I started my E02 after a year or two. Used webmin to update the old packages.
Ran into problems after fuse libfuse2 failed to install.
After this package failed, everything is failing to install. I've left it on so i dont lose connectivity to the box.
I downloaded the latest 4.1 kernel too.
What went wrong? Did the webmin try to install wrong mtd on my e02 and my debian installation is borked?
What should i do? I don't have any spare usb devices right now to even make a new installation.
Ran into problems after fuse libfuse2 failed to install.
Preparing to unpack .../fuse_2.9.4-1_armel.deb ... Unpacking fuse (2.9.4-1) over (2.9.2-4) ... Preparing to unpack .../libfuse2_2.9.4-1_armel.deb ... Unpacking libfuse2:armel (2.9.4-1) over (2.9.2-4) ... Setting up libfuse2:armel (2.9.4-1) ... Setting up fuse (2.9.4-1) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools (0.120) ... update-initramfs: Generating /boot/initrd.img-2.6.32-5-kirkwood DTB: kirkwood-sheevaplug.dtb flash-kernel: installing version 2.6.32-5-kirkwood Generating kernel u-boot image... done. Taking backup of uImage. Installing new uImage. Generating initramfs u-boot image... done. Taking backup of uInitrd. Installing new uInitrd. Couldn't find /usr/lib/linux-image-2.6.32-5-kirkwood/kirkwood-sheevaplug.dtb run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1 dpkg: error processing package initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) .. install failed!
After this package failed, everything is failing to install. I've left it on so i dont lose connectivity to the box.
I downloaded the latest 4.1 kernel too.
What went wrong? Did the webmin try to install wrong mtd on my e02 and my debian installation is borked?
What should i do? I don't have any spare usb devices right now to even make a new installation.