with stock U-Boot I had some problems getting debian running on this box.
so I tried to cleaning out the U-Boot env but this results in an env overflow
I tested and flashend the newest U-Boot and it's running fine
but I noticed that with stock and this U-Boot the kernel recognizes more bad blocks as it should .. there are only two.
I had this erlier with some other box but I didn't remember how I fixed it.
I also found an older thread with the same issue:
http://forum.doozan.com/read.php?3,6910,7752
its a "MS2000-100PES" and I think that I use the right DTB (kirkwood-netgear_stora_ms2000.dtb)
any hints?
so I tried to cleaning out the U-Boot env but this results in an env overflow
I tested and flashend the newest U-Boot and it's running fine
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:22:13) Netgear-MS2110 SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0
but I noticed that with stock and this U-Boot the kernel recognizes more bad blocks as it should .. there are only two.
I had this erlier with some other box but I didn't remember how I fixed it.
I also found an older thread with the same issue:
http://forum.doozan.com/read.php?3,6910,7752
its a "MS2000-100PES" and I think that I use the right DTB (kirkwood-netgear_stora_ms2000.dtb)
any hints?