Hello,
I've managed to mangle up u-boot on this WD EX4100 by trying to flash "u-boot-a38x-Yellowstone_2014T30p6_bodhi-tld-6-nand-uart.bin" from within uboot.
My ultimate goal was to run Debian on this box. I wasn't able to boot into rootfs made with Debian-6.6.2-mvebu-tld-1-rootfs-bodhi.tar.bz2 (I think because USB power doesn't work in stock u-boot for this box?)
Prior to breaking the stock uboot, I made ecc/oob and nonecc/nonoob backups of all the flash partitions. I'm also able to kwboot with the same uboot-tld6.bin, and the box will boot fine into stock WD firmware using this method.
How can I flash the uboot-tld-6 to NAND from inside kwbooted uboot-tld6 ?
How do I restore the saved nand dumps (since my previous attempt fails, and box can only be booted with kwboot).
My brain has been turned to mush from fighting with this box for so many days now, and trying to make sense of the 30+ pages from saschadd and hmartin's threads, so any help appreciated.
Logs below:
Log1) Boot Debian from rootfs, fail
Log2) Flash uboot-tld6 using nand write, fail
Log3) Kwboot log (where I am now)
Log1: Boot Debian from rootfs, fail
Log2: Flash uboot-tld6 using nand write, fail
Log3: Kwboot log (where I am now)
~4eep
I've managed to mangle up u-boot on this WD EX4100 by trying to flash "u-boot-a38x-Yellowstone_2014T30p6_bodhi-tld-6-nand-uart.bin" from within uboot.
My ultimate goal was to run Debian on this box. I wasn't able to boot into rootfs made with Debian-6.6.2-mvebu-tld-1-rootfs-bodhi.tar.bz2 (I think because USB power doesn't work in stock u-boot for this box?)
Prior to breaking the stock uboot, I made ecc/oob and nonecc/nonoob backups of all the flash partitions. I'm also able to kwboot with the same uboot-tld6.bin, and the box will boot fine into stock WD firmware using this method.
How can I flash the uboot-tld-6 to NAND from inside kwbooted uboot-tld6 ?
How do I restore the saved nand dumps (since my previous attempt fails, and box can only be booted with kwboot).
My brain has been turned to mush from fighting with this box for so many days now, and trying to make sense of the 30+ pages from saschadd and hmartin's threads, so any help appreciated.
Logs below:
Log1) Boot Debian from rootfs, fail
Log2) Flash uboot-tld6 using nand write, fail
Log3) Kwboot log (where I am now)
Log1: Boot Debian from rootfs, fail
## Booting image at 02000000 ... ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-6.6.2-mvebu-tld-1 Created: 2024-10-12 19:07:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5197128 Bytes = 5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02900000 ... Image Name: initramfs-6.6.2-mvebu-tld-1 Created: 2023-12-12 22:03:52 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5257109 Bytes = 5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK stopping USB.. Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.6.2-mvebu-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for D3 [ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000][ T0] OF: fdt: Machine model: WD My Cloud EX4100 [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000][ T0] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000][ T0] percpu: Embedded 29 pages/cpu s25364 r8192 d85228 u118784 [ 0.000000][ T0] Kernel command line: root=/dev/ram console=ttyS0,115200 [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 2053708K/2097152K available (10240K kernel code, 873K rwdata, 3492K rodata, 1024K init, 314K bss, 4) [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000 [ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000001][ T0] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns [ 0.000015][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636s [ 0.000032][ T0] Switching to timer-based delay loop, resolution 1ns [ 0.000219][ T0] Ignoring duplicate/late registration of read_current_timer delay [ 0.000224][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000507][ T0] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.000776][ T0] Console: colour dummy device 80x30 [ 0.000804][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000) [ 0.000814][ T0] CPU: Testing write buffer coherency: ok [ 0.000840][ T0] CPU0: Spectre v2: using BPIALL workaround [ 0.000844][ T0] pid_max: default: 32768 minimum: 301 [ 0.003553][ T0] LSM: initializing lsm=capability,integrity [ 0.004323][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004331][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007802][ T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008500][ T1] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.008613][ T1] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.008705][ T1] Setting up static identity map for 0x100000 - 0x100060 [ 0.008804][ T1] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0x4 [ 0.008907][ T1] mvebu-pmsu: Initializing Power Management Service Unit [ 0.009025][ T1] rcu: Hierarchical SRCU implementation. [ 0.009029][ T1] rcu: Max phase no-delay instances is 1000. [ 0.009588][ T1] smp: Bringing up secondary CPUs ... [ 0.009936][ T1] Booting CPU 1 [ 0.010086][ T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010098][ T0] CPU1: Spectre v2: using BPIALL workaround [ 0.010201][ T1] smp: Brought up 1 node, 2 CPUs [ 0.010208][ T1] SMP: Total of 2 processors activated (3200.00 BogoMIPS). [ 0.010213][ T1] CPU: All CPU(s) started in SVC mode. [ 0.011177][ T1] devtmpfs: initialized [ 0.014316][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.014554][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014572][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.016346][ T1] prandom: seed boundary self test passed [ 0.017672][ T1] prandom: 100 self tests passed [ 0.017677][ T1] pinctrl core: initialized pinctrl subsystem [ 0.018842][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.019416][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.021646][ T1] audit: initializing netlink subsys (disabled) [ 0.021805][ T30] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.022215][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.022262][ T1] cpuidle: using governor ladder [ 0.022279][ T1] cpuidle: using governor menu [ 0.022374][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.022380][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.022517][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.022525][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.024533][ T1] platform soc: Fixed dependency cycle(s) with /soc/internal-regs/interrupt-controller@d000 [ 0.200157][ T1] raid6: int32x8 gen() 319 MB/s [ 0.370141][ T1] raid6: int32x4 gen() 333 MB/s [ 0.540105][ T1] raid6: int32x2 gen() 551 MB/s [ 0.710105][ T1] raid6: int32x1 gen() 637 MB/s [ 0.710108][ T1] raid6: using algorithm int32x1 gen() 637 MB/s [ 0.880104][ T1] raid6: .... xor() 247 MB/s, rmw enabled [ 0.880108][ T1] raid6: using intx1 recovery algorithm [ 0.881139][ T1] SCSI subsystem initialized [ 0.881421][ T1] usbcore: registered new interface driver usbfs [ 0.881447][ T1] usbcore: registered new interface driver hub [ 0.881474][ T1] usbcore: registered new device driver usb [ 0.881693][ T1] pps_core: LinuxPPS API ver. 1 registered [ 0.881697][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.881709][ T1] PTP clock support registered [ 0.882924][ T1] vgaarb: loaded [ 0.883229][ T1] clocksource: Switched to clocksource arm_global_timer [ 0.886097][ T1] VFS: Disk quotas dquot_6.6.0 [ 0.886245][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.893055][ T1] NET: Registered PF_INET protocol family [ 0.893207][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.894434][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.894504][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.894531][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.894597][ T1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.894717][ T1] TCP: Hash tables configured (established 8192 bind 8192) [ 0.894988][ T1] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.895145][ T1] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.895167][ T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.895492][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.895992][ T1] RPC: Registered named UNIX socket transport module. [ 0.895998][ T1] RPC: Registered udp transport module. [ 0.896001][ T1] RPC: Registered tcp transport module. [ 0.896003][ T1] RPC: Registered tcp-with-tls transport module. [ 0.896006][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.896015][ T1] PCI: CLS 0 bytes, default 64 [ 0.896193][ T29] Trying to unpack rootfs image as initramfs... [ 0.913649][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.915463][ T1] Initialise system trusted keyrings [ 0.915561][ T1] Key type blacklist registered [ 0.916408][ T1] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.916445][ T1] zbud: loaded [ 0.922008][ T1] NFS: Registering the id_resolver key type [ 0.922038][ T1] Key type id_resolver registered [ 0.922042][ T1] Key type id_legacy registered [ 0.922135][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.922145][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.003088][ T1] xor: measuring software checksum speed [ 1.006907][ T1] arm4regs : 2609 MB/sec [ 1.011825][ T1] 8regs : 2003 MB/sec [ 1.016580][ T1] 32regs : 2081 MB/sec [ 1.016587][ T1] xor: using function: arm4regs (2609 MB/sec) [ 1.016602][ T1] async_tx: api initialized (async) [ 1.016614][ T1] Key type asymmetric registered [ 1.016617][ T1] Asymmetric key parser 'x509' registered [ 1.016839][ T1] bounce: pool size: 64 pages [ 1.017220][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.017507][ T1] io scheduler bfq registered [ 1.025931][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 1.027051][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 1.027424][ T1] debugfs: Directory 'f1018100.gpio' with parent 'regmap' already present! [ 1.028036][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 1.028382][ T1] debugfs: Directory 'f1018140.gpio' with parent 'regmap' already present! [ 1.030000][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.047134][ T29] Freeing initrd memory: 5136K [ 1.084137][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.086397][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.144091][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.221061][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.224851][ T1] printk: console [ttyS0] disabled [ 1.245732][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 39, base_baud = 12500000) is a 16550A [ 1.245777][ T1] printk: console [ttyS0] enabled [ 2.317461][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 40, base_baud = 12500000) is a 16550A [ 2.328893][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator [ 2.337416][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator [ 2.345691][ T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator [ 2.354342][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 2.364147][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.375110][ T1] scsi host0: ahci-mvebu [ 2.380123][ T1] scsi host1: ahci-mvebu [ 2.384567][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41 [ 2.393244][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41 [ 2.402175][ T1] ahci-mvebu f10e0000.sata: supply ahci not found, using dummy regulator [ 2.410697][ T1] ahci-mvebu f10e0000.sata: supply phy not found, using dummy regulator [ 2.418992][ T1] ahci-mvebu f10e0000.sata: supply target not found, using dummy regulator [ 2.427611][ T1] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 2.437417][ T1] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.448335][ T1] scsi host2: ahci-mvebu [ 2.453150][ T1] scsi host3: ahci-mvebu [ 2.457600][ T1] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 42 [ 2.466269][ T1] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 42 [ 2.476397][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc [ 2.483507][ T1] nand: Hynix H27U4G8F2DTR-BC [ 2.488059][ T1] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.496676][ T1] Bad block table found at page 262080, version 0x01 [ 2.503552][ T1] Bad block table found at page 262016, version 0x01 [ 2.510263][ T1] nand_read_bbt: bad block at 0x000001040000 [ 2.516135][ T1] nand_read_bbt: bad block at 0x000007f20000 [ 2.522001][ T1] nand_read_bbt: bad block at 0x00000ff00000 [ 2.527865][ T1] nand_read_bbt: bad block at 0x00000ff20000 [ 2.533739][ T1] nand_read_bbt: bad block at 0x000016140000 [ 2.539695][ T1] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0 [ 2.547406][ T1] Creating 8 MTD partitions on "pxa3xx_nand-0": [ 2.553536][ T1] 0x000000000000-0x000000500000 : "U-Boot" [ 2.560480][ T1] 0x000000500000-0x000000f00000 : "uImage" [ 2.567310][ T1] 0x000000a00000-0x000001900000 : "uRamdisk" [ 2.574206][ T1] 0x000000f00000-0x00001d700000 : "image.cfs" [ 2.582212][ T1] 0x00001c800000-0x000039f00000 : "rescue_fw" [ 2.588186][ T1] mtd: partition "rescue_fw" extends beyond the end of device "pxa3xx_nand-0" -- size truncated to 0x3800000 [ 2.600899][ T1] 0x00001d700000-0x00003c200000 : "config" [ 2.606609][ T1] mtd: partition "config" extends beyond the end of device "pxa3xx_nand-0" -- size truncated to 0x2900000 [ 2.618987][ T1] 0x00001eb00000-0x00003e000000 : "reserve1" [ 2.624872][ T1] mtd: partition "reserve1" extends beyond the end of device "pxa3xx_nand-0" -- size truncated to 0x1500000 [ 2.637469][ T1] 0x00001f500000-0x00003f400000 : "reserve2" [ 2.643355][ T1] mtd: partition "reserve2" extends beyond the end of device "pxa3xx_nand-0" -- size truncated to 0xb00000 [ 2.657238][ T1] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 2.665228][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 2.673810][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 2.699390][ T1] hwmon hwmon0: temp1_input not attached to any thermal zone [ 2.716460][ T1] hwmon hwmon1: temp1_input not attached to any thermal zone [ 2.723793][ T679] ata1: SATA link down (SStatus 0 SControl 300) [ 2.729968][ T690] ata2: SATA link down (SStatus 0 SControl 300) [ 2.737431][ T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled [ 2.751261][ T1] mvneta f1070000.ethernet eth0: Using random mac address 2a:17:74:6d:7a:95 [ 2.765451][ T1] mvneta f1030000.ethernet eth1: Using random mac address 42:26:6f:a6:0a:05 [ 2.774692][ T1] usbcore: registered new interface driver smsc75xx [ 2.781496][ T1] orion-ehci f1058000.usb: EHCI Host Controller [ 2.787780][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 2.796205][ T1] orion-ehci f1058000.usb: irq 46, io mem 0xf1058000 [ 2.807849][ T699] ata3: SATA link down (SStatus 0 SControl 300) [ 2.814017][ T709] ata4: SATA link down (SStatus 0 SControl 300) [ 2.823244][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 2.830066][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.839112][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.847077][ T1] usb usb1: Product: EHCI Host Controller [ 2.852675][ T1] usb usb1: Manufacturer: Linux 6.6.2-mvebu-tld-1 ehci_hcd [ 2.859763][ T1] usb usb1: SerialNumber: f1058000.usb [ 2.865729][ T1] hub 1-0:1.0: USB hub found [ 2.870221][ T1] hub 1-0:1.0: 1 port detected [ 2.875907][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.881960][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 2.890280][ T1] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010 [ 2.900284][ T1] xhci-hcd f10f0000.usb3: irq 47, io mem 0xf10f0000 [ 2.907199][ T1] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.913260][ T1] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 2.921489][ T1] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 2.928695][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 2.937712][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.945678][ T1] usb usb2: Product: xHCI Host Controller [ 2.951277][ T1] usb usb2: Manufacturer: Linux 6.6.2-mvebu-tld-1 xhci-hcd [ 2.958364][ T1] usb usb2: SerialNumber: f10f0000.usb3 [ 2.964350][ T1] hub 2-0:1.0: USB hub found [ 2.968841][ T1] hub 2-0:1.0: 1 port detected [ 2.973914][ T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.982835][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 2.991854][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.999815][ T1] usb usb3: Product: xHCI Host Controller [ 3.005475][ T1] usb usb3: Manufacturer: Linux 6.6.2-mvebu-tld-1 xhci-hcd [ 3.012556][ T1] usb usb3: SerialNumber: f10f0000.usb3 [ 3.018478][ T1] hub 3-0:1.0: USB hub found [ 3.022975][ T1] hub 3-0:1.0: 1 port detected [ 3.028354][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.034422][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 3.042711][ T1] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000000010 [ 3.052731][ T1] xhci-hcd f10f8000.usb3: irq 48, io mem 0xf10f8000 [ 3.059336][ T1] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.065422][ T1] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 3.073662][ T1] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 3.080860][ T1] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 3.089877][ T1] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.097845][ T1] usb usb4: Product: xHCI Host Controller [ 3.103450][ T1] usb usb4: Manufacturer: Linux 6.6.2-mvebu-tld-1 xhci-hcd [ 3.110530][ T1] usb usb4: SerialNumber: f10f8000.usb3 [ 3.116685][ T1] hub 4-0:1.0: USB hub found [ 3.121179][ T1] hub 4-0:1.0: 1 port detected [ 3.126277][ T1] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.135258][ T1] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 3.144275][ T1] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.152229][ T1] usb usb5: Product: xHCI Host Controller [ 3.157894][ T1] usb usb5: Manufacturer: Linux 6.6.2-mvebu-tld-1 xhci-hcd [ 3.164989][ T1] usb usb5: SerialNumber: f10f8000.usb3 [ 3.170933][ T1] hub 5-0:1.0: USB hub found [ 3.175486][ T1] hub 5-0:1.0: 1 port detected [ 3.181020][ T1] usbcore: registered new interface driver usblp [ 3.187461][ T1] usbcore: registered new interface driver usb-storage [ 3.194664][ T1] mousedev: PS/2 mouse device common for all mice [ 3.202593][ T1] armada38x-rtc f10a3800.rtc: registered as rtc0 [ 3.208919][ T1] armada38x-rtc f10a3800.rtc: setting system clock to 2024-10-15T00:58:53 UTC (1728953933) [ 3.219687][ T1] i2c_dev: i2c /dev entries driver [ 3.224953][ T1] mv64xxx_i2c f1011000.i2c: can't get pinctrl, bus recovery not supported [ 3.233784][ T1] mv64xxx_i2c f1011100.i2c: can't get pinctrl, bus recovery not supported [ 3.246166][ T1] orion_wdt: Initial timeout 171 sec [ 3.251907][ T1] device-mapper: uevent: version 1.0.3 [ 3.257668][ T1] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.266883][ T105] usb 2-1: new high-speed USB device number 2 using xhci-hcd [ 3.273621][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 3.281410][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 3.288846][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 3.296346][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 3.303330][ T1] sdhci: Secure Digital Host Controller Interface driver [ 3.310239][ T1] sdhci: Copyright(c) Pierre Ossman [ 3.315429][ T1] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.323843][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered [ 3.332482][ T1] hid: raw HID events driver (C) Jiri Kosina [ 3.338840][ T1] usbcore: registered new interface driver usbhid [ 3.345160][ T1] usbhid: USB HID core driver [ 3.351770][ T1] NET: Registered PF_INET6 protocol family [ 3.358673][ T1] Segment Routing with IPv6 [ 3.363056][ T1] RPL Segment Routing with IPv6 [ 3.367858][ T26] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA [ 3.376058][ T1] In-situ OAM (IOAM) with IPv6 [ 3.380806][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.388930][ T1] NET: Registered PF_PACKET protocol family [ 3.394886][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 3.399881][ T1] Key type dns_resolver registered [ 3.405029][ T1] ThumbEE CPU extension supported. [ 3.410039][ T1] Registering SWP/SWPB emulation handler [ 3.443110][ T1] registered taskstats version 1 [ 3.448078][ T1] Loading compiled-in X.509 certificates [ 3.465384][ T105] usb 2-1: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 3.465575][ T1] Key type .fscrypt registered [ 3.474374][ T105] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.479091][ T1] Key type fscrypt-provisioning registered [ 3.488144][ T105] hub 2-1:1.0: USB hub found [ 3.493613][ T1] Key type big_key registered [ 3.497186][ T105] hub 2-1:1.0: 4 ports detected [ 3.522763][ T1] Key type encrypted registered [ 3.529905][ T1] clk: Disabling unused clocks [ 3.536480][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 3.573813][ T1] Checked W+X mappings: passed, no W+X pages found [ 3.580206][ T1] Run /init as init process Loading, please wait... [ 3.613490][ T10] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.645136][ T10] usb 3-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 3.654092][ T10] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.663555][ T10] hub 3-1:1.0: USB hub found [ 3.668793][ T10] hub 3-1:1.0: 4 ports detected Starting systemd-udevd version 252.19-1~deb12u1 [ 4.253483][ T1352] mtdblock: MTD device 'U-Boot' is NAND, please consider using UBI block devices instead. [ 4.263767][ T1346] mtdblock: MTD device 'uRamdisk' is NAND, please consider using UBI block devices instead. [ 4.264512][ T1345] mtdblock: MTD device 'uImage' is NAND, please consider using UBI block devices instead. [ 4.289412][ T1351] mtdblock: MTD device 'rescue_fw' is NAND, please consider using UBI block devices instead. [ 4.299083][ T1349] mtdblock: MTD device 'reserve2' is NAND, please consider using UBI block devices instead. [ 4.302095][ T1350] mtdblock: MTD device 'config' is NAND, please consider using UBI block devices instead. [ 4.319595][ T1349] mtdblock: MTD device 'reserve1' is NAND, please consider using UBI block devices instead. [ 4.325177][ T1354] mtdblock: MTD device 'image.cfs' is NAND, please consider using UBI block devices instead. Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/ram does not exist. Dropping to a shell!
Log2: Flash uboot-tld6 using nand write, fail
resetting ...
BootROM - 1.73
Booting from NAND flash
mvBoardIdGet: TWSI Read for Marvell Board ID failed (57)
Using default board ID
General initialization - Version: 1.0.0
Detected Device ID 6828
High speed PHY - Version: 2.0
Initialize DB-88F6820-BP board topology
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 06 | SATA0 |
| 1 | 00 | SGMII1 |
| 2 | 06 | SATA1 |
| 3 | 06 | SATA3 |
| 4 | 05 | USB3 HOST0 |
| 5 | 06 | SATA2 |
--------------------------------
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.26.0
mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
DDR3 1 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01_v1.06 (Jan 08 2015 - 10:04:46) Marvell version: 2014_T3.0p6
mvBoardSatRRead: Error: Read from S@R failed
mvBoardSatRRead: Error: Read from S@R failed
mvBoardSatRRead: Error: Read from S@R failed
Board: DB-88F6820-BP
SoC: MV88F6828 Rev A0
running 2 CPUs
CPU: ARM Cortex A9 MPCore (Rev 1) LE
CPU 0
CPU @ 1600 [MHz]
L2 @ 800 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM: 2 GiB
Map: Code: 0x7fece000:0x7ff95d44
BSS: 0x7ffef254
Stack: 0x7f9cdf20
Heap: 0x7f9ce000:0x7fece000
raise: Signal # 8 caught
raise: Signal # 8 caught
U-Boot Environment: 0x00000000:0x00080000 (NAND)
NAND: ID: dcad ,512 MiB
MMC: mv_sdh: 0
USB2.0 0: Host Mode
USB3.0 0: Host Mode
USB3.0 1: Host Mode
Board configuration detected:
Creating 1 MTD partitions on "nand0":
0x00001f500000-0x00001ff00000 : "mtd=7"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=7"
UBI: MTD device size: 10 MiB
UBI: number of good PEBs: 80
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 32
UBI: total number of reserved PEBs: 48
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 4/1
UBIFS: mounted UBI device 0, volume 0, name "reserve2"
UBIFS: mounted read-only
UBIFS: file system size: 4063232 bytes (3968 KiB, 3 MiB, 32 LEBs)
UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 200807 bytes (196 KiB)
Loading file '/mac_addr' to addr 0x02000000 with size 36 (0x00000024)...
Done
lan mac_addr : 00 90 a9 e7 b6 2c
Set lan 0 WakeOnLan ok
Set lan 1 WakeOnLan ok
MicroP Enable HD
Enable HD1
Enable HD2
Enable HD3
Enable HD4
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga0 | RGMII | 0x00 |
| egiga1 | SGMII | 0x01 |
egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
Marvell>> 111111111111111<INTERRUPT>
Marvell>> usb start
(Re)start USB...
USB0: Port (usbActive) : 0 Interface (usbType = 3) : USB XHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Marvell>> ext4load usb 0:1 0x0800000 boot/uboot6.bin
956160 bytes read in 511 ms (1.8 MiB/s)
Marvell>> nand erase 0x0 0x60000
NAND erase: device 0 offset 0x0, size 0x60000
Erasing at 0x40000 -- 100% complete.
OK
Marvell>> nand write 0x0800000 0x0 0x60000
NAND write: device 0 offset 0x0, size 0x60000
393216 bytes written: OK
Marvell>> reset
resetting ...
BootROM - 1.73
Booting from NAND flashBootROM: Bad header at offset 00000000
BootROM: Bad header at offset 00010000
BootROM: Bad header at offset 00020000
BootROM: Bad header at offset 00030000
BootROM: Bad header at offset 00040000
BootROM: Bad header at offset 00050000
BootROM: Bad header at offset 00060000
BootROM: Bad header at offset 00070000
BootROM: Bad header at offset 00080000
BootROM: Bad header at offset 00090000
BootROM: Bad header at offset 000A0000
BootROM: Bad header at offset 000B0000
BootROM: Bad header at offset 000C0000
BootROM: Bad header at offset 000D0000
BootROM: Bad header at offset 000E0000
BootROM: Bad header at offset 000F0000
BootROM: Bad header at offset 00100000
BootROM: Bad header at offset 00110000
BootROM: Bad header at offset 00120000
BootROM: Bad header at offset 00130000
BootROM: Bad header at offset 00140000
BootROM: Bad header at offset 00150000
BootROM: Bad header at offset 00160000
BootROM: Bad header at offset 00170000
BootROM: Bad header at offset 00180000
BootROM:
Trying Uart ot
Log3: Kwboot log (where I am now)
ex@cd:~ $ ./kwboot -t -B 115200 /dev/ttyS0 -b uboot6.bin -s 0 -q 1 -t
kwboot version 2024.04-rc3-00001-g0861eab8ec-dirty
Detected kwbimage v1 with UART boot signature
Sending boot message. Please reboot the target...-
Sending boot image header (71552 bytes)...
0 % [......................................................................]
12 % [......................................................................]
25 % [......................................................................]
37 % [......................................................................]
50 % [......................................................................]
62 % [......................................................................]
75 % [......................................................................]
87 % [..................................................................... ]
Done
Sending boot image data (884608 bytes)...
0 % [......................................................................]
1 % [......................................................................]
2 % [......................................................................]
3 % [......................................................................]
4 % [......................................................................]
5 % [......................................................................]
6 % [......................................................................]
7 % [......................................................................]
8 % [......................................................................]
9 % [......................................................................]
10 % [......................................................................]
11 % [......................................................................]
12 % [......................................................................]
13 % [......................................................................]
14 % [......................................................................]
15 % [......................................................................]
16 % [......................................................................]
17 % [......................................................................]
18 % [......................................................................]
19 % [......................................................................]
20 % [......................................................................]
21 % [......................................................................]
22 % [......................................................................]
23 % [......................................................................]
24 % [......................................................................]
25 % [......................................................................]
26 % [......................................................................]
27 % [......................................................................]
28 % [......................................................................]
29 % [......................................................................]
30 % [......................................................................]
31 % [......................................................................]
32 % [......................................................................]
33 % [......................................................................]
34 % [......................................................................]
35 % [......................................................................]
36 % [......................................................................]
37 % [......................................................................]
38 % [......................................................................]
39 % [......................................................................]
40 % [......................................................................]
41 % [......................................................................]
42 % [......................................................................]
43 % [......................................................................]
44 % [......................................................................]
45 % [......................................................................]
46 % [......................................................................]
47 % [......................................................................]
48 % [......................................................................]
49 % [......................................................................]
50 % [......................................................................]
51 % [......................................................................]
52 % [......................................................................]
53 % [......................................................................]
54 % [......................................................................]
55 % [......................................................................]
56 % [......................................................................]
57 % [......................................................................]
58 % [......................................................................]
59 % [......................................................................]
60 % [......................................................................]
61 % [......................................................................]
62 % [......................................................................]
63 % [......................................................................]
64 % [......................................................................]
65 % [......................................................................]
66 % [......................................................................]
67 % [......................................................................]
68 % [......................................................................]
69 % [......................................................................]
70 % [......................................................................]
71 % [......................................................................]
72 % [......................................................................]
73 % [......................................................................]
74 % [......................................................................]
75 % [......................................................................]
76 % [......................................................................]
78 % [......................................................................]
79 % [......................................................................]
80 % [......................................................................]
81 % [......................................................................]
82 % [......................................................................]
83 % [......................................................................]
84 % [......................................................................]
85 % [......................................................................]
86 % [......................................................................]
87 % [......................................................................]
88 % [......................................................................]
89 % [......................................................................]
90 % [......................................................................]
91 % [......................................................................]
92 % [......................................................................]
93 % [......................................................................]
94 % [......................................................................]
95 % [......................................................................]
96 % [......................................................................]
97 % [......................................................................]
98 % [......................................................................]
99 % [................................................... ]
Done
Finishing transfer
[Type Ctrl-\ + c to quit]
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01_v1.06 (Jun 30 2017 - 16:08:19) Marvell version: 2014_T3.0p6 - bodhi-tld-6
mvBoardSatRRead: Error: Read from S@R failed
mvBoardSatRRead: Error: Read from S@R failed
mvBoardSatRRead: Error: Read from S@R failed
Board: DB-88F6820-BP
SoC: MV88F6828 Rev A0
running 2 CPUs
CPU: ARM Cortex A9 MPCore (Rev 1) LE
CPU 0
CPU @ 1600 [MHz]
L2 @ 800 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM: 2 GiB
Map: Code: 0x7fece000:0x7ff960f0
BSS: 0x7ffef654
Stack: 0x7f9cdf20
Heap: 0x7f9ce000:0x7fece000
U-Boot Environment: 0x00100000:0x00180000 Address: 0x00100000(NAND)
NAND: ID: dcad ,512 MiB
MMC: mv_sdh: 0
bootcmd: run bootcmd_custom; setenv bootargs root=/dev/ram console=ttyS0,115200; nand read.e 0xa00000 0x500000 0x500000;nand read.e 0xf00000 0xa00000 0x500000;bootm 0xa00000 0xf00000
USB2.0 0: Host Mode
USB3.0 0: Host Mode
USB3.0 1: Host Mode
Board configuration detected:
Creating 1 MTD partitions on "nand0":
0x00001f500000-0x00001ff00000 : "mtd=7"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=7"
UBI: MTD device size: 10 MiB
UBI: number of good PEBs: 80
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 32
UBI: total number of reserved PEBs: 48
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 4/1
UBIFS: mounted UBI device 0, volume 0, name "reserve2"
UBIFS: mounted read-only
UBIFS: file system size: 4063232 bytes (3968 KiB, 3 MiB, 32 LEBs)
UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 200807 bytes (196 KiB)
Loading file '/mac_addr' to addr 0x02000000 with size 36 (0x00000024)...
Done
lan mac_addr : 00 90 a9 e7 b6 2c
Set lan 0 WakeOnLan ok
Set lan 1 WakeOnLan ok
MicroP Enable HD
Enable HD1
Enable HD2
Enable HD3
Enable HD4
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga0 | RGMII | 0x00 |
| egiga1 | SGMII | 0x01 |
egiga0 [PRIME], egiga1
Hit any key to stop autoboot: 0
Marvell>> printenv
CASset=max
MALLOC_len=5
MPmode=SMP
autoload=no
baudrate=115200
boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
bootargs=root=/dev/ram console=ttyS0,115200
bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=run bootcmd_custom; setenv bootargs root=/dev/ram console=ttyS0,115200; nand read.e 0xa00000 0x500000 0x500000;nand read.e 0xf00000 0xa00000 0x500000;bootm 0xa00000 0xf00000
bootcmd_auto=stage_boot $boot_order
bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000;
bootdelay=1
cacheShare=no
console=console=ttyS0,115200
device_partition=0:1
disaMvPnp=no
eeeEnable=no0
enaClockGating=no
enaCpuStream=no
enaFPU=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:12:22:20
eth1mtu=1500
eth2addr=00:50:43:12:01:20
eth2mtu=1500
eth3addr=00:50:43:22:01:12
eth3mtu=1500
ethact=egiga0
ethaddr=00:50:43:01:22:20
ethmtu=1500
ethprime=egiga0
fdt_addr=2040000
fdt_skip_update=no
fdtaddr=0x1000000
fdtfile=armada-38x-modular.dtb
filesize=24
ide_path=/
image_name=uImage
initrd_name=uInitrd
ipaddr=2.66.66.203
kernel_addr_r=2080000
lcd0_enable=0
lcd0_params=640x480-16@60
lcd_panel=0
loadaddr=0x02000000
loads_echo=0
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=armada-nand
mtdparts=mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),441m@15m(image.cfs),15m@456m(rescue_fw),20m@471m(config),10m@491m(reserve1),10m@501m(reserve2)
mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
mv_pon_addr=00:50:43:20:01:12
nandEcc=nfcConfig=4bitecc
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,0
pcieTune=no
pexMode=RC
pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
ramdisk_addr_r=2880000
rootpath=/srv/nfs/
sata_delay_reset=0
sata_dma_mode=yes
script_addr_r=3000000
script_name=boot.scr
serverip=2.66.66.32
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
usb0Mode=host
usbActive=0
usbType=3
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81
~4eep