smbnetfs can't preserve date time (1 reply)
I've been using smbnetfs to transfer files using cp command across multiple Debian servers. Everything works great, copying files never failed. But there is a problem with preserving date and time,...
View ArticlePogoplug not booting into debian (1 reply)
Following the guide here: http://projects.doozan.com/debian/ Using debian squeeze. The thing will not boot from USB no matter how many times I pull the plug, reinstall to the usb stick, or which USB...
View ArticleNo init found. Try passing init= bootarg. (no replies)
Hi everyone! I recently received a used Pogoplug E-02 and now I am trying to use some flavour of debian with it. Unfortunately I ran into some problems, which no one else seems to have. I tried 3 of...
View ArticlePogoplug Series 4 $29.99 (1 reply)
https://pogoplug.com/promo/save70b?utm_source=dockstar&utm_medium=email&utm_campaign=save70_series4_b
View Articlepogo-e02 - no boot after upgrade to 3.9.1 kernel (no replies)
solved with a new installation... can be purged
View ArticleProblem with two SATA drives on GoFlex Net (4 replies)
Hi, You guys seem like you have got a clue! I have a small issue with my GoFlex Net. The device has got two SATA ports, so I would expect there to be two symlinks under /dev/disk/by-path/ after...
View ArticleInstall debian from resuce v2: perl conflict (no replies)
Hi, I had a usb-stick going bad and now have to reinstall debian on my pogoplug v2. I have the rescue system v2 installed, but following the instructions from here http://projects.doozan.com/debian/ I...
View Articlehowto write uboot to nand (1 reply)
I thought I should ask before I screw this up. I have a new uboot that I load with kwboot. It works fine and I want to write it to nand. I see many references to write it after loading with tftp but...
View ArticleDockstar U-boot problem (9 replies)
I have a dockstar with debian which have been working for 3 years without problem. But now, every time I tried to reboot it, it just hangs there, it can not fall-back to original system either. I...
View ArticleInstall script won't work (1 reply)
Hi, Sorry for cross-posting, but maybe this forum is more adequate for my problem. I had a usb-stick going bad and now have to reinstall debian on my pogoplug v2. I have the rescue system v2...
View ArticleDockstar can not boot into debian (10 replies)
I have a dockstar worked with debian for a long time. This weekend, I updated the uBoot on it and now, it can not boot into debian anymore. I have tried several flash drives which all work fine on...
View Articleudev problem with PEARL display at dockstar / lcd4linux (no replies)
Dear all, context: PEARL Display at Dockstar on Debian Wheezy I have problems with udev while connecting the PEARL display to a dockstar. The problem is not lcd4linux, that works and the display is...
View ArticleGoFlex Home doesn't connect to router / maybe doesn't boot correctly (4 replies)
Hey, after I recently rebooted my GFH, I just can't connect to it anymore via ssh. It is also not pingable. But I'm not even sure if it gets a correct IP from my router; That seems to have some...
View ArticleCan only access to GoFlex Home 3TB with rescue - need help (11 replies)
GoFlex Home 3TB got semi bricked and I can only access it from a rescue USB flash drive. I finally got to it and tried to install debian on my GoFlex Home 3TB. I followed Jeff's guide. The wheezy...
View ArticleUboot to support different name of uImage (5 replies)
Is it possible to add an option to uboot install scripts to let an installer to enter/change the name of Linux kernel? The reason I asked this question is OpenWRT uses a different Linux kernel name,...
View ArticleMy experience with MK808 and MK802 (1 reply)
I was interested in installing Debian/Ubuntu on these devices. Because there are so many clones and some of images do not work, I struggled for a while and eventually find some sourses to make them...
View ArticleMy goflex now stops at "booting kernel" (2 replies)
Hello, I have hacked and now I was using successfully a seagate goflex net with a debian nsa320 image. Now it has stopped working. I "obviously" enabled debugging with netcat and I obtain this log,...
View Article10.0 on guruplug missing boot sequence display (no replies)
This is probably not strictly a Debian question but I have compiled a 10.0 kernel for guruplug. Runs ok except there is no display during the boot sequence when init steps through the run levels Like...
View ArticleA10: Compiling newer mali kernel (!) driver, r3p1??? (no replies)
Hi guys, just a quick question. It seems that Allwinner stayed with the r3p0 mali kernel drivers for a long time now already. No change there for months, while arm already published r3p2-01rel2. Now,...
View Article