HI,
Been trying this for 2 days followed instructions on http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html never did work right..not sure what went wrong and where to go from here..any help would be appreciated..I do have serial connection
Thank you
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.07.26 12:47:12 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4
SoC: Kirkwood 88F6192_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
MMC: kwsdio: 0
In: serial
Out: serial
Err: serial
Net: egiga0
No link on egiga0
ping failed; host 192.168.1.100 is not alive
Hit any key to stop autoboot: 5 4 3 2 1 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
2461416 bytes read in 436 ms (5.4 MiB/s)
6362802 bytes read in 572 ms (10.6 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:27 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2461352 Bytes = 2.3 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:41 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6362738 Bytes = 6.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Using machid 0xf78 from environment
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Tue Apr 1 22:54:58 PDT 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Pogoplug V4
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sdd1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 116244K/131072K available (4779K kernel code, 352K rwdata, 1644K rodata, 213K init, 424K bss, 14828K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc064df14 (6424 kB)
[ 0.000000] .init : 0xc064e000 - 0xc0683444 ( 214 kB)
[ 0.000000] .data : 0xc0684000 - 0xc06dc3c4 ( 353 kB)
[ 0.000000] .bss : 0xc06dc3c4 - 0xc074665c ( 425 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 7.478704] Console: colour dummy device 80x30
[ 7.478752] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 7.568339] pid_max: default: 32768 minimum: 301
[ 7.568496] Security Framework initialized
[ 7.568596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.568626] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.569522] Initializing cgroup subsys devices
[ 7.569557] Initializing cgroup subsys freezer
[ 7.569575] Initializing cgroup subsys net_cls
[ 7.569591] Initializing cgroup subsys blkio
[ 7.569707] CPU: Testing write buffer coherency: ok
[ 7.570285] Setting up static identity map for 0x485fa0 - 0x485fdc
[ 7.573481] devtmpfs: initialized
[ 7.577487] prandom: seed boundary self test passed
[ 7.583549] prandom: 100 self tests passed
[ 7.583571] pinctrl core: initialized pinctrl subsystem
[ 7.584146] regulator-dummy: no parameters
[ 7.584647] NET: Registered protocol family 16
[ 7.585325] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 7.586510] cpuidle: using governor ladder
[ 7.586536] cpuidle: using governor menu
[ 7.586709] Kirkwood: MV88F6281-A1, TCLK=166666667.
[ 7.586742] Feroceon L2: Enabling L2
[ 7.586793] Feroceon L2: Cache support initialised.
[ 7.587485] POGOPLUGV4: failed to setup USB VBUS GPIO
[ 7.588670] Kirkwood PCIe port 0: link up
[ 7.588686] PCI: bus0 uses PCIe port 0
[ 7.588860] PCI host bridge to bus 0000:00
[ 7.588889] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 7.588907] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 7.588926] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 7.589782] PCI: bus0: Fast back to back transfers disabled
[ 7.589859] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 7.589894] pci 0000:00:01.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit]
[ 7.589925] pci 0000:00:01.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit]
[ 7.596193] bio: create slab <bio-0> at 0
[ 7.596854] vgaarb: loaded
[ 7.597264] usbcore: registered new interface driver usbfs
[ 7.597362] usbcore: registered new interface driver hub
[ 7.597527] usbcore: registered new device driver usb
[ 7.598658] Switched to clocksource orion_clocksource
[ 7.634160] NET: Registered protocol family 2
[ 7.635085] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.635121] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.635151] TCP: Hash tables configured (established 1024 bind 1024)
[ 7.635258] TCP: reno registered
[ 7.635277] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 7.635308] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 7.635588] NET: Registered protocol family 1
[ 7.636042] RPC: Registered named UNIX socket transport module.
[ 7.636056] RPC: Registered udp transport module.
[ 7.636067] RPC: Registered tcp transport module.
[ 7.636077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.636130] PCI: enabling device 0000:00:01.0 (0140 -> 0142)
[ 7.636581] Unpacking initramfs...
[ 8.412050] Freeing initrd memory: 6208K (c1101000 - c1711000)
[ 8.412216] NetWinder Floating Point Emulator V0.97 (double precision)
[ 8.413014] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 8.413238] audit: initializing netlink subsys (disabled)
[ 8.413320] audit: type=2000 audit(0.930:1): initialized
[ 8.414258] bounce pool size: 64 pages
[ 8.414356] zbud: loaded
[ 8.414615] VFS: Disk quotas dquot_6.5.2
[ 8.414691] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.415107] NFS: Registering the id_resolver key type
[ 8.415206] Key type id_resolver registered
[ 8.415220] Key type id_legacy registered
[ 8.415246] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 8.415259] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.415484] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 8.415881] msgmni has been set to 239
[ 8.416061] Key type big_key registered
[ 8.418788] alg: No test for stdrng (krng)
[ 8.418919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 8.418935] io scheduler noop registered
[ 8.418946] io scheduler deadline registered
[ 8.418995] io scheduler cfq registered (default)
[ 8.419406] mv_xor mv_xor.0: Marvell shared XOR driver
[ 8.458748] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.498739] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.498921] mv_xor mv_xor.1: Marvell shared XOR driver
[ 8.538749] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.578746] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.579164] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.600046] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 9.214149] console [ttyS0] enabled
[ 9.219204] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 9.225532] nand: Hynix H27U1G8F2BTR-BC
[ 9.229382] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 9.235028] Scanning device for bad blocks
[ 9.352123] 5 cmdlinepart partitions found on MTD device orion_nand
[ 9.358366] Creating 5 MTD partitions on "orion_nand":
[ 9.363509] 0x000000000000-0x000000200000 : "u-boot"
[ 9.368895] 0x000000200000-0x000000500000 : "uImage"
[ 9.374203] 0x000000500000-0x000000800000 : "uImage2"
[ 9.379658] 0x000000800000-0x000001000000 : "failsafe"
[ 9.385142] 0x000001000000-0x000008000000 : "root"
[ 9.390919] m25p80 spi0.0: m25p05-nonjedec (64 Kbytes)
[ 9.405702] libphy: Fixed MDIO Bus: probed
[ 9.424386] libphy: orion_mdio_bus: probed
[ 9.428615] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 10.507041] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f4:98
[ 10.516028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.522554] ehci-pci: EHCI PCI platform driver
[ 10.527063] ehci-orion: EHCI orion driver
[ 10.531185] orion-ehci orion-ehci.0: EHCI Host Controller
[ 10.536599] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 10.544332] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 10.568703] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 10.574850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.581640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.588854] usb usb1: Product: EHCI Host Controller
[ 10.593716] usb usb1: Manufacturer: Linux 3.14.0-kirkwood-tld-1 ehci_hcd
[ 10.600414] usb usb1: SerialNumber: orion-ehci.0
[ 10.605856] hub 1-0:1.0: USB hub found
[ 10.609675] hub 1-0:1.0: 1 port detected
[ 10.614353] mousedev: PS/2 mouse device common for all mice
[ 10.928733] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 11.080970] usb 1-1: New USB device found, idVendor=154b, idProduct=007a
[ 11.087663] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.094800] usb 1-1: Product: USB 2.0 FD
[ 11.098740] usb 1-1: Manufacturer: PNY Technologies
[ 11.103596] usb 1-1: SerialNumber: AA00000000001424
[ 11.628701] rtc-mv rtc-mv: internal RTC not ticking
[ 11.633720] i2c /dev entries driver
[ 11.638104] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.644098] drop_monitor: Initializing network drop monitor service
[ 11.650658] TCP: cubic registered
[ 11.653964] NET: Registered protocol family 17
[ 11.658537] Key type dns_resolver registered
[ 11.663504] registered taskstats version 1
[ 11.668438] regulator-dummy: incomplete constraints, leaving on
[ 11.674843] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 11.683509] Freeing unused kernel memory: 212K (c064e000 - c0683000)
Loading, please wait...
[ 11.779045] udevd[57]: starting version 175
[ 11.942931] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 11.948181] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 12.067662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.086228] mvsdio mvsdio: no pins associated
[ 12.104337] SCSI subsystem initialized
[ 12.123222] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.155352] usb usb2: Product: xHCI Host Controller
[ 12.168813] mvsdio mvsdio: using GPIO for card detection
[ 12.177980] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 12.195643] sata_mv sata_mv.0: cannot get optional clkdev
[ 12.208807] usb usb2: Manufacturer: Linux 3.14.0-kirkwood-tld-1 xhci_hcd
[ 12.215489] usb usb2: SerialNumber: 0000:00:01.0
[ 12.243510] scsi0 : usb-storage 1-1:1.0
[ 12.248892] sata_mv sata_mv.0: slots 32 ports 1
[ 12.265000] usbcore: registered new interface driver usb-storage
[ 12.287367] hub 2-0:1.0: USB hub found
[ 12.297517] scsi1 : sata_mv
[ 12.307291] ata1: SATA max UDMA/133 irq 21
[ 12.314053] hub 2-0:1.0: 2 ports detected
[ 12.340081] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 12.345313] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 12.396108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 12.423245] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.446250] usb usb3: Product: xHCI Host Controller
[ 12.451290] usb usb3: Manufacturer: Linux 3.14.0-kirkwood-tld-1 xhci_hcd
[ 12.457970] usb usb3: SerialNumber: 0000:00:01.0
[ 12.464080] hub 3-0:1.0: USB hub found
[ 12.467876] hub 3-0:1.0: 2 ports detected
[ 12.678721] ata1: SATA link down (SStatus 0 SControl F300)
[ 13.684757] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
[ 13.733926] sd 0:0:0:0: [sda] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
[ 13.743278] sd 0:0:0:0: [sda] Write Protect is off
[ 13.748613] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.753979] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.765383] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.770747] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.778096] sda: sda1
[ 13.784385] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.789776] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.795852] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.816434] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sdd1 does not exist. Dropping to a shell!
modprobe: module i8042 not found in modules.dep
[ 73.729999] uhci_hcd: USB Universal Host Controller Interface driver
[ 73.749910] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 73.770924] usbcore: registered new interface driver usbhid
[ 73.776486] usbhid: USB HID core driver
BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) k
Been trying this for 2 days followed instructions on http://blog.qnology.com/2014/07/hacking-pogoplug-v4-series-4-and-mobile.html never did work right..not sure what went wrong and where to go from here..any help would be appreciated..I do have serial connection
Thank you
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.07.26 12:47:12 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4
SoC: Kirkwood 88F6192_A1
DRAM: 128 MiB
WARNING: Caches not enabled
NAND: 128 MiB
MMC: kwsdio: 0
In: serial
Out: serial
Err: serial
Net: egiga0
No link on egiga0
ping failed; host 192.168.1.100 is not alive
Hit any key to stop autoboot: 5 4 3 2 1 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
2461416 bytes read in 436 ms (5.4 MiB/s)
6362802 bytes read in 572 ms (10.6 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:27 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2461352 Bytes = 2.3 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:41 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6362738 Bytes = 6.1 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Using machid 0xf78 from environment
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Tue Apr 1 22:54:58 PDT 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Pogoplug V4
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sdd1 rootdelay=30 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 116244K/131072K available (4779K kernel code, 352K rwdata, 1644K rodata, 213K init, 424K bss, 14828K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc064df14 (6424 kB)
[ 0.000000] .init : 0xc064e000 - 0xc0683444 ( 214 kB)
[ 0.000000] .data : 0xc0684000 - 0xc06dc3c4 ( 353 kB)
[ 0.000000] .bss : 0xc06dc3c4 - 0xc074665c ( 425 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 25769803770ns
[ 7.478704] Console: colour dummy device 80x30
[ 7.478752] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[ 7.568339] pid_max: default: 32768 minimum: 301
[ 7.568496] Security Framework initialized
[ 7.568596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.568626] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.569522] Initializing cgroup subsys devices
[ 7.569557] Initializing cgroup subsys freezer
[ 7.569575] Initializing cgroup subsys net_cls
[ 7.569591] Initializing cgroup subsys blkio
[ 7.569707] CPU: Testing write buffer coherency: ok
[ 7.570285] Setting up static identity map for 0x485fa0 - 0x485fdc
[ 7.573481] devtmpfs: initialized
[ 7.577487] prandom: seed boundary self test passed
[ 7.583549] prandom: 100 self tests passed
[ 7.583571] pinctrl core: initialized pinctrl subsystem
[ 7.584146] regulator-dummy: no parameters
[ 7.584647] NET: Registered protocol family 16
[ 7.585325] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 7.586510] cpuidle: using governor ladder
[ 7.586536] cpuidle: using governor menu
[ 7.586709] Kirkwood: MV88F6281-A1, TCLK=166666667.
[ 7.586742] Feroceon L2: Enabling L2
[ 7.586793] Feroceon L2: Cache support initialised.
[ 7.587485] POGOPLUGV4: failed to setup USB VBUS GPIO
[ 7.588670] Kirkwood PCIe port 0: link up
[ 7.588686] PCI: bus0 uses PCIe port 0
[ 7.588860] PCI host bridge to bus 0000:00
[ 7.588889] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 7.588907] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 7.588926] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 7.589782] PCI: bus0: Fast back to back transfers disabled
[ 7.589859] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 7.589894] pci 0000:00:01.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit]
[ 7.589925] pci 0000:00:01.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit]
[ 7.596193] bio: create slab <bio-0> at 0
[ 7.596854] vgaarb: loaded
[ 7.597264] usbcore: registered new interface driver usbfs
[ 7.597362] usbcore: registered new interface driver hub
[ 7.597527] usbcore: registered new device driver usb
[ 7.598658] Switched to clocksource orion_clocksource
[ 7.634160] NET: Registered protocol family 2
[ 7.635085] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.635121] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 7.635151] TCP: Hash tables configured (established 1024 bind 1024)
[ 7.635258] TCP: reno registered
[ 7.635277] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 7.635308] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 7.635588] NET: Registered protocol family 1
[ 7.636042] RPC: Registered named UNIX socket transport module.
[ 7.636056] RPC: Registered udp transport module.
[ 7.636067] RPC: Registered tcp transport module.
[ 7.636077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.636130] PCI: enabling device 0000:00:01.0 (0140 -> 0142)
[ 7.636581] Unpacking initramfs...
[ 8.412050] Freeing initrd memory: 6208K (c1101000 - c1711000)
[ 8.412216] NetWinder Floating Point Emulator V0.97 (double precision)
[ 8.413014] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 8.413238] audit: initializing netlink subsys (disabled)
[ 8.413320] audit: type=2000 audit(0.930:1): initialized
[ 8.414258] bounce pool size: 64 pages
[ 8.414356] zbud: loaded
[ 8.414615] VFS: Disk quotas dquot_6.5.2
[ 8.414691] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.415107] NFS: Registering the id_resolver key type
[ 8.415206] Key type id_resolver registered
[ 8.415220] Key type id_legacy registered
[ 8.415246] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 8.415259] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.415484] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 8.415881] msgmni has been set to 239
[ 8.416061] Key type big_key registered
[ 8.418788] alg: No test for stdrng (krng)
[ 8.418919] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 8.418935] io scheduler noop registered
[ 8.418946] io scheduler deadline registered
[ 8.418995] io scheduler cfq registered (default)
[ 8.419406] mv_xor mv_xor.0: Marvell shared XOR driver
[ 8.458748] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.498739] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 8.498921] mv_xor mv_xor.1: Marvell shared XOR driver
[ 8.538749] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.578746] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 8.579164] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 8.600046] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[ 9.214149] console [ttyS0] enabled
[ 9.219204] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 9.225532] nand: Hynix H27U1G8F2BTR-BC
[ 9.229382] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 9.235028] Scanning device for bad blocks
[ 9.352123] 5 cmdlinepart partitions found on MTD device orion_nand
[ 9.358366] Creating 5 MTD partitions on "orion_nand":
[ 9.363509] 0x000000000000-0x000000200000 : "u-boot"
[ 9.368895] 0x000000200000-0x000000500000 : "uImage"
[ 9.374203] 0x000000500000-0x000000800000 : "uImage2"
[ 9.379658] 0x000000800000-0x000001000000 : "failsafe"
[ 9.385142] 0x000001000000-0x000008000000 : "root"
[ 9.390919] m25p80 spi0.0: m25p05-nonjedec (64 Kbytes)
[ 9.405702] libphy: Fixed MDIO Bus: probed
[ 9.424386] libphy: orion_mdio_bus: probed
[ 9.428615] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 10.507041] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:05:f4:98
[ 10.516028] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.522554] ehci-pci: EHCI PCI platform driver
[ 10.527063] ehci-orion: EHCI orion driver
[ 10.531185] orion-ehci orion-ehci.0: EHCI Host Controller
[ 10.536599] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 10.544332] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 10.568703] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 10.574850] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.581640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.588854] usb usb1: Product: EHCI Host Controller
[ 10.593716] usb usb1: Manufacturer: Linux 3.14.0-kirkwood-tld-1 ehci_hcd
[ 10.600414] usb usb1: SerialNumber: orion-ehci.0
[ 10.605856] hub 1-0:1.0: USB hub found
[ 10.609675] hub 1-0:1.0: 1 port detected
[ 10.614353] mousedev: PS/2 mouse device common for all mice
[ 10.928733] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 11.080970] usb 1-1: New USB device found, idVendor=154b, idProduct=007a
[ 11.087663] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.094800] usb 1-1: Product: USB 2.0 FD
[ 11.098740] usb 1-1: Manufacturer: PNY Technologies
[ 11.103596] usb 1-1: SerialNumber: AA00000000001424
[ 11.628701] rtc-mv rtc-mv: internal RTC not ticking
[ 11.633720] i2c /dev entries driver
[ 11.638104] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.644098] drop_monitor: Initializing network drop monitor service
[ 11.650658] TCP: cubic registered
[ 11.653964] NET: Registered protocol family 17
[ 11.658537] Key type dns_resolver registered
[ 11.663504] registered taskstats version 1
[ 11.668438] regulator-dummy: incomplete constraints, leaving on
[ 11.674843] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 11.683509] Freeing unused kernel memory: 212K (c064e000 - c0683000)
Loading, please wait...
[ 11.779045] udevd[57]: starting version 175
[ 11.942931] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 11.948181] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 12.067662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.086228] mvsdio mvsdio: no pins associated
[ 12.104337] SCSI subsystem initialized
[ 12.123222] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.155352] usb usb2: Product: xHCI Host Controller
[ 12.168813] mvsdio mvsdio: using GPIO for card detection
[ 12.177980] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 12.195643] sata_mv sata_mv.0: cannot get optional clkdev
[ 12.208807] usb usb2: Manufacturer: Linux 3.14.0-kirkwood-tld-1 xhci_hcd
[ 12.215489] usb usb2: SerialNumber: 0000:00:01.0
[ 12.243510] scsi0 : usb-storage 1-1:1.0
[ 12.248892] sata_mv sata_mv.0: slots 32 ports 1
[ 12.265000] usbcore: registered new interface driver usb-storage
[ 12.287367] hub 2-0:1.0: USB hub found
[ 12.297517] scsi1 : sata_mv
[ 12.307291] ata1: SATA max UDMA/133 irq 21
[ 12.314053] hub 2-0:1.0: 2 ports detected
[ 12.340081] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 12.345313] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 12.396108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 12.423245] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.446250] usb usb3: Product: xHCI Host Controller
[ 12.451290] usb usb3: Manufacturer: Linux 3.14.0-kirkwood-tld-1 xhci_hcd
[ 12.457970] usb usb3: SerialNumber: 0000:00:01.0
[ 12.464080] hub 3-0:1.0: USB hub found
[ 12.467876] hub 3-0:1.0: 2 ports detected
[ 12.678721] ata1: SATA link down (SStatus 0 SControl F300)
[ 13.684757] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
[ 13.733926] sd 0:0:0:0: [sda] 15950592 512-byte logical blocks: (8.16 GB/7.60 GiB)
[ 13.743278] sd 0:0:0:0: [sda] Write Protect is off
[ 13.748613] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.753979] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.765383] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.770747] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.778096] sda: sda1
[ 13.784385] sd 0:0:0:0: [sda] No Caching mode page found
[ 13.789776] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.795852] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 13.816434] sd 0:0:0:0: Attached scsi generic sg0 type 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sdd1 does not exist. Dropping to a shell!
modprobe: module i8042 not found in modules.dep
[ 73.729999] uhci_hcd: USB Universal Host Controller Interface driver
[ 73.749910] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 73.770924] usbcore: registered new interface driver usbhid
[ 73.776486] usbhid: USB HID core driver
BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) k