Having trouble finding where to begin.
I have stock u-boot NSA-320
Tried to do simple install from USB stick as described on ArchLinux. Not that I wanted arch, i just didn't search long enough to find this group here.
Of course as I have seen mentioned couple of times in this forum since i made that mistake, that I was not supposed to use the Latest rootfs as the link on ArchLinux says.
So i was stuck with all the Nas lights on and nobody home (so to speak)
Was able to use mincom from connected rpito command "run to_stock" to get back to start point.
When I use kwboot to boot the recommended u-boot(uboot.2017.07-tld-1.nsa320.mtd0.kwb -p), system halts after 100% load.
I have since followed the steps in this thread and created rootfs on a usb stick, loaded with "Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2" but since I do not know how to get the U-boot to boot, i have been stuck.
I have stock u-boot NSA-320
Tried to do simple install from USB stick as described on ArchLinux. Not that I wanted arch, i just didn't search long enough to find this group here.
Of course as I have seen mentioned couple of times in this forum since i made that mistake, that I was not supposed to use the Latest rootfs as the link on ArchLinux says.
So i was stuck with all the Nas lights on and nobody home (so to speak)
Was able to use mincom from connected rpito command "run to_stock" to get back to start point.
When I use kwboot to boot the recommended u-boot(uboot.2017.07-tld-1.nsa320.mtd0.kwb -p), system halts after 100% load.
I have since followed the steps in this thread and created rootfs on a usb stick, loaded with "Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2" but since I do not know how to get the U-boot to boot, i have been stuck.