Use NSA325 as tvheadend backend with USB dvs-s2 receiver (1 reply)

Dear all,

my intention is to use the NSA325 as tvheadend backend with an USB attached dvb-s2 receiver.

Compiling tvheadend was straight forward, but it seems that there are no dvb-s/s2 modules available, so my Technotrend S2-4600 is not loaded nor found by tvheadend. Therefore I have to compile the v4l drivers and modules by my own.

What I did:

dpkg -i linux-headers-3.12.0-kirkwood-tld-5_5.0_armel.deb
hg clone --insecure https://bitbucket.org/liplianin/s2-liplianin-v39
cd /lib/modules/3.12.0-kirkwood-tld-5/build/
ln -s /usr/src/linux-headers-3.12.0-kirkwood-tld-5 build
apt-get install libproc-processtable-perl
in s2-liplianin-v39 I run make with success

and now I got this:

make -C /usr/src/s2-liplianin-v39/v4l
make[1]: Entering directory `/usr/src/s2-liplianin-v39/v4l'
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/usr/src/s2-liplianin-v39/v4l/firmware'
make[2]: Leaving directory `/usr/src/s2-liplianin-v39/v4l/firmware'
make -C firmware
make[2]: Entering directory `/usr/src/s2-liplianin-v39/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/usr/src/s2-liplianin-v39/v4l/firmware'
Kernel build directory is /lib/modules/3.12.0-kirkwood-tld-5/build
make -C ../linux apply_patches
make[2]: Entering directory `/usr/src/s2-liplianin-v39/linux'
Patches for 3.12.0-kirkwood-tld-5 already applied.
make[2]: Leaving directory `/usr/src/s2-liplianin-v39/linux'
make -C /lib/modules/3.12.0-kirkwood-tld-5/build SUBDIRS=/usr/src/s2-liplianin-v39/v4l modules
make[2]: Entering directory `/usr/src/linux-headers-3.12.0-kirkwood-tld-5'
Building modules, stage 2.
MODPOST 0 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.12.0-kirkwood-tld-5'
./scripts/rmmod.pl check
found 0 modules
make[1]: Leaving directory `/usr/src/s2-liplianin-v39/v4l'

Maybe someone can help.

Best regards,
Rick