ix2-200 wont see RAID1 (3 replies)

Now that my boot up issues are resolved per https://forum.doozan.com/read.php?2,95424, thank you very much @bodhi

I have new issue trying to migrate to RAID1 as shown here https://forum.doozan.com/read.php?2,27308

Made new uInitrd and flashed to NAND after initramfs updated from

dpkg-reconfigure mdadm

But uBoot hates it

NAND read: device 0 offset 0x100000, size 0x500000
 5242880 bytes read: OK

NAND read: device 0 offset 0x1000000, size 0xe00000
 14680064 bytes read: ERROR
## Booting image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-14  20:02:37 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975352 Bytes =  4.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2020-02-27  22:14:03 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    10249645 Bytes =  9.8 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... Bad Data CRC

Not to worry I can still boot from my USB, and even reflash the working uInitrd (without RAID support)..

But why does this one fail checksum?

Here's my process

root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00004000 "uboot"
mtd1: 00020000 00004000 "uboot_env"
mtd2: 00500000 00004000 "uImage"
mtd3: 00e00000 00004000 "uInitrd"
root@debian:~# cd /boot
root@debian:/boot# mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.2.9-kirkwood-tld-1 -d initrd.img-5.2.9-kirkwood-tld-1 uInitrd
Image Name:   initramfs-5.2.9-kirkwood-tld-1
Created:      Thu Feb 27 15:58:12 2020
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    10249645 Bytes = 10009.42 KiB = 9.77 MiB
Load Address: 00000000
Entry Point:  00000000
root@debian:/boot# flash_erase /dev/mtd3 0 0
Erasing 16 Kibyte @ 954000 -- 66 % complete flash_erase: Skipping bad block at 00958000
Erasing 16 Kibyte @ dfc000 -- 100 % complete
root@debian:/boot# nandwrite -p /dev/mtd3 /boot/uInitrd
Writing data to block 0 at offset 0x0
...... [removed for brevity]
root@debian:/boot#