(WIP) Linux Kernel 3.18.5 Seagate Business Storage NAS (CNSxxx) package (2...
Linux Kernel 3.18.5 CNSxxx package (Non Flattened Device Tree) for Seagate Business Sorage NAS. This is an initial release for a work-in-progress kernel. Please try this a testing kernel and expect...
View Articlecannot change SSH password (6 replies)
I am having a similar issue like mentioned here, although mine is that I cannot _change_ my SSH password ... I have a PogoplugPro, that I got used a couple of years ago. I was playing around with it...
View ArticleuBoot update script - PogoplugPro ... ? (3 replies)
Before I brick my device - does the uBoot update script mentioned here work for a PogoplugPro? When I run it, it explicitely says: This installer will only work on the following devices: Seagate...
View Articlestep by step of how to install Debian on stock PogoplugPro (12 replies)
I am reading posts here about installing Debian with the latest rootfs and the latest uBoot and I am jumping around between references to topics and I am getting utterly confused. Where exactly do I...
View Articleserial cable - parts (no replies)
I purchased this (and this) on eBay. I am all thumbs and just wanted to make sure that this would make a good serial cable for my Pogoplug, before I plug it in and fry my board ... Thanks!
View ArticleInstall Debian on Seagate GoFlex's hard drive (no replies)
Ok. So I am a noob when it comes to uboot/netconsole, etc. However, I can follow instructions if I can find them! I previously had installed Arch Linux on my GoFlex following the instructions over at...
View ArticlePogo V3 Oxnas Booting with SATA and USB (1 reply)
Hi Sorry for the delay in replying to your suggestion. I tried your suggestion and some other different things in the U-Boot environment to try and get the Pogoplug to boot Debian from a Sata disk...
View ArticleFreeBSD/NAS4Free on GoFlex net? (1 reply)
Hi guys, Thanks to all the fabulous people here I've been using debian on my 3 goflex net machines quite happily for several years now but after virtualizing my asterisk servers I have a free pair of...
View Article(SOLVED) How to enable smb2 / smb3 (1 reply)
I'd like to try SMB2 / SMB3 between pogoplug and windows 8.1 but so far I can't get it to work. Windows 8.1 reports connection as SMB1. Here is my smb.conf. Should I add security to enable SMB3?...
View ArticleDebian on NSA310S? (1 reply)
I'm running Debian on Pogoplug E02, V4 Mobile, Goflex Net, Iconnect, NSA320, NSA310, so I tried this on NSA310S. After changing the U-Boot environment to dual boot ZyxelOS or Debian (USB Stick) I'm...
View ArticleSlipstream ubuntu/Fedora/SuSE/Xandros graphics driver on Debian? (no replies)
Although Mint and therefore Ubuntu run on my VIA vx900 Thin Client, Debian will only install and work with Terminal and Webmin over LAN. VIA offers drivers for the OS's listed above, and Debian...
View ArticleAllWinner devices now using mainline kernel (no replies)
Although it seems we don't have a lot of users with Allwinner devices, this is interesting nonetheless for a few who do. This means a patch is available to build Debian kernel.
View ArticleIDE read: device 0 not ready with U-Boot 2014.07-tld-2 (11 replies)
Hello, I have a boot problem with a 6G/s SSD. (1.5 G/s WD drive works fine) U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:58:11) Seagate GoFlex Net gcc (Debian 4.6.3-14) 4.6.3 GNU ld (GNU Binutils for...
View ArticleBoot problem with USB hard disk attached (5 replies)
So I got a couple of Fantom Gforce/3 Mini drives on sale to go with the $5 Pogo Pro and Mobile I got to make a couple of poor man's NASs for family members. Everything works pretty well except that if...
View ArticleNSA320 mod for an additional usb port (1 reply)
Hi, since - with the aid of bodhis new uboot and kernel/rootfs - it is now possible to boot the NSA320 from an usb port and have an internal software raid on the two sata ports, only one problem...
View ArticleVirtualizing a small Linux device like Pogoplug? (3 replies)
I got VMware the other day and am surprised to learn you can make a VM (Virtual Machine) out of OS/hardware combinations by IP'ing into them using the included VMware vCenter Converter. Additionally...
View Articlecorrect uEnv.txt for recovering pogoplug v4 mobile environment (1 reply)
I've successfully updated U-Boot on it and I'm using bodhi's rootfs. A fiew days ago I noticed that I have a limited environment so I changed it via fw_setenv like on other devices but it doesn't came...
View ArticleNetconsole performance (2 replies)
I have a pogoplug e02 running: U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:52:18) Net console lags, when I type in ? it takes 30-45 seconds to display. In the serial console when booting it says: host...
View ArticleIs possible to chainload Bodhi's Uboot from stock Uboot? (8 replies)
I did an automated installer script to install debian and OMV into Zyxel NAS boxes from nsa310 onwards. For nsa325 and the v2 it's not possible to disable reliably the watchdog without flashing your...
View ArticleAutomated Debian Installer for Zyxel nsa310, 320 and 325 (no replies)
I made an automated installer to install Debian easily on nsa310, 320 and 325 (and probably 310s and 320s too). It did take some minor ideas from the Arch install script, but is safer, smarter,...
View Article