I have a working debian wheezy system on my goflex.net. I'm running on a ext2 formatted usb drive. The uboot I am using came from here: http://projects.doozan.com/uboot/ today. The kernel I am running is 3.2.0-4-kirkwood. Unfortunately when I plug in a sata drive it is not seen by the system. I see a few lines about bad erase block in my syslog but nothing about sata drives. I've been fighting with this for quite a while but I'm not making any progress.
From what I've read it seems that the kernel I'm running doesn't work properly on a goflex. I'm not sure what the best way forward is. It looks like I can install the recovery console and load a wheezy system with a newer kernel version. But is there a simpler way forward given that I already have a working wheezy system?
From what I've read it seems that the kernel I'm running doesn't work properly on a goflex. I'm not sure what the best way forward is. It looks like I can install the recovery console and load a wheezy system with a newer kernel version. But is there a simpler way forward given that I already have a working wheezy system?