Pogoplug V3 (Pro and Classic) - Sample u-boot Env's for uEnv.txt (2 replies)
******!!!!CURRENTLY BETA AND FOR SINGLE DEVICE ATTACHED BOOTING ONLY!!!!!******** With the release of the latest bodhi u-boot for Oxnas (uboot.2013.10-tld-4 u-Boot), those of us with Oxnas powered...
View Article-edited- Damn Small Linux has "System Stats" (no replies)
- I hate to edit so drastically, but I had little idea DSL had a System Stats app. This helps immeasurably (or in other words measurably) to have a clue what's under the hood. A month ago I thought...
View ArticleNSA 325 Bricked (3 replies)
I think I did it. My NSA 325 is bricked. I followed these instructions, where I did the MTD0 flash using the stock NSA 325 firmware, and I also did rewrite the environment to 0xc0000....
View ArticleUSB not unmounted correctly before shutdown - automatically check and fix on...
Hi After a dirty shutdown, rootfs did not mount properly and my pogoplug did not boot - I had to put the flash drive into a Linux computer and do a file system check. Under e.g. Ubuntu, this is done...
View ArticleIdeal hard drive for Pogoplug Alarm? (no replies)
For the time being, I have one stable OS (alarm) archived on a slow USB stick, and operate my experiments on old, throwaway IDE drives (all 40GB). Seems like a good question to ask, has anyone found a...
View ArticleIs SATA connector just a USB with that funny end down? Answer: No (1 reply)
The adapter I got lately (SATA/IDE to USB 2.0 Adapter), it adapts a desktop and notebook IDE and a SATA port, to a USB plug. Works in the Pogoplug. This is super handy, that I can make an image on USB...
View ArticlePogoplug V3 - Can't Fully Load Kernel (no replies)
I've got a Pro with some booting and nand issues that I promised myself I would give up on as hopeless. I'm booting it off of the specially prepared sata drive and when I start booting the kernel I...
View ArticleDelay mounting of external hdd on pogoplug (1 reply)
Hi I use a pogoplug as a Logitech Media Server and as a TimeCapsule (for TImeMachine backups from a Mac) and it works nicely. I just have one problem: after a dirty shutdown, in case that the external...
View ArticlePro vs. E02 - Some Benchmarks (4 replies)
I picked up a bricked E02 on eBay and was able to fix it with serial console. I thought it the appropriate time to compare the performance with my Pro. Here are some benchmarks for both devices using...
View ArticleNot booting into Debian - pogoplug (3 replies)
My pogoplug is not booting from the flash drive anymore. The nc output is as follow: U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1...
View ArticlePossible to write nc output on pogoplug into logfile? (no replies)
Hi is it possible to write the boot output (the one send via nc, or even more detailed) to a local logfile on an attached USB Flash Drive (or on the pogoplug itself)? This would make debugging during...
View ArticleNSA325 V2 noise (6 replies)
All, I've been running NSA325v2 only on demand with WOL, because I can't stand the noise. From what I've read (I don't have the V1) it is a great improvement over the V1. However, still it's just a...
View ArticlePogoplug E2 - get LED right (7 replies)
Hi I managed to boot into Deboian again, but I had to reset the uBoot variables. Unfortunately, I have forgotten which ones I changed. Now everything works, but not the LEDs - the light on the...
View ArticlePogoplug - rc.local is empty? (1 reply)
I just realised that the rc.local file is empty on my new weeezy installation - while before my re-installation, there was code concerning the LED in it. Can somebody enlighten me what might have...
View ArticleDebian defaults (2 replies)
Just keeping track of some stumbling blocks encountered (knowing that much might be intentional to keep the system "lean" or as an incentive for "learning" ;-) - but best solutions everyone needs...
View Articlewhat have YOU used your *plug device for.... (3 replies)
Just thought i would start a topic to see what people on the forum use there plug for and what they have built with it,,,,,
View Articlewhat do you use to access your *Plug? (9 replies)
In addition to a great question asked by Gravelrash, I couldn't help but ask, how you access your Pogo-or-thereabouts plug? I've been using a Windows 7 x64 machine that's 100 watts, into a router and...
View ArticleRestoring Uboot Environment from a Text file (1 reply)
Recently updated one of my Dockstars with the latest uBoot (2014.07) and also flash the new uBoot environment image. Now I can't boot into the Jeff's rescue system that is installed in flash. I do...
View Article-naw Debian attempt whacked again. Arch fine. And that's the greatest love of...
-update and edit 7: I deleted what I used to say. It was about installing Debian on 2nd USB stick using Arch on the first. After some problems... I took the Debian stick that had 555 MB of something...
View ArticleEver run Unreal Tournament 2004 on Linux? (no replies)
I was never a dedicated game player, probably because of how lousy i felt when UT3 came along and by the time i got a machine capable of runingm it, found it wasn't any fun. But UT 2004, I'm still...
View Article