Hi,
on my second Dockstar, i put the new Uboot (2015.10) and i would like to put Openwrt; Unfortunately, it starts searching a kernel image on usb device . i would like put OW on nand of dockstar, not on usb.
I suppose due to env variable (bootcmd). And so, i would like change this default variable to realize this installation :
https://wiki.openwrt.org/doc/howto/dockstar_sandbox
Is it possible ? and How ?
Thanks a lot
My environnement :
DockStar> printenv
arcNumber=2097
baudrate=115200
bootcmd=run bootcmd_uenv; run bootcmd_usb; reset
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot;
bootdelay=10
console=ttyS0,115200
device=0:1
ethact=egiga0
ethaddr=00:10:75:1A:6F:BA
filesize=2000000
led_error=orange blinking
led_exit=green off
led_init=green blinking
led_init=green off
mainlineLinux=yes
mtddevname=rootfs
mtddevnum=2
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
partition=nand0,2
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
rescue_installed=1
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=/dev/mtdblock2 ro rootfstype=jffs2 $mtdparts $rescue_custom_params
rootdelay=10
rootfstype=ext2
set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x810000
uenv_load=usb start; setenv uenv_loaded 0; for devtype in usb; do for disknum in 0; do run uenv_read_disk; done; done
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if $devtype part $disknum; then run uenv_read; fi
usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_init=usb start
usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd
usb_root=/dev/sda1
Environment size: 1826/131068 bytes
DockStar> version
U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:56:21 -0800)
Seagate FreeAgent DockStar
gcc (Debian 4.9.2-10) 4.9.2
GNU ld (GNU Binutils for Debian) 2.25
DockStar>
on my second Dockstar, i put the new Uboot (2015.10) and i would like to put Openwrt; Unfortunately, it starts searching a kernel image on usb device . i would like put OW on nand of dockstar, not on usb.
I suppose due to env variable (bootcmd). And so, i would like change this default variable to realize this installation :
https://wiki.openwrt.org/doc/howto/dockstar_sandbox
Is it possible ? and How ?
Thanks a lot
My environnement :
DockStar> printenv
arcNumber=2097
baudrate=115200
bootcmd=run bootcmd_uenv; run bootcmd_usb; reset
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot;
bootdelay=10
console=ttyS0,115200
device=0:1
ethact=egiga0
ethaddr=00:10:75:1A:6F:BA
filesize=2000000
led_error=orange blinking
led_exit=green off
led_init=green blinking
led_init=green off
mainlineLinux=yes
mtddevname=rootfs
mtddevnum=2
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
partition=nand0,2
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
rescue_installed=1
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=/dev/mtdblock2 ro rootfstype=jffs2 $mtdparts $rescue_custom_params
rootdelay=10
rootfstype=ext2
set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x810000
uenv_load=usb start; setenv uenv_loaded 0; for devtype in usb; do for disknum in 0; do run uenv_read_disk; done; done
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if $devtype part $disknum; then run uenv_read; fi
usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_init=usb start
usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage
usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd
usb_root=/dev/sda1
Environment size: 1826/131068 bytes
DockStar> version
U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:56:21 -0800)
Seagate FreeAgent DockStar
gcc (Debian 4.9.2-10) 4.9.2
GNU ld (GNU Binutils for Debian) 2.25
DockStar>