Does anyone have a working wireless (preferably with the stock card, but other ideas good too) on the Pogo Pro that they could share? I did the setup from Qui's blog (known as grayman here) and I can access the wireless as long as the wired is connected (2 ip addresses assigne, one for wired and one for wireless). Twinclouds had a similar problem but apparently did not get a solution. This seems to be fairly common on Debian as the issue is all over the RPi forums, again with no definitive solution that I could find.
I'm running Bodhi's 4.1 kernel with the 3.17 file system. I'm thinking the answer is in the configuration of the etc/interfaces file, but can't get a working version. As noted above, when the wired connection is unplugged, the Pogo does not get an ip from the router (set for DHCP). I can post the interfaces file if that would help.
Thanks.
I'm running Bodhi's 4.1 kernel with the 3.17 file system. I'm thinking the answer is in the configuration of the etc/interfaces file, but can't get a working version. As noted above, when the wired connection is unplugged, the Pogo does not get an ip from the router (set for DHCP). I can post the interfaces file if that would help.
Thanks.