Hello,
I have installed Debian on my Zyxel NAS. My Nas ist Booting into Debian, but I have no Network.
Please see the Dump . Can anyone help please ??
I have installed Debian on my Zyxel NAS. My Nas ist Booting into Debian, but I have no Network.
Please see the Dump . Can anyone help please ??
U-Boot 2023.04-tld-1 (Jun 24 2023 - 17:50:21 -0700)
ZyXEL NSA325 2-Bay Power Media Server
SoC: Kirkwood 88F6282_A1
Model: ZyXEL NSA325
DRAM: 512 MiB
Core: 19 devices, 15 uclasses, devicetree: separate
NAND: 128 MiB
Loading Environment from NAND... OK
Resetting console stdin/stdout/stderr to serial...
In: serial
Out: serial
Err: serial
pcie0.0: Link up
Net: eth0: ethernet-controller@72000
Hit any key to stop autoboot: 0
resetting USB...
Bus ehci@50000: USB EHCI 1.00
Bus xhci_pci: Register 4000820 NbrPorts 4
Starting the controller
USB XHCI 0.96
scanning bus ehci@50000 for devices... 3 USB Device(s) found
scanning bus xhci_pci for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
6389353 bytes read in 191 ms (31.9 MiB/s)
5792112 bytes read in 172 ms (32.1 MiB/s)
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-6.7.5-kirkwood-tld-1
Created: 2024-04-07 13:52:21 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6389289 Bytes = 6.1 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02100000 ...
Image Name: initramfs-6.7.5-kirkwood-tld-1
Created: 2024-04-07 13:52:44 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 5792048 Bytes = 5.5 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Working FDT set to 0
Starting kernel ...
Loading Kernel Image
Loading Ramdisk to 1f5c6000, end 1fb4c130 ... OK
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 6.7.5-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Sat Feb 17 16:27:56 PST 2024
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Seagate GoFlex Net
[ 0.000000][ T0] printk: legacy bootconsole [earlycon0] enabled
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000][ T0] Memory: 491848K/524288K available (12288K kernel code, 1781K rwdata, 5588K rodata, 1024K init, 309K bss, 32440K reserved, 0K cma-reserved)
[ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000001][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.008650][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.015992][ T0] Console: colour dummy device 80x30
[ 0.021268][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.032598][ T0] CPU: Testing write buffer coherency: ok
[ 0.038327][ T0] pid_max: default: 32768 minimum: 301
[ 0.050501][ T0] LSM: initializing lsm=capability,integrity
[ 0.058235][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.066350][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.085759][ T1] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[ 0.093935][ T1] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[ 0.102682][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.109937][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.116229][ T1] rcu: Hierarchical SRCU implementation.
[ 0.121831][ T1] rcu: Max phase no-delay instances is 1000.
[ 0.130272][ T1] devtmpfs: initialized
[ 0.142646][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.153334][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.163355][ T1] prandom: seed boundary self test passed
[ 0.172184][ T1] prandom: 100 self tests passed
[ 0.177011][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.187065][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.194533][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.206297][ T1] audit: initializing netlink subsys (disabled)
[ 0.214387][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.214504][ T20] audit: type=2000 audit(0.200:1): state=initialized audit_enabled=0 res=1
[ 0.229849][ T1] cpuidle: using governor ladder
[ 0.234748][ T1] cpuidle: using governor menu
[ 0.239945][ T1] Feroceon L2: Enabling L2
[ 0.244274][ T1] Feroceon L2: Cache support initialised.
[ 0.257466][ T1] No ATAGs?
[ 0.628663][ T1] raid6: int32x8 gen() 152 MB/s
[ 0.968665][ T1] raid6: int32x4 gen() 140 MB/s
[ 1.308664][ T1] raid6: int32x2 gen() 181 MB/s
[ 1.648661][ T1] raid6: int32x1 gen() 131 MB/s
[ 1.653661][ T1] raid6: using algorithm int32x2 gen() 181 MB/s
[ 2.008661][ T1] raid6: .... xor() 115 MB/s, rmw enabled
[ 2.014268][ T1] raid6: using intx1 recovery algorithm
[ 2.040130][ T1] SCSI subsystem initialized
[ 2.045257][ T1] usbcore: registered new interface driver usbfs
[ 2.058728][ T1] usbcore: registered new interface driver hub
[ 2.064816][ T1] usbcore: registered new device driver usb
[ 2.088955][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 2.094640][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.118696][ T1] PTP clock support registered
[ 2.125619][ T1] vgaarb: loaded
[ 2.139378][ T1] clocksource: Switched to clocksource orion_clocksource
[ 2.166193][ T1] VFS: Disk quotas dquot_6.6.0
[ 2.179737][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.221867][ T1] NET: Registered PF_INET protocol family
[ 2.227761][ T1] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.251483][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 2.269555][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.278087][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.309458][ T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 2.317865][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.339946][ T1] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 2.348096][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.369415][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 2.377913][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.400357][ T1] RPC: Registered named UNIX socket transport module.
[ 2.407009][ T1] RPC: Registered udp transport module.
[ 2.429393][ T1] RPC: Registered tcp transport module.
[ 2.434825][ T1] RPC: Registered tcp-with-tls transport module.
[ 2.449393][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.456578][ T1] PCI: CLS 0 bytes, default 32
[ 2.469989][ T19] Trying to unpack rootfs image as initramfs...
[ 3.230016][ T19] Freeing initrd memory: 5660K
[ 3.358765][ T1] Initialise system trusted keyrings
[ 3.364854][ T1] Key type blacklist registered
[ 3.369947][ T1] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 3.377179][ T1] zbud: loaded
[ 3.394338][ T1] NFS: Registering the id_resolver key type
[ 3.400182][ T1] Key type id_resolver registered
[ 3.405082][ T1] Key type id_legacy registered
[ 3.409976][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.417451][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 3.426981][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 3.435517][ T1] fuse: init (API version 7.39)
[ 3.441495][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 3.448947][ T1] orangefs_init: module version upstream loaded
[ 3.455392][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 3.679347][ T1] xor: measuring software checksum speed
[ 3.691514][ T1] arm4regs : 1492 MB/sec
[ 3.707588][ T1] 8regs : 895 MB/sec
[ 3.720430][ T1] 32regs : 1270 MB/sec
[ 3.725506][ T1] xor: using function: arm4regs (1492 MB/sec)
[ 3.731474][ T1] async_tx: api initialized (async)
[ 3.736554][ T1] Key type asymmetric registered
[ 3.741385][ T1] Asymmetric key parser 'x509' registered
[ 3.787437][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 3.796207][ T1] io scheduler bfq registered
[ 3.942410][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 3.951912][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 3.962612][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 3.973481][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 4.041429][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 4.053412][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 4.121420][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 4.133631][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 4.142942][ T1] printk: legacy console [ttyS0] disabled
[ 4.149131][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A
[ 4.158952][ T1] printk: legacy console [ttyS0] enabled
[ 4.158952][ T1] printk: legacy console [ttyS0] enabled
[ 4.170075][ T1] printk: legacy bootconsole [earlycon0] disabled
[ 4.170075][ T1] printk: legacy bootconsole [earlycon0] disabled
[ 4.209772][ T1] loop: module loaded
[ 4.214577][ T1] sata_mv f1080000.sata: slots 32 ports 2
[ 4.224143][ T1] scsi host0: sata_mv
[ 4.229283][ T1] scsi host1: sata_mv
[ 4.233589][ T1] ata1: SATA max UDMA/133 irq 28 lpm-pol 0
[ 4.239283][ T1] ata2: SATA max UDMA/133 irq 28 lpm-pol 0
[ 4.246030][ T1] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
[ 4.253182][ T1] nand: Eon NAND 128MiB 3,3V 8-bit
[ 4.258178][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.266532][ T1] Scanning device for bad blocks
[ 4.276706][ T1] Bad eraseblock 100 at 0x000000c80000
[ 4.287346][ T1] Bad eraseblock 200 at 0x000001900000
[ 4.336264][ T1] 4 fixed-partitions partitions found on MTD device orion_nand
[ 4.343727][ T1] Creating 4 MTD partitions on "orion_nand":
[ 4.349609][ T1] 0x000000000000-0x000000100000 : "u-boot"
[ 4.356043][ T1] 0x000000100000-0x000000500000 : "uImage"
[ 4.362371][ T1] 0x000000500000-0x000002500000 : "pogoplug"
[ 4.368961][ T1] 0x000002500000-0x00000fd00000 : "root"
[ 4.374502][ T1] mtd: partition "root" extends beyond the end of device "orion_nand" -- size truncated to 0x5b00000
[ 4.386862][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 4.395470][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 4.409527][ T1] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 0 is missing.
[ 4.417885][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 4.426754][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 4.433086][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 4.441735][ T1] orion-ehci f1050000.ehci: irq 31, io mem 0xf1050000
[ 4.469426][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 4.476523][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 4.485581][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.493576][ T1] usb usb1: Product: EHCI Host Controller
[ 4.499206][ T1] usb usb1: Manufacturer: Linux 6.7.5-kirkwood-tld-1 ehci_hcd
[ 4.506583][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 4.512919][ T1] hub 1-0:1.0: USB hub found
[ 4.517470][ T1] hub 1-0:1.0: 1 port detected
[ 4.523015][ T1] usbcore: registered new interface driver usb-storage
[ 4.530356][ T1] mousedev: PS/2 mouse device common for all mice
[ 4.582293][ T53] ata1: SATA link down (SStatus 0 SControl F300)
[ 4.809409][ T8] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 4.930897][ T55] ata2: SATA link down (SStatus 0 SControl F300)
[ 5.011113][ T8] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
[ 5.020069][ T8] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.027956][ T8] usb 1-1: Product: USB2.0 Hub
[ 5.033615][ T8] hub 1-1:1.0: USB hub found
[ 5.038492][ T8] hub 1-1:1.0: 4 ports detected
[ 5.359402][ T8] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 5.510615][ T8] usb 1-1.2: New USB device found, idVendor=0781, idProduct=55a3, bcdDevice= 1.00
[ 5.519742][ T8] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.527813][ T8] usb 1-1.2: Product: SanDisk 3.2Gen1
[ 5.533172][ T8] usb 1-1.2: Manufacturer: USB
[ 5.537900][ T8] usb 1-1.2: SerialNumber: 0101fa8ba328daf2a7dff770070d5a292729e1de726d31521c70d65204c17465c579000000000000000000005bd6fd25008d4000a35581079dab63eb
[ 5.553684][ T8] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 5.561514][ T8] scsi host2: usb-storage 1-1.2:1.0
[ 5.609406][ T1] rtc-mv f1010300.rtc: internal RTC not ticking
[ 5.615760][ T1] i2c_dev: i2c /dev entries driver
[ 5.621732][ T1] device-mapper: uevent: version 1.0.3
[ 5.627566][ T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 5.637348][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 5.644677][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 5.652054][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 5.659583][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 5.667119][ T1] sdhci: Secure Digital Host Controller Interface driver
[ 5.674066][ T1] sdhci: Copyright(c) Pierre Ossman
[ 5.681482][ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.688313][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 5.694687][ T1] drop_monitor: Initializing network drop monitor service
[ 5.703115][ T1] NET: Registered PF_INET6 protocol family
[ 5.710795][ T1] Segment Routing with IPv6
[ 5.715187][ T1] RPL Segment Routing with IPv6
[ 5.720011][ T1] In-situ OAM (IOAM) with IPv6
[ 5.724778][ T1] NET: Registered PF_PACKET protocol family
[ 5.730990][ T1] Key type dns_resolver registered
[ 5.751527][ T1] registered taskstats version 1
[ 5.756499][ T1] Loading compiled-in X.509 certificates
[ 5.792623][ T1] Key type .fscrypt registered
[ 5.797287][ T1] Key type fscrypt-provisioning registered
[ 5.807587][ T1] Key type big_key registered
[ 5.983332][ T1] Key type encrypted registered
[ 6.068180][ T115] "cryptomgr_test" (115) uses obsolete ecb(arc4) skcipher
[ 6.572032][ T11] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[ 6.591390][ T30] sd 2:0:0:0: [sda] 240353280 512-byte logical blocks: (123 GB/115 GiB)
[ 6.610144][ T30] sd 2:0:0:0: [sda] Write Protect is off
[ 6.616383][ T30] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.647228][ T30] sda: sda1
[ 6.650891][ T30] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 7.824149][ T1] clk: Disabling unused clocks
[ 7.832122][ T1] Freeing unused kernel image (initmem) memory: 1024K
[ 7.859988][ T1] Checked W+X mappings: passed, no W+X pages found
[ 7.866396][ T1] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 252.17-1~deb12u1
[ 8.995590][ T167] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[ 19.049737][ T49] platform mv643xx_eth_port.0: deferred probe pending
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.38.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 23081/7512064 files, 851952/30043904 blocks
done.
[ 20.383420][ T186] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 20.632632][ T186] EXT4-fs (sda1): mounted filesystem 3cc46040-e3cc-4f11-a2e6-effa4630a110 ro with ordered data mode. Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 3.06 booting
INIT: No inittab.d directory found
Using makefile-style concurrent boot in runlevel S.
Setting hostname to 'debian'...done.
Starting hotplug events dispatcher: systemd-udevd.
Synthesizing the initial hotplug events (subsystems)...done.
Synthesizing the initial hotplug events (devices)...done.
Waiting for /dev to be fully populated...[ 23.572608][ T371] orion_wdt: Initial timeout 21 sec
[ 24.121710][ T367] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 24.249738][ T364] sd 2:0:0:0: Attached scsi generic sg0 type 0
done.
Activating swap:.
[ 25.533288][ T513] EXT4-fs (sda1): re-mounted 3cc46040-e3cc-4f11-a2e6-effa4630a110 r/w. Quota mode: none.
[ 25.929479][ C0] random: crng init done
Will now check all file systems.
Checking all file systems.
LABEL=rootfs is mounted
Done checking file systems.
Log is being saved in /var/log/fsck/checkfs if that location is writable.
Cleaning up temporary files...Cleaning /tmp...done.
/tmp.
Will now mount local filesystems:.
Will now activate swapfile swap, if any:done.
Checking minimum space in /tmp...done.
Cleaning up temporary files....
Starting Setting kernel variables: sysctl.
Initializing random number generator...done.
Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.3-P1
Copyright 2004-2022 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0"
Failed to get interface index: No such device
If you think you have received this message due to a bug rather
than a configuration issue please read the section on submitting
bugs on either our web page at www.isc.org or in the README file
before submitting a bug. These pages explain the proper
process and the information we find helpful for debugging.
exiting.
ifup: failed to bring up eth0
failed.
Starting RPC port mapper daemon: rpcbind.
Starting NFS common utilities: statd idmapd.
Cleaning up temporary files....
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Not starting NFS kernel daemon: no exports ... (warning).
Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
996 (syslogd)
.
Starting system message bus: dbus.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting NTP server: ntpd1969-12-31T16:00:30 ntpd[1041]: INIT: ntpd ntpsec-1.2.2: Starting
1969-12-31T16:00:30 ntpd[1041]: INIT: Command line: /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:106
.
Starting NTP server: ntpd.
Starting OpenBSD Secure Shell server: sshd.
Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1021 (klogd)
.
Running local boot scripts (/etc/rc.local)
.
Debian GNU/Linux 12 debian ttyS0
debian login:
arch=arm
baudrate=115200
board=nsa325
board_name=nsa325
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefi x}${script}; source ${scriptaddr}
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_net_usb_start=usb start
boot_pci_enum=pci enum
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=usb0 sata0 dhcp
bootcmd=usb reset; run usb_bootcmd; usb stop; reset
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; run boot_pci_enum; if dhcp ${ scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;
bootcmd_sata0=devnum=0; run sata_boot
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=10
console=ttyS0,115200
cpu=arm926ejs
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
dtb_file=/boot/dts/kirkwood-nsa310.dtb
ethact=eth0
ethaddr=5C:F4:AB:DE:EB:1A
fdt_addr_r=0x2c00000
fdtcontroladdr=1fb516e0
fdtfile=kirkwood-nsa325.dtb
kernel_addr_r=0x800000
load_uimage=ext2load usb 0:1 0x800000 /boot/uImage
load_uinitrd=ext2load usb 0:1 0x2100000 /boot/uInitrd
loadaddr=0x800000
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:0x100000(uboot),0x80000(stock_uboot_env),0x80000(ke y_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00 000(kernel_2),0x2FC0000(rootfs2)
ramdisk_addr_r=0x01100000
sata_boot=if sata dev ${devnum}; then devtype=sata; run scan_dev_for_boot_part; fi
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scrip ts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env ex ists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fs type ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtyp e} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi ; done; setenv devplist
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefi x}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boo t_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${d evnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${pr efix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x200000
soc=kirkwood
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubi vol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubi vol}; run scan_dev_for_boot; ubifsumount; fi
usb_boot=mw 0x800000 0 1; run load_uimage; run load_uinitrd; bootm 0x800000 0x21 00000
usb_bootcmd=run usb_set_bootargs; run usb_boot
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdela y=10 earlyprintk=serial
vendor=zyxel
ver=U-Boot 2023.04-tld-1 (Jun 24 2023 - 17:50:21 -0700)\
ZyXEL NSA325 2-Bay Power Media Server