Hi bodhi,
I am trying to turn my lenovo ix-ng into a OMV4 nas.
I browsed the forum and didn't find out whoever has my issue so I started a new thread for this question.
I saw fcollingwood's instruction from https://forum.doozan.com/read.php?2,94014
I also saw your notes there so I will skip the envs setting from there.
Before I follow fcollingwood's guide I think I will need your guide to "tailor" my ix2-ng first. I do found this device is being supported in https://forum.doozan.com/read.php?2,12096
I started follow your instruction but I stucked at first step which is backup the current uImage and uInitrd in the /boot directory. I couldn't find anything from my /boot directory. below is the what I found from my device.
I don't know if there is anything wrong with my device but below the booting.
Thanks for your help in advance.
Codier
I am trying to turn my lenovo ix-ng into a OMV4 nas.
I browsed the forum and didn't find out whoever has my issue so I started a new thread for this question.
I saw fcollingwood's instruction from https://forum.doozan.com/read.php?2,94014
I also saw your notes there so I will skip the envs setting from there.
Before I follow fcollingwood's guide I think I will need your guide to "tailor" my ix2-ng first. I do found this device is being supported in https://forum.doozan.com/read.php?2,12096
I started follow your instruction but I stucked at first step which is backup the current uImage and uInitrd in the /boot directory. I couldn't find anything from my /boot directory. below is the what I found from my device.
root@ix2:/boot# ls System.map-2.6.31.8 images lost+found
I don't know if there is anything wrong with my device but below the booting.
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** ix2-spi ** ** uboot_ver:0.0.8 **
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Oct 28 2011 - 15:18:22) Marvell version: 3.6.1 - EMC
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CD5A0
Soc: 88F6282 A1 CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 256MB
DRAM Total size 256MB 16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Found ADT7473, program PWM1 ... OK
[1024kB@f8000000] Flash: 1 MB
Marvell Serial ATA Adapter
Integrated Sata device found
[0 0 0]: Enable DMA mode (6)
Device 0 @ 0 0:
Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
[0 1 0]: Enable DMA mode (6)
Device 1 @ 0 1:
Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
CPU : Marvell Feroceon (Rev 1)
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: interface detected no Link.
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
[0 0 0]: Enable DMA mode (6)
Device 0 @ 0 0:
Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80 Ser#: WD-WCC4M3FUSU3R
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
[0 1 0]: Enable DMA mode (6)
Device 1 @ 0 1:
Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80 Ser#: WD-WCC4N0YXE7XZ
Type: Hard Disk
Supports 48-bit addressing
Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
IDE read: device 0 block # 2048, count 6144 ... 6144 blocks read: OK
IDE read: device 0 block # 8192, count 6144 ... 6144 blocks read: OK
## Booting image at 00040000 ...
Image Name: Linux-2.6.31.8
Created: 2017-10-13 11:13:05 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2502872 Bytes = 2.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00900000 ...
Image Name:
Created: 2017-10-13 11:49:00 UTC
Image Type: ARM Linux RAMDisk Image (bzip2 compressed)
Data Size: 2996455 Bytes = 2.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Linux version 2.6.31.8 (soho@bsoho080.iomegacorp.com) (gcc version 4.7.2 (crosstool-NG 1.20.0) ) Fri Oct 13 07:13:01 EDT 2017 v0.0.9 Fri Oct 13 07:13:01 EDT 2017
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 64960
Kernel command line: console=ttyS0,115200 root=/dev/ram0 mtdparts=spi_flash:0x7e000@0(u-boot),0x1000@0x7f000(env),0x1000@0x7e000(env2) :::DB88FXX81:eth0:none
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 244352KB available (4592K code, 365K data, 136K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
xor: measuring software checksum speed
arm4regs : 1447.200 MB/sec
8regs : 867.600 MB/sec
32regs : 1120.800 MB/sec
xor: using function: arm4regs (1447.200 MB/sec)
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size 1MB
PEX1_MEM ....base e8000000, size 128MB
PEX1_IO ....base f2100000, size 1MB
INTER_REGS ....base f1000000, size 1MB
NFLASH_CS ....base fa000000, size 2MB
SPI_CS ....base f4000000, size 16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size 2MB
Marvell Development Board (LSP Version KW_LSP_5.1.3_patch25)-- DB-88F6282A-BP Soc: 88F6282 A1 LE
Detected Tclk 200000000 and SysClk 533333333
MV Buttons Device Load
Marvell USB EHCI Host controller #0: c8040740
PEX0 interface detected no Link.
PEX1 interface detected no Link.
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 125 MB/s
raid6: int32x2 157 MB/s
raid6: int32x4 162 MB/s
raid6: int32x8 159 MB/s
raid6: using algorithm int32x4 (162 MB/s)
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 2924K
rtc mv_rtc: rtc core: registered kw-rtc as rtc0
RTC registered
XOR registered 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c000ed58)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
MV Buttons Driver Load
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering unionfs 2.5.11 (for 2.6.31.14)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 483
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
alg: No test for hmac(digest_null) (hmac(digest_null-generic))
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012100 (irq = 34) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Integrated Sata device found
IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access WDC WD20EZRX-00D8PB0 80.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access WDC WD20EZRX-00D8PB0 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 0-byte physical blocks
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 0-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
Loading Marvell Ethernet Driver:
o Cached descriptors in DRAM
o DRAM SW cache-coherency
o 2 Giga ports supported
o Single RX Queue support - ETH_DEF_RXQ=0
o Single TX Queue support - ETH_DEF_TXQ=0
o TCP segmentation offload (TSO) supported
o Large Receive offload (LRO) supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Proc tool API enabled
o Rx descripors: q0=256
o Tx descripors: q0=532
o Loading network interface(s):
o register under mv88fx_eth platform
sda:
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
o eth0, ifindex = 2, GbE port = 0
Warning: Giga 1 is Powered Off
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
SPI Serial flash detected @ 0xf4000000, 1024KB (256sec x 4KB)
3 cmdlinepart partitions found on MTD device spi_flash
Creating 3 MTD partitions on "spi_flash":
0x000000000000-0x00000007e000 : "u-boot"
sdb:
0x00000007f000-0x000000080000 : "env"
0x00000007e000-0x00000007f000 : "env2"
Using Hamming 1-bit ECC for NAND device
No NAND device found!!!
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
sda1 sda2
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
sd 0:0:0:0: [sda] Attached SCSI disk
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:3907029166 != 3907029167
GPT:Alternate GPT header not at the end of the disk.
GPT:3907029166 != 3907029167
GPT: Use GNU Parted to correct GPT errors.
sdb1 sdb2
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
sd 1:0:0:0: [sdb] Attached SCSI disk
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
adt7473 0-002e: adt7473 chip found
iBoard_model 2
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 5
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
rtc mv_rtc: setting system clock to 2021-06-15 03:59:44 UTC (1623729584)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: bzip2 image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem) on device 1:0.
Looking for shell in cmdline: console=ttyS0,115200 root=/dev/ram0 mtdparts=spi_flash:0x7e000@0(u-boot),0x1000@0x7f000(env),0x1000@0x7e000(env2) :::DB88FXX81:eth0:none
Make node for mtd devices
HDD /dev/sda detected
HDD /dev/sdb detected
sh: mtd5: unknown operand
Create fw_env.config in /etc
Model name is ix2-ng
UUID_1 = 9bfd355b:bc90b3ae:a4d6cddb:ba17ca4a, size = 41943041
UUID_2 = 9bfd355b:bc90b3ae:a4d6cddb:ba17ca4a, size = 41943041
Valid Disk 1 in md0: /dev/sda1
Valid Disk 2 in md0: /dev/sdb1
USB Device node is /dev/sdc1
Checking to see the if the reset button is pressed or not
Checking for valid image on system
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 21457928192
md0:: /dev/md0 has been started with 2 drives.
unknown partition table
md: md0 stopped.
md: unbind<sda1>
md: export_rdev(sda1)
md: unbind<sdb1>
md: export_rdev(sdb1)
md0: detected capacity change from 21457928192 to 0
mdadm: stopped /dev/md0
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 21457928192
mdadm: /dev/md0 has been started with 2 drives.
md0: unknown partition table
2 logical volume(s) in volume group "md0_vg" now active
e2fsck 1.42.5 (29-Jul-2012)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/md0_vg/BFDlv is mounted.
/dev/md0_vg/BFDlv: clean, 16/262144 files, 211618/1048576 blocks
Copy dev node to /sysroot/dev
Found Valid EMC Image in disk...
Mounting apps image...
Mounting config image...
Check config filesystem
e2fsck 1.42.5 (29-Jul-2012)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/loop1 is mounted.
Copying System.map...
No need to create fw_env.config
No need to create fw_env.config
Constructing root filesystem...
Bootstrapping ...
rootdir=/
table='/usr/local/cfg/device_table.txt'
makedevs: line 42: chown failed for /bin/busybox: Read-only file system
makedevs: line 49: regular file '/usr/share/udhcpc/default.script' does not exist: No such file or directory
makedevs: line 55: Couldnt create node /dev/null: File exists
makedevs: line 56: Couldnt create node /dev/zero: File exists
makedevs: line 58: Couldnt create node /dev/urandom: File exists
makedevs: line 61: Couldnt create node /dev/loop0: File exists
makedevs: line 61: Couldnt create node /dev/loop1: File exists
makedevs: line 61: Couldnt create node /dev/loop2: File exists
makedevs: line 64: Couldnt create node /dev/console: File exists
makedevs: line 66: Couldnt create node /dev/tty2: File exists
makedevs: line 66: Couldnt create node /dev/tty3: File exists
makedevs: line 66: Couldnt create node /dev/tty4: File exists
makedevs: line 71: Couldnt create node /dev/ttyS0: File exists
makedevs: line 71: Couldnt create node /dev/ttyS1: File exists
makedevs: line 86: Couldnt create node /dev/mtd0: File exists
makedevs: line 86: Couldnt create node /dev/mtd1: File exists
makedevs: line 86: Couldnt create node /dev/mtd2: File exists
makedevs: line 86: Couldnt create node /dev/mtd3: File exists
makedevs: line 86: Couldnt create node /dev/mtd4: File exists
makedevs: line 86: Couldnt create node /dev/mtd5: File exists
makedevs: line 123: Couldnt create node /dev/sda: File exists
makedevs: line 124: Couldnt create node /dev/sda1: File exists
makedevs: line 125: Couldnt create node /dev/sdb: File exists
makedevs: line 126: Couldnt create node /dev/sdb1: File exists
makedevs: line 127: Couldnt create node /dev/sdc: File exists
makedevs: line 128: Couldnt create node /dev/sdc1: File exists
makedevs: line 190: Couldnt create node /dev/md0: File exists
makedevs: line 191: Couldnt create node /dev/md1: File exists
warning: failed to read mtab
Loading ext4...
Loading xfs...
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Loading isofs...
Loading udf...
Loading ufsd...
ufsd: module license 'Commercial product' taints kernel.
Disabling lock debugging due to kernel taint
ufsd: driver 8.5 (Oct 13 2017 07:28:48) LBD=ON with delayalloc with ioctl loaded at bf102000
NTFS support included
Hfs+/HfsX support included
Built for: EMC_ix2_2Loading btusb...
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
## Error: "hwdata" not defined
Initialization complete.
Freeing init memory: 136K
INIT: version 2.88 booting
INIT: /etc/inittab[63]: missing action field
Running file /etc/init.d/rcS
Running file /etc/init.d/rc
Running file /etc/rcS.d/S02hostname.sh
Running file /etc/rcS.d/S02mountkernfs.sh
[FAIL] udev requires a kernel >= 2.6.32, not started ... failed!
failed!
Running file /etc/rcS.d/S04mountdevsubfs.sh
Running file /etc/rcS.d/S07hdparm
[ ok ] Setting parameters of disc: (none).
Running file /etc/rcS.d/S11hwclock.sh
[info] Setting the system clock.
[info] System Clock set to: Tue Jun 15 04:00:08 UTC 2021.
Running file /etc/rcS.d/S12mtab.sh
Running file /etc/init.d/mountkernfs.sh
Running file /etc/init.d/mountkernfs.sh
Running file /etc/init.d/mountdevsubfs.sh
Running file /etc/init.d/mountdevsubfs.sh
Running file /etc/rcS.d/S30checkfs.sh
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck 1.42.5 (29-Jul-2012)
done.
Running file /etc/rcS.d/S30procps
[....] Setting kernel variables ...Running file /etc/rcS.d/S35mountall.sh
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
Running file /etc/rcS.d/S36mountall-bootclean.sh
[ ok ] Cleaning up temporary files... /tmp.
Running file /etc/rcS.d/S36udev-mtab
dhclient host identical
Running file /etc/rcS.d/S40networking
[ ok ] Configuring network interfaces...done.
Running file /etc/rcS.d/S43rpcbind
[ ok ] Starting rpcbind daemon....
Running file /etc/rcS.d/S44nfs-common
[FAIL] Starting NFS common utilities: statd failed!
Running file /etc/rcS.d/S45mountnfs.sh
Running file /etc/rcS.d/S46mountnfs-bootclean.sh
[ ok ] Cleaning up temporary files....
Running file /etc/rcS.d/S55bootmisc.sh
Running file /etc/rcS.d/S55urandom
INIT: Entering runlevel: 2
Running file /etc/init.d/rc
Running file /etc/rc2.d/S10rsyslog
[ ok ] Starting enhanced syslogd: rsyslogd.
Running file /etc/rc2.d/S12dbus
chown: invalid user: `messagebus'
Running file /etc/rc2.d/S20nfs-common
[FAIL] Starting NFS common utilities: statd failed!
Running file /etc/rc2.d/S20nfs-kernel-server
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
Running file /etc/rc2.d/S20smartmontools
Running file /etc/rc2.d/S20sysfsutils
[ ok ] Setting sysfs variables....
Running file /etc/rc2.d/S23ntp
[....] Starting NTP server: ntpdRunning file /etc/rc2.d/S25bluetooth
[....] Starting bluetooth: bluetoothd rfcommBluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
. ok
Starting netplugd...
eth0: link down
eth0: started
eth0: link up, full duplex, speed 1 Gbps
ln: failed to create symbolic link `/etc/samba/smb.conf': File exists
ln: failed to create symbolic link `/tmp/samba/account_policy.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/group_mapping.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/login_cache.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/netsamlogon_cache.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/ntdrivers.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/ntforms.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/ntprinters.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/share_info.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/winbindd_idmap.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/winbindd_cache.tdb': File exists
ln: failed to create symbolic link `/tmp/samba/wins.dat': File exists
ln: failed to create symbolic link `/tmp/samba/locking.tdb': File exists
Starting sshd: OK
hostnamed begin to start...
Checking Netwrok interface link status...
Network Link is Available...
IP obtained
## Error: "hwdata" not defined
hostnamed finished
Starting executord - appmd
export proxy environmental variables
Done.
Running file /etc/rc2.d/S99rc.local
Running file /etc/rc2.d/S99rmnologin
Debian GNU/Linux 7 ix2 ttyS0
ix2 login: md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 1978754990080
md1: unknown partition table
EXT4-fs (dm-1): barriers enabled
kjournald2 starting: pid 3744, dev dm-1:8, commit interval 5 seconds
EXT4-fs (dm-1): internal journal on dm-1:8
EXT4-fs (dm-1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-1): mounted filesystem with ordered data mode
EXT4-fs (dm-2): barriers disabled
kjournald2 starting: pid 3748, dev dm-2:8, commit interval 5 seconds
EXT4-fs (dm-2): internal journal on dm-2:8
EXT4-fs (dm-2): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-2): mounted filesystem with ordered data mode
Adding 524280k swap on /mnt/system/swapfile. Priority:-1 extents:3 across:540664k
Debian GNU/Linux 7 ix2 ttyS0
Thanks for your help in advance.
Codier