Pogo V3 (Oxnas OX820) power off (1 reply)

a fiew weeks ago I owned a Pogo v3.
All seems working fine:

- updating U-Boot
- installing Debian 3.17 rootfs
- updating to kernel 4.1
- upgrading to Debian Jessie

The only thing I've recognized:
On Debien Jessie, the LED doesn't go off.
also something in the log shows that the second core doesn't gets off (only on Debian Jessie).


So I decided to test it again (Wheezy vs. Jessie).
Now I'm using an USB Stick with LED to check whe status of it and I'm locking at the LAN LEDs
I also check the power consumption.

let's see:


Debien Wheezy (Kernel 3.17 and 4.1)

- idle / load: 3,3 W / 4,3 W
- LED: on, usb stick LED: on and blinking while read / write, LAN LED (green): on

at power off:
- "power down" on serial console
- LED: off
- usb stick LED: on
- LAN LED (green): on
- 3.5 W power consumption




Debian Jessie (kernel 4.1)

- idle / load: 3,3 W / 4,3 W
- LED on, usb stick LED on and blinking while read / write, LAN LED (green) on

at power off:

- one core doesn't get off
- LED: on
- usb stick LED: on
- LAN LED (green): on
- 3,5 W power consumtion


Any ideas how to fix this?


pengu

-----------------------------------------------
Moderator edit: split to its own topic