I've isntalled uboot & Debian on 4 of the Pogoplug V4 mobiles. Everthing went without a hitch on the 1st 3, & on the last, I encountered on very small issue.
After booting (from the sd card) sucessfully, the front LED(s) never switch to solid green, the red stays on (giving orange).
Inspection of the /sys/class/leds information shows that the red-led's trigger file is set properly to [none], which I ASSUME means no error indicated. however, the light stays on. echo none > to /sys/class/leds/plug:red:misc does not change the state.
When booting back tot he default pogo-plug os, the light behaves normally (switching to solid green eventually).
Suggestions?
After booting (from the sd card) sucessfully, the front LED(s) never switch to solid green, the red stays on (giving orange).
Inspection of the /sys/class/leds information shows that the red-led's trigger file is set properly to [none], which I ASSUME means no error indicated. however, the light stays on. echo none > to /sys/class/leds/plug:red:misc does not change the state.
When booting back tot he default pogo-plug os, the light behaves normally (switching to solid green eventually).
Suggestions?