Hi,
I was tempted to upload a new image from debian from http://seafile.servator.de/nas/zyxel/images/
after uploading to the SD card debian-nas-bullseye-21.214-armhf.img.gz the system started correctly.
In the next step I did a kernel upgrade to linux-image-3.2.102-1-nas5xx-armhf.zip and unfortunately it did not work properly.
As recommended before rebooting, I ran the rollback routine sudo / firmware / sbin / info_setenv next_bootfrom 1
Errors have occurred and the NAS has restarted.
He has fallen into a noose since then and I cannot save him.
I tried:
- universal_usb_key_func-2015-10-12
- NAS540_521AATB3C0_Upgradekey
- I connected the serial port but the kosola only shows "bushes" and the NAS restarts.
I am asking you for help and suggestions.
manticore
I was tempted to upload a new image from debian from http://seafile.servator.de/nas/zyxel/images/
after uploading to the SD card debian-nas-bullseye-21.214-armhf.img.gz the system started correctly.
In the next step I did a kernel upgrade to linux-image-3.2.102-1-nas5xx-armhf.zip and unfortunately it did not work properly.
As recommended before rebooting, I ran the rollback routine sudo / firmware / sbin / info_setenv next_bootfrom 1
Errors have occurred and the NAS has restarted.
He has fallen into a noose since then and I cannot save him.
I tried:
- universal_usb_key_func-2015-10-12
- NAS540_521AATB3C0_Upgradekey
- I connected the serial port but the kosola only shows "bushes" and the NAS restarts.
I am asking you for help and suggestions.
manticore