N00B Alert - This only works on Pogoplug E02's AND is only for a Kirkwood device. DO NOT TRY on a Oxnas based Pogoplug like Pro, Biz, V3, etc.
First the Disclaimer
You load this and modify your Plug at your own risk and i assume no responsibility for your lack of knowledge or powerfailure, or any other reason, including using this image and the associated tools to flash your PogoE02 with the associated software and tools, that may lead to a detrimental and none functional unit or experience. All software, scripts, compiled binaries and kudos for such belong to the respective authors -not to me - and are covered by there own respective licences. I claim no ownership over them in any shape or form. I share my efforts in colllating this together; in the ethos and protection of the GNU GPLv3
Right thats out of the way, you get the gist - you break it its your own fault not mine!
The image contains kernel 3.17 and the files you would normally have to download from there respective forum posts. In addition to the default software provided by Bodhi I have included Webmin / Samba / cifs-utils / cron and uboot.2014.07-tld-1.environment.scr in the /boot/ directory to aid recovery if necessary
Prerequisites
Serial console connection to your unit or netconsole setup on the Plug
Functioning install of archlinuxarm on your plug
Spare usb key to load this image on
Cup of coffee or tea or whatever you preferred beverage is.
Knowledge of linux command line
1 create a usb key with the .img file. use dd or whatever you preferred image writing software us
2 Poweron your Plug and boot from the archlinux install
3 logon as root/root
4 plug in the freshly created debian install made in Step 1 to your plug and mount the disk
5 Navigate to the newly mounted disk and change directory to the ./installation directory
6 In this directory you will find the following
. blparam
. mtd0-orig : incase you forget to make your own
. uboot.2014.07-tld-2.environment
. flash_erase
. nanddump
. uboot.2014.07-tld-2.environment.img
. fw_printenv
. nandwrite
. uboot.2014.07-tld-2.pogo_e02.mtd0.kwb
7 Follow the instructions on the below link, you dont need the download section, the files are already here.
http://forum.doozan.com/read.php?3,12381
8. Check check and double check that you have done everything as per the links - then Poweroff your plug
9. With the Plug powered off remove the archlinuxarm usb stick
10. boot from the Debian usb stick
11. Thats it you should now be up and running with the Debian 3.17 kernel and 2014 uboot
12. If all goes completely screwy - come back on here and ask for help
References
http://forum.doozan.com/read.php?2,12096,12096#msg-12096 http://forum.doozan.com/read.php?3,12381 http://forum.doozan.com/read.php?3,19960 http://forum.doozan.com/read.php?3,18105,18124#msg-18124
send me a PM if you want it