Hi all,
I bricked my seconde Pogo v4 ( I don't remember how that happen ) and my big problem is when I tried to revert back the stock firmware to mtd0 with serial/UART and tftp I did something wrong and now the pogoplug light wont turn on and I see no boot info on Putty with serial connexion ( just black screen) but at least I see the RJ45 light blinking ( but no ip adress on my router dhcp) and the cpu heat as normal, the last thing I did is :
tftpboot 0x800000 mtd0
nand erase 0x0 0x80000
nand write 0x800000 0x0 0x80000
then I hard rebooted the pogo and it wont come back, I think something happend to the nand flash.
note: I have another pogoplug v4 working on archlinux on a sata hdd .
Do you thing my pogoplug is dead or is there a chance to give it another life ?
I bricked my seconde Pogo v4 ( I don't remember how that happen ) and my big problem is when I tried to revert back the stock firmware to mtd0 with serial/UART and tftp I did something wrong and now the pogoplug light wont turn on and I see no boot info on Putty with serial connexion ( just black screen) but at least I see the RJ45 light blinking ( but no ip adress on my router dhcp) and the cpu heat as normal, the last thing I did is :
tftpboot 0x800000 mtd0
nand erase 0x0 0x80000
nand write 0x800000 0x0 0x80000
then I hard rebooted the pogo and it wont come back, I think something happend to the nand flash.
note: I have another pogoplug v4 working on archlinux on a sata hdd .
Do you thing my pogoplug is dead or is there a chance to give it another life ?