Dear Community, thank you very much for your invested time in trying to help us get the most out of our hardware.
I would need your help in installing Debian on an Arm Cortex A9 with touch screen monitor (monitor is from Sigmatek company).
Till now, I have the following information (see also attached pictures):
- it seems to have a Linux installed on it, it runs from a micro-sd card with 3 partitions, bootldr containing uImage and uRamdisk files, a C partition containing (I think) the program from the manufacturer and a system which should be the Linux.
- it is booting from the card, but I think that the Linux is limited in some ways because I can't use all the commands like in a standard Linux.
I'm attaching some pictures, and I've found a some kind of boot-log also.
I would need your help in installing Debian on an Arm Cortex A9 with touch screen monitor (monitor is from Sigmatek company).
Till now, I have the following information (see also attached pictures):
- it seems to have a Linux installed on it, it runs from a micro-sd card with 3 partitions, bootldr containing uImage and uRamdisk files, a C partition containing (I think) the program from the manufacturer and a system which should be the Linux.
- it is booting from the card, but I think that the Linux is limited in some ways because I can't use all the commands like in a standard Linux.
I'm attaching some pictures, and I've found a some kind of boot-log also.
Jan 1 00:00:30 sigmatek-arm syslog.info syslogd started: BusyBox v1.22.1 - Sigmatek Jan 1 00:00:30 sigmatek-arm user.notice kernel: klogd started: BusyBox v1.22.1 (2022-09-29 18:44:34 CEST) Jan 1 00:00:30 sigmatek-arm user.info kernel: Booting Linux on physical CPU 0x0 Jan 1 00:00:30 sigmatek-arm user.notice kernel: Linux version 3.10.53 (jenkins@7dec7c8bbf98) (gcc version 4.8.2 (GCC) ) #2 SMP PREEMPT Tue Nov 15 14:00:38 CET 2022 Jan 1 00:00:30 sigmatek-arm user.warn kernel: CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d Jan 1 00:00:30 sigmatek-arm user.warn kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Jan 1 00:00:30 sigmatek-arm user.info kernel: Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Sigmatek TT1933-S Board Jan 1 00:00:30 sigmatek-arm user.info kernel: cma: CMA: reserved 32 MiB at 2e000000 Jan 1 00:00:30 sigmatek-arm user.warn kernel: Memory policy: ECC disabled, Data cache writealloc Jan 1 00:00:30 sigmatek-arm user.debug kernel: On node 0 totalpages: 131072 Jan 1 00:00:30 sigmatek-arm user.debug kernel: free_area_init_node: node 0, pgdat c085ff80, node_mem_map c0948000 Jan 1 00:00:30 sigmatek-arm user.debug kernel: DMA zone: 1024 pages used for memmap Jan 1 00:00:30 sigmatek-arm user.debug kernel: DMA zone: 0 pages reserved Jan 1 00:00:30 sigmatek-arm user.debug kernel: DMA zone: 131072 pages, LIFO batch:31 Jan 1 00:00:30 sigmatek-arm user.info kernel: PERCPU: Embedded 10 pages/cpu @c0d60000 s18944 r8192 d13824 u40960 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pcpu-alloc: s18944 r8192 d13824 u40960 alloc=10*4096 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pcpu-alloc: [0] 0 [0] 1 Jan 1 00:00:30 sigmatek-arm user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Jan 1 00:00:30 sigmatek-arm user.notice kernel: Kernel command line: console=ttymxc1,115200 isolcpus=0 irqaffinity=1 threadirqs video=mxcfb0sigvid=1366x768 sigvid=1366x768 CPUname=`TT 1933-S` FirstUsbDrive=E root=/dev/mmcblk0p2 rw rootfstype=ext3 rootflags=data=journal rootw Jan 1 00:00:30 sigmatek-arm user.info kernel: PID hash table entries: 2048 (order: 1, 8192 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: Memory: 512MB = 512MB total Jan 1 00:00:30 sigmatek-arm user.notice kernel: Memory: 477204k/477204k available, 47084k reserved, 0K highmem Jan 1 00:00:30 sigmatek-arm user.notice kernel: Virtual kernel memory layout: Jan 1 00:00:30 sigmatek-arm user.notice kernel: vector : 0xffff0000 - 0xffff1000 ( 4 kB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: .text : 0xc0008000 - 0xc07ccac8 (7955 kB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: .init : 0xc07cd000 - 0xc0813a00 ( 283 kB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: .data : 0xc0814000 - 0xc0861500 ( 310 kB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: .bss : 0xc0861500 - 0xc09474f0 ( 920 kB) Jan 1 00:00:30 sigmatek-arm user.info kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Jan 1 00:00:30 sigmatek-arm user.info kernel: Preemptible hierarchical RCU implementation. Jan 1 00:00:30 sigmatek-arm user.info kernel: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Jan 1 00:00:30 sigmatek-arm user.info kernel: NR_IRQS:16 nr_irqs:16 16 Jan 1 00:00:30 sigmatek-arm user.info kernel: L310 cache controller enabled Jan 1 00:00:30 sigmatek-arm user.info kernel: l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02c50000, Cache size: 524288 B Jan 1 00:00:30 sigmatek-arm user.info kernel: sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms Jan 1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz clocksource Jan 1 00:00:30 sigmatek-arm user.info kernel: CPU identified as i.MX6DL, silicon rev 1.4 Jan 1 00:00:30 sigmatek-arm user.info kernel: Interrupt pipeline (release #7) Jan 1 00:00:30 sigmatek-arm user.info kernel: Console: colour dummy device 80x30 Jan 1 00:00:30 sigmatek-arm user.info kernel: Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280) Jan 1 00:00:30 sigmatek-arm user.info kernel: pid_max: default: 32768 minimum: 301 Jan 1 00:00:30 sigmatek-arm user.info kernel: Mount-cache hash table entries: 512 Jan 1 00:00:30 sigmatek-arm user.info kernel: CPU: Testing write buffer coherency: ok Jan 1 00:00:30 sigmatek-arm user.info kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Jan 1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz timer Jan 1 00:00:30 sigmatek-arm user.info kernel: Setting up static identity map for 0xc059c650 - 0xc059c6a8 Jan 1 00:00:30 sigmatek-arm user.warn kernel: CPU1: Booted secondary processor Jan 1 00:00:30 sigmatek-arm user.info kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Jan 1 00:00:30 sigmatek-arm user.info kernel: I-pipe, 396.000 MHz timer Jan 1 00:00:30 sigmatek-arm user.info kernel: Brought up 2 CPUs Jan 1 00:00:30 sigmatek-arm user.info kernel: SMP: Total of 2 processors activated (3162.11 BogoMIPS). Jan 1 00:00:30 sigmatek-arm user.info kernel: CPU: All CPU(s) started in SVC mode. Jan 1 00:00:30 sigmatek-arm user.info kernel: devtmpfs: initialized Jan 1 00:00:30 sigmatek-arm user.info kernel: pinctrl core: initialized pinctrl subsystem Jan 1 00:00:30 sigmatek-arm user.info kernel: regulator-dummy: no parameters Jan 1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 16 Jan 1 00:00:30 sigmatek-arm user.info kernel: DMA: preallocated 256 KiB pool for atomic coherent allocations Jan 1 00:00:30 sigmatek-arm user.info kernel: Use WDOG1 as reset source Jan 1 00:00:30 sigmatek-arm user.info kernel: syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered Jan 1 00:00:30 sigmatek-arm user.info kernel: vdd1p1: 800 <--> 1375 mV at 1125 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: vdd3p0: 2800 <--> 3150 mV at 3000 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: vdd2p5: 2000 <--> 2750 mV at 2425 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: cpu: 725 <--> 1450 mV at 1150 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: vddpu: 725 <--> 1450 mV at 1150 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: vddsoc: 725 <--> 1450 mV at 1175 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered Jan 1 00:00:30 sigmatek-arm user.info kernel: syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered Jan 1 00:00:30 sigmatek-arm user.info kernel: hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. Jan 1 00:00:30 sigmatek-arm user.info kernel: hw-breakpoint: maximum watchpoint size is 4 bytes. Jan 1 00:00:30 sigmatek-arm user.info kernel: imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver Jan 1 00:00:30 sigmatek-arm user.info kernel: bio: create slab <bio-0> at 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: mxs-dma 110000.dma-apbh: initialized Jan 1 00:00:30 sigmatek-arm user.info kernel: 2P8V: 2800 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: 1P5V: 1500 mV Jan 1 00:00:30 sigmatek-arm user.info kernel: usb_otg_vbus: 5000 mV Jan 1 00:00:30 sigmatek-arm user.warn kernel: i2c-core: driver [max17135] using legacy suspend method Jan 1 00:00:30 sigmatek-arm user.warn kernel: i2c-core: driver [max17135] using legacy resume method Jan 1 00:00:30 sigmatek-arm user.notice kernel: SCSI subsystem initialized Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbfs Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver hub Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new device driver usb Jan 1 00:00:30 sigmatek-arm user.info kernel: i2c i2c-0: IMX I2C adapter registered Jan 1 00:00:30 sigmatek-arm user.info kernel: Linux video capture interface: v2.00 Jan 1 00:00:30 sigmatek-arm user.info kernel: pps_core: LinuxPPS API ver. 1 registered Jan 1 00:00:30 sigmatek-arm user.info kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Jan 1 00:00:30 sigmatek-arm user.info kernel: PTP clock support registered Jan 1 00:00:30 sigmatek-arm user.info kernel: imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) Jan 1 00:00:30 sigmatek-arm user.err kernel: mxc_ipu mxc_ipu: IPU memblock not available Jan 1 00:00:30 sigmatek-arm user.err kernel: mxc_ipu mxc_ipu: IPU memblock not coherent Jan 1 00:00:30 sigmatek-arm user.info kernel: MIPI CSI2 driver module loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: Advanced Linux Sound Architecture Driver Initialized. Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: Calling CRDA to update world regulatory domain Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: World regulatory domain updated: Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) Jan 1 00:00:30 sigmatek-arm user.info kernel: pureg-dummy: no parameters Jan 1 00:00:30 sigmatek-arm user.info kernel: Switching to clocksource ipipe_tsc Jan 1 00:00:30 sigmatek-arm user.notice kernel: FS-Cache: Loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 Jan 1 00:00:30 sigmatek-arm user.info kernel: pci_bus 0000:00: root bus resource [io 0x1000-0x10000] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: reg 10: [mem 0x00000000-0x000fffff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: reg 38: [mem 0x00000000-0x0000ffff pref] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: supports D1 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold Jan 1 00:00:30 sigmatek-arm user.info kernel: PCI: bus0: Fast back to back transfers disabled Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0]) Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: [8086:1533] type 00 class 0x020000 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 10: [mem 0x00000000-0x000fffff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 18: [io 0x0000-0x001f] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 1c: [mem 0x00000000-0x00003fff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000fffff pref] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Jan 1 00:00:30 sigmatek-arm user.info kernel: PCI: bus1: Fast back to back transfers disabled Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: busn_res: can not insert [bus 01] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0]) Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x012fffff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0x01300000-0x013fffff pref] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 6: assigned [mem 0x01400000-0x0140ffff pref] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x011fffff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x01300000-0x013fffff pref] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 3: assigned [mem 0x01200000-0x01203fff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: PCI bridge to [bus 01] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: bridge window [mem 0x01100000-0x012fffff] Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:00:00.0: bridge window [mem 0x01300000-0x013fffff pref] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:00: resource 4 [io 0x1000-0x10000] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 1 [mem 0x01100000-0x012fffff] Jan 1 00:00:30 sigmatek-arm user.debug kernel: pci_bus 0000:01: resource 2 [mem 0x01300000-0x013fffff pref] Jan 1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 2 Jan 1 00:00:30 sigmatek-arm user.info kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: TCP: Hash tables configured (established 4096 bind 4096) Jan 1 00:00:30 sigmatek-arm user.info kernel: TCP: reno registered Jan 1 00:00:30 sigmatek-arm user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 1 Jan 1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered named UNIX socket transport module. Jan 1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered udp transport module. Jan 1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered tcp transport module. Jan 1 00:00:30 sigmatek-arm user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. Jan 1 00:00:30 sigmatek-arm user.debug kernel: PCI: CLS 64 bytes, default 64 Jan 1 00:00:30 sigmatek-arm user.info kernel: hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available Jan 1 00:00:30 sigmatek-arm user.info kernel: Bus freq driver module loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: futex hash table entries: 512 (order: 3, 32768 bytes) Jan 1 00:00:30 sigmatek-arm user.info kernel: I-pipe: head domain Xenomai registered. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: hal/arm started. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: scheduling class idle registered. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: scheduling class rt registered. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: real-time nucleus v2.6.4 (Jumpin' Out) loaded. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: starting native API services. Jan 1 00:00:30 sigmatek-arm user.info kernel: Xenomai: starting RTDM services. Jan 1 00:00:30 sigmatek-arm user.info kernel: msgmni has been set to 996 Jan 1 00:00:30 sigmatek-arm user.info kernel: io scheduler noop registered Jan 1 00:00:30 sigmatek-arm user.info kernel: io scheduler deadline registered Jan 1 00:00:30 sigmatek-arm user.info kernel: io scheduler cfq registered (default) Jan 1 00:00:30 sigmatek-arm user.info kernel: imx-weim 21b8000.weim: Driver registered. Jan 1 00:00:30 sigmatek-arm user.info kernel: pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt Jan 1 00:00:30 sigmatek-arm user.info kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt Jan 1 00:00:30 sigmatek-arm user.debug kernel: pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: mxc_sdc_fb fb.22: register mxc display driver ldb Jan 1 00:00:30 sigmatek-arm user.info kernel: mxc_sdc_fb fb.22: registered mxc display driver ldb Jan 1 00:00:30 sigmatek-arm user.info kernel: imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) Jan 1 00:00:30 sigmatek-arm user.info kernel: Console: switching to colour frame buffer device 171x48 Jan 1 00:00:30 sigmatek-arm user.warn kernel: imx-sdma 20ec000.sdma: no iram assigned, using external mem Jan 1 00:00:30 sigmatek-arm user.info kernel: imx-sdma 20ec000.sdma: loaded firmware 1.1 Jan 1 00:00:30 sigmatek-arm user.info kernel: imx-sdma 20ec000.sdma: initialized Jan 1 00:00:30 sigmatek-arm user.info kernel: Serial: IMX driver Jan 1 00:00:30 sigmatek-arm user.info kernel: 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX Jan 1 00:00:30 sigmatek-arm user.info kernel: console [ttymxc1] enabled Jan 1 00:00:30 sigmatek-arm user.info kernel: serial: Freescale lpuart driver Jan 1 00:00:30 sigmatek-arm user.info kernel: [drm] Initialized drm 1.1.0 20060810 Jan 1 00:00:30 sigmatek-arm user.info kernel: [drm] Initialized vivante 1.0.0 20120216 on minor 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: brd: module loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: loop: module loaded Jan 1 00:00:30 sigmatek-arm user.info kernel: at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write Jan 1 00:00:30 sigmatek-arm user.info kernel: libphy: Fixed MDIO Bus: probed Jan 1 00:00:30 sigmatek-arm user.info kernel: tun: Universal TUN/TAP device driver, 1.6 Jan 1 00:00:30 sigmatek-arm user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Jan 1 00:00:30 sigmatek-arm user.info kernel: libphy: fec_enet_mii_bus: probed Jan 1 00:00:30 sigmatek-arm user.info kernel: fec 2188000.ethernet eth0: registered PHC device 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k Jan 1 00:00:30 sigmatek-arm user.info kernel: igb: Copyright (c) 2007-2013 Intel Corporation. Jan 1 00:00:30 sigmatek-arm user.warn kernel: PCI: enabling device 0000:01:00.0 (0140 -> 0142) Jan 1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: added PHC on eth1 Jan 1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection Jan 1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:50:f4:35:56:69 Jan 1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: eth1: PBA No: 000300-000 Jan 1 00:00:30 sigmatek-arm user.info kernel: igb 0000:01:00.0: Using legacy interrupts. 1 rx queue(s), 1 tx queue(s) Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rtl8192cu Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rt2800usb Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver rtl8150 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver r8152 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver asix Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver ax88179_178a Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_ether Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_eem Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver smsc75xx Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver smsc95xx Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver gl620a Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver net1080 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver plusb Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_subset Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver zaurus Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver MOSCHIP usb-ethernet driver Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cx82310_eth Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cdc_ncm Jan 1 00:00:30 sigmatek-arm user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jan 1 00:00:30 sigmatek-arm user.info kernel: ehci-pci: EHCI PCI platform driver Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usb-storage Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbserial Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbserial_generic Jan 1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for generic Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver cp210x Jan 1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for cp210x Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver ftdi_sio Jan 1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver pl2303 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbserial: USB Serial support registered for pl2303 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek_usb_fx Jan 1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: doesn't support gadget Jan 1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: EHCI Host Controller Jan 1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 Jan 1 00:00:30 sigmatek-arm user.info kernel: ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 Jan 1 00:00:30 sigmatek-arm user.info kernel: hub 1-0:1.0: USB hub found Jan 1 00:00:30 sigmatek-arm user.info kernel: hub 1-0:1.0: 1 port detected Jan 1 00:00:30 sigmatek-arm user.info kernel: i2c /dev entries driver Jan 1 00:00:30 sigmatek-arm user.info kernel: imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) Jan 1 00:00:30 sigmatek-arm user.info kernel: sdhci: Secure Digital Host Controller Interface driver Jan 1 00:00:30 sigmatek-arm user.info kernel: sdhci: Copyright(c) Pierre Ossman Jan 1 00:00:30 sigmatek-arm user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper Jan 1 00:00:30 sigmatek-arm user.warn kernel: sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode Jan 1 00:00:30 sigmatek-arm user.info kernel: mmc0: no vqmmc regulator found Jan 1 00:00:30 sigmatek-arm user.info kernel: mmc0: no vmmc regulator found Jan 1 00:00:30 sigmatek-arm user.info kernel: mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA Jan 1 00:00:30 sigmatek-arm user.info kernel: mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed Jan 1 00:00:30 sigmatek-arm user.info kernel: cma: CMA: reserved 32 MiB at 2a000000 Jan 1 00:00:30 sigmatek-arm user.info kernel: mxc_vpu 2040000.vpu: VPU initialized Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek_usb_led_tsw Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver r8188eu Jan 1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek KUtils Init Jan 1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek Utils Printk-Task running Jan 1 00:00:30 sigmatek-arm user.warn kernel: RT-Socket-CAN 0.90.2 - (C) 2006 RT-Socket-CAN Development Team Jan 1 00:00:30 sigmatek-arm user.info kernel: nf_conntrack version 0.5.0 (7968 buckets, 31872 max) Jan 1 00:00:30 sigmatek-arm user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 1 00:00:30 sigmatek-arm user.info kernel: ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully Jan 1 00:00:30 sigmatek-arm user.info kernel: arp_tables: (C) 2002 David S. Miller Jan 1 00:00:30 sigmatek-arm user.info kernel: TCP: cubic registered Jan 1 00:00:30 sigmatek-arm user.info kernel: NET: Registered protocol family 17 Jan 1 00:00:30 sigmatek-arm user.notice kernel: Bridge firewalling registered Jan 1 00:00:30 sigmatek-arm user.info kernel: lib80211: common routines for IEEE802.11 drivers Jan 1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'NULL' Jan 1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'WEP' Jan 1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'CCMP' Jan 1 00:00:30 sigmatek-arm user.debug kernel: lib80211_crypt: registered algorithm 'TKIP' Jan 1 00:00:30 sigmatek-arm user.notice kernel: Key type dns_resolver registered Jan 1 00:00:30 sigmatek-arm user.info kernel: VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 Jan 1 00:00:30 sigmatek-arm user.info kernel: usb_otg_vbus: disabling Jan 1 00:00:30 sigmatek-arm user.info kernel: vddpu: disabling Jan 1 00:00:30 sigmatek-arm user.info kernel: regulator-dummy: disabling Jan 1 00:00:30 sigmatek-arm user.info kernel: g_serial gadget: Sigmatek PLC Jan 1 00:00:30 sigmatek-arm user.info kernel: g_serial gadget: g_serial ready Jan 1 00:00:30 sigmatek-arm user.err kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Jan 1 00:00:30 sigmatek-arm user.warn kernel: mmc0: host does not support reading read-only switch. assuming write-enable. Jan 1 00:00:30 sigmatek-arm user.info kernel: ALSA device list: Jan 1 00:00:30 sigmatek-arm user.info kernel: No soundcards found. Jan 1 00:00:30 sigmatek-arm user.info kernel: Waiting for root device /dev/mmcblk0p2... Jan 1 00:00:30 sigmatek-arm user.info kernel: mmc0: new SD card at address 9b7b Jan 1 00:00:30 sigmatek-arm user.info kernel: mmcblk0: mmc0:9b7b SU02G 1.84 GiB Jan 1 00:00:30 sigmatek-arm user.info kernel: mmcblk0: p1 p2 p3 p4 Jan 1 00:00:30 sigmatek-arm user.info kernel: usb 1-1: new high-speed USB device number 2 using ci_hdrc Jan 1 00:00:30 sigmatek-arm user.info kernel: hub 1-1:1.0: USB hub found Jan 1 00:00:30 sigmatek-arm user.info kernel: hub 1-1:1.0: 7 ports detected Jan 1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.3: new full-speed USB device number 3 using ci_hdrc Jan 1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.5: new high-speed USB device number 4 using ci_hdrc Jan 1 00:00:30 sigmatek-arm user.info kernel: usb-storage 1-1.5:1.0: USB Mass Storage device detected Jan 1 00:00:30 sigmatek-arm user.info kernel: scsi0 : usb-storage 1-1.5:1.0 Jan 1 00:00:30 sigmatek-arm user.info kernel: usb 1-1.6: new low-speed USB device number 5 using ci_hdrc Jan 1 00:00:30 sigmatek-arm user.info kernel: kjournald starting. Commit interval 5 seconds Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): using internal journal Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): recovery complete Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): mounted filesystem with journal data mode Jan 1 00:00:30 sigmatek-arm user.info kernel: VFS: Mounted root (ext3 filesystem) on device 179:2. Jan 1 00:00:30 sigmatek-arm user.info kernel: devtmpfs: mounted Jan 1 00:00:30 sigmatek-arm user.notice kernel: scsi 0:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 4 Jan 1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) Jan 1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off Jan 1 00:00:30 sigmatek-arm user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through Jan 1 00:00:30 sigmatek-arm user.info kernel: sda: sda1 Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] No Caching mode page found Jan 1 00:00:30 sigmatek-arm user.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through Jan 1 00:00:30 sigmatek-arm user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk Jan 1 00:00:30 sigmatek-arm user.info kernel: Freeing unused kernel memory: 280K (c07cd000 - c0813000) Jan 1 00:00:30 sigmatek-arm user.err kernel: mmc0: Timeout waiting for hardware interrupt. Jan 1 00:00:30 sigmatek-arm user.err kernel: mmcblk0: error -110 transferring data, sector 3862264, nr 8, cmd response 0x900, card status 0x80000b00 Jan 1 00:00:30 sigmatek-arm user.warn kernel: mmcblk0: retrying using single block read Jan 1 00:00:30 sigmatek-arm user.info kernel: kjournald starting. Commit interval 5 seconds Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): using internal journal Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): recovery complete Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): mounted filesystem with ordered data mode Jan 1 00:00:30 sigmatek-arm user.info kernel: kjournald starting. Commit interval 5 seconds Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): using internal journal Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): recovery complete Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): mounted filesystem with journal data mode Jan 1 00:00:30 sigmatek-arm user.err kernel: UBIFS error (pid 135): ubifs_mount: cannot open "ubi0:C", error -19 Jan 1 00:00:30 sigmatek-arm user.err kernel: UBIFS error (pid 135): ubifs_mount: cannot open "ubi0:bootldr", error -19 Jan 1 00:00:30 sigmatek-arm daemon.info kernel: udevd[152]: starting version 182 Jan 1 00:00:30 sigmatek-arm user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina Jan 1 00:00:30 sigmatek-arm user.warn kernel: Sigmatek Touch: found eGalax Jan 1 00:00:30 sigmatek-arm user.info kernel: input: Sigmatek USB Touchscreen USB:0eef:c000 as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input0 Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver usbhid Jan 1 00:00:30 sigmatek-arm user.info kernel: usbhid: USB HID core driver Jan 1 00:00:30 sigmatek-arm user.info kernel: usbcore: registered new interface driver sigmatek-touch Jan 1 00:00:30 sigmatek-arm user.info kernel: input: Logitech USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.6/1-1.6:1.0/input/input1 Jan 1 00:00:30 sigmatek-arm user.info kernel: hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-ci_hdrc.1-1.6/input0 Jan 1 00:00:30 sigmatek-arm user.info kernel: input: Logitech USB Keyboard as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.6/1-1.6:1.1/input/input2 Jan 1 00:00:30 sigmatek-arm user.info kernel: hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-ci_hdrc.1-1.6/input1 Jan 1 00:00:30 sigmatek-arm user.warn kernel: FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Jan 1 00:00:30 sigmatek-arm user.warn kernel: checked rootfs, /dev/mmcblk0p2 - exit-code 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p2): using internal journal Jan 1 00:00:30 sigmatek-arm user.warn kernel: checked fs /mnt/drive-C, /dev/mmcblk0p4 - exit-code 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: kjournald starting. Commit interval 5 seconds Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): using internal journal Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p4): mounted filesystem with ordered data mode Jan 1 00:00:30 sigmatek-arm user.warn kernel: checked fs /boot, /dev/mmcblk0p1 - exit-code 0 Jan 1 00:00:30 sigmatek-arm user.info kernel: kjournald starting. Commit interval 5 seconds Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): using internal journal Jan 1 00:00:30 sigmatek-arm user.info kernel: EXT3-fs (mmcblk0p1): mounted filesystem with journal data mode Jan 1 00:00:30 sigmatek-arm user.info kernel: fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1) Jan 1 00:00:34 sigmatek-arm user.notice kernel: L-insmod (481): Sigmatek LRT Driver: Lasal Runtime Support loaded (09.04.041_RC1-0-g6b8b63f) Jan 1 00:00:35 sigmatek-arm user.info kernel: sigmatek_powerfail sigmatek_powerfail.23: found IRQ:168 Jan 1 00:00:35 sigmatek-arm user.info kernel: sigmatek_powerfail: Driver loaded Jan 1 00:00:35 sigmatek-arm user.info kernel: Sigmatek PCIE: Driver loaded Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: found sigmatek_sram device Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: found SRAM MEM 0 resource 0x0e000000-0x0e07ffff Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: sigmatek_sram Driver loaded Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: mma8453q Driver loaded Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK-ARM: sigmatek_inoutput Driver loaded Jan 1 00:00:35 sigmatek-arm user.info kernel: SIGMATEK: found CPU-Core Temperature Sensor (imx_thermal_zone) Jan 1 00:00:35 sigmatek-arm user.info kernel: Sigmatek PLC-IMX: loaded (09.04.041_RC1-0-g6b8b63f) Jan 1 00:00:35 sigmatek-arm user.info LRT-Config: (00:00:35.503795:477) RTC not available Jan 1 00:00:35 sigmatek-arm user.warn kernel: LE-System (485): /proc/485/oom_adj is deprecated, please use /proc/485/oom_score_adj instead. Jan 1 00:00:37 sigmatek-arm user.info LRT-Config: (00:00:37.857640:477) Display width:1368, height:768, bpp:16 Jan 1 00:00:38 sigmatek-arm user.notice LRT-Mgr: (00:00:38.590304:493) starting up version Linux-arm S3 Ver: 09.04.041 , Build:633 V of LRT-Manager Jan 1 00:00:39 sigmatek-arm user.info LRT: (00:00:39.902541:495) multicore for rt/cy disabled Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411252:495) Starting up LRT (Lasal RunTime environment) Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411261:495) LRT version : Linux-arm S3 Ver: 09.04.041 , Build:633 V Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411269:495) LRT GIT version : HEAD-6b8b63f Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.411274:495) LRT built with : sdk from jenkins Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419771:495) PLATFORM version : 202211151359 Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419789:495) XENOMAI version : 2.6.4 Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419794:495) SDK version : n.a. Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419799:495) CPU name : 'TT 1933-S' Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419804:495) ALIAS name : 'TT 1533' Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419812:495) PLC Serial Number: 06075233 Jan 1 00:00:40 sigmatek-arm user.info LRT: (00:00:40.419819:495) FPGA version : none Jan 1 00:00:40 sigmatek-arm user.notice LRT: (00:00:40.420345:495) starting up NetBIOS Listener Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.421029:495) OSsslInit: OpenSSL library version and release date: OpenSSL 1.0.2j 26 Sep 2016 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.424973:495) Hardware feature: Name:'TT 1933-S' Display/LED-Config:4 PlcType:IMX6 SF:0x1 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.425309:495) CAN subsystem running... Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.425320:495) No ECATM available Jan 1 00:00:41 sigmatek-arm user.info kernel: X-LRT-Timer: Sigmatek LRT Driver: time-keeper: startup Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.432938:495) SoftPWM not available Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436678:495) ########## previous powerdown state ########## Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436685:495) # PDS: Reboot triggered by a Reboot command sent over the command line interface Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436693:495) # Date/Time: 1970-01-01 00:07:03 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436698:495) ############################################## Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436702:495) SRAM Info Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436707:495) Physical-MEM, physical SRAM on device Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436713:495) SRAM Start : 0x0E000000, 524288 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436745:495) UsrObjSramStart : 0x0E000000, 507904 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436754:495) UsrRetainStart : 0x00000000, 0 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436763:495) UsrRetainRamStart: 0x00000000, 0 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436771:495) SysSramStart : 0x0E07C000, 16384 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436780:495) Physical SRAM : 0x000000000E000000, 524288 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.436797:495) m-sram init : mapped Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.442074:503) FS FileServerThread: started 0 Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.730228:495) SD WriteStatistic: drive-0: sernum '029b70e2', 117600 sector-writes, 1099 operating-seconds, 0 sramdisk-writes Jan 1 00:00:41 sigmatek-arm user.info LRT: (00:00:41.767125:495) Using simple memory allocator for 'AppCode' heap. Size=10240 kB addr=0x60000000 Jan 1 00:00:41 sigmatek-arm user.notice LRT-Mgr: (00:00:41.782748:493) Connection Manager: listening at TCP port 1954 Jan 1 00:00:41 sigmatek-arm user.info LRT-Mgr: (00:00:41.814867:493) OSsslInit: OpenSSL library version and release date: OpenSSL 1.0.2j 26 Sep 2016 Jan 1 00:00:43 sigmatek-arm daemon.info init: Entering runlevel: 5 Jan 1 00:00:44 sigmatek-arm authpriv.warn dropbear[556]: Failed loading /etc/dropbear/dropbear_dss_host_key Jan 1 00:00:44 sigmatek-arm authpriv.warn dropbear[556]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key Jan 1 00:00:44 sigmatek-arm authpriv.info dropbear[561]: Running in background Jan 1 00:00:44 sigmatek-arm user.info LRT-Mgr: (00:00:44.442632:514) LslCLI_SetCAN:No CAN Interface 'CAN_1' Installed Jan 1 00:00:47 sigmatek-arm user.crit LRT-Mgr: (00:00:47.505124:514) call to lrtLoadAppl() but prj is not available