iConnect starting from scratch (no replies)
To make a long story short I have an iConnect in my posession collecting dust. I think at one point I did try running ALARM on it but no longer have the rootfs drive so whatever NAND/uboot changes...
View ArticleIssue with fresh install on Pogo-E02 (2 replies)
I just bought two pink pogoplugs with the intention of putting debian on them, and I have hit a bit of a wall. reference: http://pastebin.com/v0YFU5Qb i partitioned my flash drive according to the...
View ArticlePogoplug E02 boot issue (1 reply)
Hi everyone, I have tried several tutorials to install Debian and ArchLinux on my Pogoplug. The installs are running without a problem. After booting from the usb key, the LED blinks and light than...
View ArticleERROR : memory not allocated (no replies)
Hi, my Goflex-Net in serial connection: U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:35:50) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial...
View ArticleNetwork Performance Tweaks (no replies)
Has anyone tried any tweaks which would improve the performance of network ? Or anything like that net.ipv4.tcp_rmem = 4096 524000 67110000 net.ipv4.tcp_wmem = 4096 524000 67110000...
View ArticleKernel with Bluetooth? (2 replies)
Hi, is there a kernel for my iConnect with bluetooth support? lg
View ArticleGoflex Net -Error: unrecognized/unsupported machine ID (r1 = 0x00000c11). (3...
Hi Bodhi Unbelievable low chance to have blackout while uboot update. But I have. :) Cant boot from USB or SATA. I only have serial console. (and netconsole too, but prefer serial.) On serial console...
View ArticlePogo v4 no ethernet activity, latest rootfs (5 replies)
I've untar'd the latest rootfs to both MMC and USB devices (Debian-3.17.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 from here) and my pogoplug v4 will boot to a solid green front led. However, after...
View ArticleClean Install On POGO-V4-A1-01 SD Card Stuck At Starting kernel (3 replies)
I installed Debian to boot from an SD card using Qui's post titled Hacking the Pogoplug v4 (Series 4 and Mobile) with Linux (Debian or Arch). I followed the guide closely, with the only substitution...
View ArticleGoing from non-FDT to FDT - The changes i made (no replies)
Hi! I recently upgraded my Pogoplug V4 with the 3.17-kernel using the DTB-file. I'm just going to share in short terms the changes i did to the envs under the main installation. And then also the...
View ArticleCan't Get Kernel Image -- multi-drive (1 reply)
First of all, thanks to Bodhi and others for such a wonderful, cool project. I have been loading the rootfs image with the 3.16 kernel on a few pogoplugs and dockstars and I am amazed how well they...
View ArticleRestore Pogoplug V4 to factory State (1 reply)
Hix i saw the topic with IPTester related with recovering his pogoplug v4 and i would like to know if you could help me to restore it to factory state. I did some ArchLinux mod (post here:...
View ArticleNanddump bug? Offset error? (3 replies)
As we all know on the Pogoplug V4, the original U-Boot envs are stored at address A5000 (dec 675840) in mtd0. However when backing up mtd0 from Debian, the original envs are now located at A0000 (dec...
View ArticleU-Boot - Booting process with partition label in multiple drives...
I'm starting this thread specifically about the booting process so that we can have a home for questions/answer about booting process. This post starts with a summary, and later we can expand the...
View ArticleOdroid Devices ? (no replies)
Just got Odroid C1 , anyone here would supporting with recent updates ?
View ArticleNSA325v2 flashing uboot.2013.10-tld-1.nsa325.mtd0.kwb (17 replies)
Hello :) I am trying to flash a NSA325v2 with testing u-boot uboot.2013.10-tld-1.nsa325.mtd0.kwb, the uart-version is working fine. I am using debian wheezy on a pluged usb-stick. Problem is that I...
View ArticleGrrr. Where do I start? (Again.) (2 replies)
Wow. It's been a while. My Dockstar is still running strong. rat@redstone:~$ uptime 05:14:10 up 859 days, 3:22, 3 users, load average: 0.07, 0.04, 0.00 rat@redstone:~$ uname -a Linux redstone...
View ArticleOverprovisioning A Flash Drive ? (no replies)
I want to have another go with flash USB stick or SD cards. I had some pretty bad experiences in the past and prefer hard drive booting and operation. However bohdi seems to think it's doable with USB...
View Article[Solved]Can't get Debian to boot on NSA325 (no replies)
Hello, I tried to boot Debian on my NSA 325 following this guide http://zyxel.nas-central.org/wiki/Debian_on_325 Unfortunately I can't get Debian to boot up. Everytime I try to boot the USB stick I...
View ArticleNo serial output from kernel on Iomega ix2-dl(ng) (no replies)
Hi! I've stuck in a strange problem while trying to install Debian on my Iomega/LenovoEMC ix2-dl device, so I decided to ask community for help. The situation for now is: - have a working serial...
View Article