Caution using Kingo ROOT on Android (no replies)
My own mileage varies here - it seemed to root/unroot my Android KitKat fine and all appears well. However when I tried it on Android Lollipop it un-rooted right away, something me and others first...
View ArticleECS E1-2100 AMD Dual Core Mini ITX Mobo/CPU Combo (KBN-I/2100) for US $20...
I have no interest in this, but rather just wanted to pass along for anyone who is interested in building an AMD 2-core computer with a Mini iTX mobo. Currently, NewEgg has this ECS E1-2100 AMD Dual...
View ArticleThose USB 2.0 hubs with switches work with OS sticks (no replies)
Despite my recent bad luck with similar USB 3.0 variants, I scored a 4-port, same as this for the same price. What surprised me on the ThinClient, was plugging in a Mint 17.3 and Windows 7 USB sticks...
View Articlepogo v3 (oxnas) enable ssh (11 replies)
hi, anyone has hints to enable ssh? i found a new pogoplug pro and tried to enable ssh. there are just open ports at 80 3333 and 3334. i tried to register with my.pogoplug.com and the device is found....
View ArticleDockstar: Power via USB? (1 reply)
Hello, someone posted the trick, that it should be possible to power up the Seagate Dockstar via 5V USB instead of 12V. I couldn't find it again, but I knew it is somewhere on the www. So I gave it a...
View ArticleHow to tell if Android's audio goes 24-bit 96/192KHz? (no replies)
CD-quality (16-bit 44.1 KHz) audio is one of the greatest magic tricks of the 20th century. How lush analog sound was whittled down to that spec, and some say for years it was a scalable 12-bit even....
View ArticleNFS performance (3 replies)
I would like to know what software do you use to test your NFS performance on your client (Linux) computer when mounting your NFS drive from your PogoPlug Pro. Also, what are the maximum R/W...
View Articleedit mtd from debian pogoplug pro oxnas (no replies)
hi, is there a list of packages/instructions to mount the original pogoplug pro flash from debian? jay
View ArticleAre Samsung SDHC cards decent? (1 reply)
Best Buy has a Samsung EVO+ 32GB MicroSDHC card that reads @ 80MB/s and writes @ 20MB/s for around $10. I was thinking of using that in the tablet for general use and recovery options. Though it...
View ArticleCheap POGO devices - Ebay (2 replies)
Probably best if your are in the U.S of A. 1 @ $4 - mobile (blue)...
View ArticlePogoPlug Pro 02 original firmware vs. NFS (no replies)
After playing around my PogoPlug Pro 02 with some 3-rd party firmwares, I must say I am a bit disappointed with its SATA performance and thought perhaps it will do better when running on its own stock...
View ArticleRestore original u-boot on Pogoplug-E02 that has Doozan chained mtd3 u-boot...
Hi folks I have a Pogoplug-E03 here that I used to run Debian on from a USB HDD. At the time I followed Jeff's guide to install a chainloaded newer U-boot on mtd3. The Pogoplug has been sitting unused...
View ArticleEnabling ECC ram: possible? (1 reply)
I was wondering about the possibility to enable ECC for the RAM. The SoC supports it, and afaik the only difference in PC DIMMs is that they add a chip to compensate for the RAM space used by...
View Articlebad block on mtd (1 reply)
hi bhodi, in your install instructions you write: >4. Be sure there is no bad block in the first 2M of your NAND (check dmesg for bad block 0 to 16). This is very important, if >there is bad...
View ArticleGoFlex Net problem with Ext4 on USB (4 replies)
hi, i have a problem at a goflexnet: [ 1256.923314] usb 1-1: reset high-speed USB device number 2 using orion-ehci [ 1257.094226] sd 1:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK...
View ArticleHitachi Ultrastar HUA723020ALA641 2TB (Manufacturer refurbished) (1 reply)
Currently, ebay has this Hitachi Ultrastar 7K3000 HUA723020ALA641 2TB 64MB cache Internal Hard Drive (Manufacturer refurbished) under US$ 35 + a FREE S/H. I really am in a need for a SATA HDD to put...
View Articleno .dtb file (4 replies)
Hello Bodhi, Is it possible to boot using ONLY uImage kernel file without its .dtb file? If so, can you help me to modify the following uEnv.txt file so that it won't need the...
View Article[Kernel 4.6] afatech based DVB-T usb sticks doesn't work anymore but not all...
- Hauppauge WinTV MiniStick 2 (NSA325, iConnect, x86_64) (prod: f900 ven: 2040) - MSI Digi Vox Mini II (black / white) (NSA325, iConnect) (prod: 9016 ven: 15a4) as mentioned in the linux kernel...
View ArticleCan I skip from 3.16, wheezy straight to Linux Kernel 4.6 Kirkwood (3 replies)
I have just now had to extract Wheezy to a new and bigger USB stick, booted, ssh, etc and all is good. I'd like to move to Linux Kernel 4.6 Kirkwood and was wondering whether I could skip the earlier...
View ArticlePogoPlug Pro internal Power source for SATA port (1 reply)
I stumbled onto this SATA power from in side the PogoPlug Pro post. I am not that savvy on this but wonder if anyone out here had ever tried it.
View Article
