Howto reset envs to uboot.2016.05-tld-1.environment while in netconsole (3...
In this instruction, the Pogo E02 is used as example. The current installed u-boot is uboot.2016.05-tld-1 or later. It will work if you have uboot.2016.05-tld-1 or later installed on your box. Earlier...
View ArticleNSA325v2 problem (12 replies)
I have been using old Linux-4.4.0-kirkwood-tld-1 and now I wanted to update it. I updated from 4.4.0 -> 4.10.9 which worked fine. When I updated it to linux-4.11.3-kirkwood-tld-2, It get stuck on:...
View ArticleDesigning a Mother's Day computer? (7 replies)
The thought occurred to me, my mom is entirely computer illiterate, wants the most basic of computer functions like look up recipes and simple searches like "is Crystal Gayle Loretta Lynn's sister or...
View ArticleU-Boot for Buffalo Linkstations (7 replies)
Hello everyone, I am still having some older Buffalo Linkstations lying around that I like to set up similar to my other NSA325. Due to restricted hardware I only like to use those as NFS-servers for...
View ArticleSeagate FireCuda Gaming SSHD 2TB SATA under US $62 (no replies)
I don't know if the following is a great deal or not. Currently, NewEGG has a sale on this Seagate FireCuda Gaming SSHD 2TB SATA 6.0Gb/s 2.5" Notebooks / Laptops Internal Hard Drive ST2000LX001 US...
View ArticleBooting from third partition of disk (5 replies)
I have installed the Debian rootfs on /dev/sda3 and labelled it rootfs, but uboot doesn't want to boot from it. At the boot prompt, I run scan_disk and get the following:- GoFlexHome> run scan_disk...
View ArticleU-Boot for Pogoplug Pogo E01 (003-SP1001) (16 replies)
I want to update the U-Boot. How to do it correctly for my model? Need uboot.2017.07-tld-2.sheevaplug.bodhi.tar ? Thanks. U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC:...
View ArticleSheevaPlug (1 reply)
I just bought a SheevaPlug on Ebay and it comes with Ubuntu installed. Apparently a Debian SD card is available for it according to:-...
View ArticleLinux Kernel 5.1.2 MVEBU - INITRD overlaps in-use memory region (11 replies)
I've compiled the mainline kernel (without patches) and trying to run the generated uImage and the ramdisk of the debian installer. My problem is that if I use the precompiled kernle 5.1.2 the initrd...
View ArticleAny easy way to burn a modern debian system to Dockstar's flash? (2 replies)
I updated uboot of the dockstar to the latest version, is there any easy way to put Debian 4.12.1 to its internal flash (, remove something to make it smaller of course),..., I don't want to use a...
View ArticleNSA320 Bad eraseblock (11 replies)
Hi everyone, first of all thx for all your work, you are doing a great job! I'm trying to install uboot on my zyxel NSA320 device, but during the check for the bad blocks I'm getting this message:...
View ArticleLinux 5.1 SSD Data Loss Bug (2 replies)
Linux 5.1 Hit By A Data Loss Bug Due To Overly Aggressive FSTRIM: https://www.phoronix.com/scan.php?page=news_item&px=Linux-5.1-FSTRIM-Bug QuoteAs a forewarning to those using LVM, dm-crypt, and...
View ArticleTheres some more to be had..... (3 replies)
https://www.ebay.co.uk/itm/332964456269 I can come back to the party after a loooong hiatus - Just bought myself a PogoPlug Pink - N.I.B.
View ArticleDVB support? (1 reply)
Hi everyone (and bodhi in particular), after a few years I am currently trying to see what my old Kirkwood machines can still do and first of all I would like to say thank you very much to bodhi for...
View Articleopenwrt using Bodhi's uboot (2 replies)
Hi, I have dockstar and Goflex home with Bodhi's u-boot. Can I boot openwrt with OS on external usb without writing it on local flash? If yes, how?
View ArticleQuestion about i2c troubleshooting (2 replies)
Howdy, I'm trying to get the rtc working on an armada-370 device but am having trouble getting the i2c bus to work. I can tell from the dmesg output from the stock firmware that the rrtc works and is...
View ArticleNAS326 how to boot with UART? (3 replies)
Hello, I'm new to the forum. I have a Zyxel NAS326 with a physically damaged NAND memory - it does not save the configuration. I want to buy a new memory, unfortunately I do not have a programmer to...
View ArticleKernel 5.1.0 on ix-dl no sensors, Need recompile ? (4 replies)
I Used Kernel 5.1.0 on my ix-dl, Here no sensors: Kernel 4.20.6: <root@IX2-DL>~/:uname -a Linux IX2-DL 4.20.6-kirkwood-tld-1 #1 PREEMPT Thu Jan 31 21:41:45 PST 2019 armv5tel GNU/Linux...
View ArticleSeagate BarraCuda ST2000DM008 2TB 7200 RPM Under US $50 (no replies)
Currently, NewEgg has this Seagate BarraCuda ST2000DM008 2TB 7200 RPM 256MB Cache SATA 6.0Gb/s 3.5" Hard Drive Bare Drive US $49.99 + Free S/H. This will be a perfect HDD for a Seagate GoFLEX Home. If...
View ArticleBootable USB Creator on Linux (1 reply)
I am new to Linux and be afraid of commands. Is there any built-in app in Debain to make a bootable USB?
View Article