Hello, please excuse my bad english.
I have try to use Debin on a NSA320 like https://forum.doozan.com/read.php?2,12096
I have Installed the uboot
uboot
For USB Stick i have used Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
in another Try Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
at every start i get the following error message and the system freezes
can it be that the kernel is not for the nsa320?
greetings armin
I have try to use Debin on a NSA320 like https://forum.doozan.com/read.php?2,12096
I have Installed the uboot
uboot
version U-Boot 2016.05-tld-1 (Jun 12 2016 - 13:52:06 -0700) ZyXEL NSA320 2-Bay Power Media Server gcc (Debian 4.9.2-10) 4.9.2 GNU ld (GNU Binutils for Debian) 2.25"]
For USB Stick i have used Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
in another Try Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
at every start i get the following error message and the system freezes
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 2048 31297536 1592d73c-01 83
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **
3821592 bytes read in 488 ms (7.5 MiB/s)
7245696 bytes read in 652 ms (10.6 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-4.12.1-kirkwood-tld-1
Created: 2017-07-20 8:11:24 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3821528 Bytes = 3.6 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-4.12.1-kirkwood-tld-1
Created: 2017-07-24 0:18:23 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 7245632 Bytes = 6.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Error: unrecognized/unsupported machine ID (r1 = 0x00000f74).
Available machine support:
ID (hex) NAME
ffffffff Generic DT based system
ffffffff Marvell Kirkwood (Flattened Device Tree)
Please check your kernel config and/or bootloader.
can it be that the kernel is not for the nsa320?
greetings armin