I've untar'd the latest rootfs to both MMC and USB devices (Debian-3.17.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 from here) and my pogoplug v4 will boot to a solid green front led. However, after stabilizing, there is no activity on eth0. I have a steady amber link light, but the green activity light does not light up at all.
Background
I was initially trying to flash the internal memory, following a combination of Qui's guide, with the latest images from Bodhi, but I evidently screwed something up along the way. Without an MMC or USB plugged in, it seems to be boot-looping. It does a few seconds of flashing green, and then some flashing red led, and then repeat. While this happens, there is activity on eth0.
Any ideas on why there is no activity on eth0 when booted to the rootfs image? Obviously, with no network activity, I can't ssh or even nc.
Thanks in advance! I'm still trying to make my way through all of the knowledge on this site!
Background
I was initially trying to flash the internal memory, following a combination of Qui's guide, with the latest images from Bodhi, but I evidently screwed something up along the way. Without an MMC or USB plugged in, it seems to be boot-looping. It does a few seconds of flashing green, and then some flashing red led, and then repeat. While this happens, there is activity on eth0.
Any ideas on why there is no activity on eth0 when booted to the rootfs image? Obviously, with no network activity, I can't ssh or even nc.
Thanks in advance! I'm still trying to make my way through all of the knowledge on this site!