SSD speed in Pogoplug Pro (1 reply)
Hi all, I have 2 pogoplug pro's running Debian bookworm, latest kernel: Linux pogo01 5.15.158-oxnas-tld-2 #2 SMP PREEMPT Sun May 12 18:45:05 PDT 2024 armv6l GNU/Linux In both plugs I have installed an...
View ArticleLet's gift a new life to my poor old Iomega ix4-200d (1 reply)
Hi everyone! I own an Iomega ix4-200d NAS, with four 2TB disks. I tried installing OpenWRT but even latest version cannot detect the four disks (just bays #3 and #4). So... I would like to try another...
View ArticlePogo Plug V3 Kernel 5.15.158 Oxnas ethernet address (1 reply)
Hi, I just created a clean install on a Pogo Plug V3 with the latest rootfs Kernel 5.15.158 Oxnas. After finishing the install and booting I see that is it using MAC address 5a:ea:2e:cb:XX:XX on my...
View Articlehello need a help about a dvr running Uboot (no replies)
i lost my password of my eagle vision DVR camera , and there is no way to reset the password i tr i did try all tricks and without succes so i opened it and with a SPI programmer i did exetrat whole...
View ArticleProblem with Kernel linux-6.10.11 install (1 reply)
Hi bodhi. Thanks for providing us this new kernel! I tried installing on my Kace M300, and I get an 'Illegal instruction' error in Step 3 (installing it with dpkg): root@kace:~# uname -r...
View ArticleUnbrick Synology DS415+ (no replies)
Hello, Owner of a DS920+ and older DS415+, I wanted to use them in cluster. Since it requires the same DSM version on both NASes, I "played" with my DS415+ to make it think it's a newer model. I just...
View Articleroot access for CloudVue Thin Client (no replies)
I recently acquired some odd thin client devices with 4xHDMI ports and some other odd features. The company is long gone so I don't think I'll be getting GPL source or a clean copy of the firmware...
View ArticlePlease add built-in kernel UBIFS support for Kirkwood and any other boards...
I am trying to update an Ionics Nimbus 100 SoC from Debian 6 (eMMC UBIFS rootfs) to Debian "stable". (The Ionics Nimbus 100 is a repackaged version of the Marvell SheevaPlug.) I am stuck at the point...
View Articlelinearize skb with tiny unaligned fragent is back ? (4 replies)
Hallo, really nice to see I can use my very old goflex-net / -home and docstar with an actual kernel ! (Thank you very much !) What I did: 1.) Download your file for linux-6.10.11 .... 2.) untar...
View ArticleFlashing u-boot WD EX4100 (9 replies)
Hello, I've managed to mangle up u-boot on this WD EX4100 by trying to flash "u-boot-a38x-Yellowstone_2014T30p6_bodhi-tld-6-nand-uart.bin" from within uboot. My ultimate goal was to run Debian on this...
View Articletbs2921/moi+ kernel (1 reply)
Hallo everybody, i have this hardware, from tbs, named moi+ thanks for making it possible to install debian. now, being able to run debian from usb, i would like to try to launch the stock kernel and...
View Articletbs2921/moi+ (1 reply)
Hallo everybody, i have this hardware, from tbs, named moi+ thank for making it possible to install debian on it now, being able to run debian from usb, i would like to try to launch the stock kernel...
View ArticleLatest released kernel lost initrd.img-6.10.11-kirkwood-tld-1 ? (3 replies)
/boot# mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-6.10.11-kirkwood-tld-1 -d initrd.img-6.10.11-kirkwood-tld-1 uInitrd mkimage: Can't open...
View ArticleBIOS Synology RS815+ (no replies)
Hi everyone, I’m trying to reprogram the BIOS chip on my Synology RS815+. Unfortunately, Google hasn’t been able to help, and I’m struggling to find or compile a suitable BIOS file. If anyone has a...
View ArticleHow-To: Debian and U-Boot on WD MyCloud EX4100 (2 replies)
Last update: 02-11-2024 This How-To is a Work-in-Progress, and will be fleshed out over the next few weeks as I transfer my own notes compiled from the work of others on this forum (bodhi, hmartin,...
View ArticleLinux Logo (no replies)
Now it's time for a bit of fun with Linux Logo! apt-get install linuxlogo And then add this command to the end of your ~/.profile (~ is whatever user you login into). /usr/bin/linuxlogo -a -s -u -F...
View ArticleSynology DS211: Build latest u-boot and install Debian or OpenWRT (2 replies)
Hello, I have this device: DS211 Marvell Kirkwood 88F6282 Goal is to build latest u-boot and install Debian or OpenWRT. Stock u-boot has no saveenv command, but I have also red in some forum posts...
View ArticleDebian on TBS2921 MOI+ (71 replies)
Hallo everybody, i have this hardware, from tbs, named moi+ thank for making it possible to install debian on it now, being able to run debian from usb, i would like to try to launch the stock kernel...
View ArticleDebian on Synology DS211 (15 replies)
Hello, I have this device: DS211 Marvell Kirkwood 88F6282 Goal is to build latest u-boot and install Debian or OpenWRT. Stock u-boot has no saveenv command, but I have also red in some forum posts...
View Article2024.10 U-Boot Kirkwood - TBS MOI+ (no replies)
2024.10 U-Boot Kirkwood - TBS MOI+ This instruction is still a work-in-progess. ========================================= Update 13 Nov 2024 Download at Dropbox I have not uploaded the tarball to...
View Article