I've been running a Debian Wheezy install based on bodhi's 3.10.4 kernel/rootfs since September or so and everything's been working great. Of course that meant I just had to go and fiddle with things. I upgraded to the newest (3.13.1) kernel, followed the directions to the letter, went to reboot and ... nothing. The Dockstar's light doesn't turn on at all and the light on the USB drive holding the rootfs flashes on once then stays off. I tried to see what it was doing via netconsole (which I have setup according to the guide and has worked previously), but got nothing. I thought I might have misremembered the IP address it was supposed to send to, so I plugged it into my laptop with a crossover cable, and see no activity from it as it boots up. I also tried it with a different power brick just to make sure that wasn't the issue.
The only thing that I can think of is that there might be something wrong with the onboard flash. It stopped being able to boot into the Seagate distro on mtd over a year ago and I almost wrote it off for dead at that point, but it was apparently still able to boot from USB.
So my questions are:
The only thing that I can think of is that there might be something wrong with the onboard flash. It stopped being able to boot into the Seagate distro on mtd over a year ago and I almost wrote it off for dead at that point, but it was apparently still able to boot from USB.
So my questions are:
- When does the LED first come on in the boot process?
- Is there anything worth trying without a serial or JTAG cable that I haven't thought of?
- Is it worth putting together a serial cable and trying to revive it, or is it probably dead?