Could someone get 1Gb to work reliably?
When I'm trying to use NAS326 through wall outlet, it eventually starts spamming errors like this
https://forum.turris.cz/t/mvneta-ethernet-eth1-bad-rx-status/5479
Then it can show "cable may be defective" error and degrades to 100mbps.
If I'm connecting it directly to the router -> no errors in dmesg. But the problem still appears - after some time it switches from 1Gb to 100mbps.
I tried different cables and different hardware. The problem only appears with NAS326.
P.S. I didn't check what happen on the stock OS (I'll try when I get physical access to nas).
When I'm trying to use NAS326 through wall outlet, it eventually starts spamming errors like this
2017-10-24T21:25:38+02:00 err kernel[]: [496485.750253] mvneta f1034000.ethernet eth1: bad rx status 0f810000 (crc error), size=938
https://forum.turris.cz/t/mvneta-ethernet-eth1-bad-rx-status/5479
Then it can show "cable may be defective" error and degrades to 100mbps.
If I'm connecting it directly to the router -> no errors in dmesg. But the problem still appears - after some time it switches from 1Gb to 100mbps.
I tried different cables and different hardware. The problem only appears with NAS326.
P.S. I didn't check what happen on the stock OS (I'll try when I get physical access to nas).