethernet port did work prior to the uboot update. Any ideas as to what I should be looking for?