iConnect not boots from Stick when DVB-C Stick plugged in (2 replies)

Hello.

I will try to explain my problem with my bad english. Sorry for this.

I have an iomega iConnect debianized with this Tutorial: http://www.congenio.de/infos/iconnect.html

All runs good. I will use my iomega als tvheadend Server. For this I need two DVB-C Sticks from Sundtek. First I tried only the USB-Stick and configured all. After this I plugged in one DVB-Card for testing. Since testing I had the problem that after reboot a while nothing happens and then the original firmware loaded.

Yesterday i made some tests and after i plugged out my DVB-C Card the iomega booted from my USB-Stick.

The USB-Sticks plugged in at Port 1 at the back of the iconnect.

Now I don`t know what todo next. It isn´t a nice solution to unplug the DVB-C Card each reboot. I often works remotly some miles away on the iconnect.

I´m not a specialistin uBoot etc. so I don´t know what to do. Is there anyone out there who can help me or push me in the right direction.

Sorry if there are to less information. If you need one, tell me and i will bring it.

Thanks for reading till here.

Greats
pr0