trying to unbrick a Zyxel NSA310 fails with below message.
No idea whats wrong. The serial worked before I bricked the device.
Any body an idea?
kwboot -t -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p
Sending boot message. Please reboot the target...\
Sending boot image...
0 % [+++++++++++++++++xmodem: Bad message
No idea whats wrong. The serial worked before I bricked the device.
Any body an idea?
kwboot -t -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p
Sending boot message. Please reboot the target...\
Sending boot image...
0 % [+++++++++++++++++xmodem: Bad message