Need help getting bluetooth working on supported hardware (no replies)
Guys. I'm trying to get bluetooth working on what I think is supported hardware. I've got a Trendnet tbw-101ub usb bluetooth dongle. I've searched and saw postings saying that it works out of the box....
View ArticleKnown working Bluetooth USB stick (no replies)
Can someone tell me the make/model of a known working Bluettoh USB stick that I can use with my Pogoplug Pink? Thanks for the help!
View Articlechange usb-stick to sda (4 replies)
Hello everybody, I have a goflex_home system. Now I am trying to produce a bootable usb-stick with debian following Jeff's tutorial. I experienced two problems: 1 fdisk seems to fail in writing the...
View ArticleSupport for 96x64 displays (no replies)
Hi all, I bought (for 2 euros!) a tiny SoccerBall photo frame, meant to store pictures of your favorite soccer team (?) The main issue is that display resolution is only 96x64, while minimum supported...
View Articlelm-sensor config for NSA320 (no replies)
I have installed DavyGravy's lenny tarball and uboot package on my zyxel nsa320. I've been searching the net to find someone who has a config file for the fan control. I also note that under a...
View ArticleMele M5 internals (no replies)
Hi guys, I'm thinking to buy Mele M5, but as I hack on the kernel it should be frienly in this respect. Have you looked inside the case? Does it have UART connector? Can you maybe post some high...
View ArticleHelp compileing newest uBoot goflex net. Remove ubit? (no replies)
after being up late messing around with my ix2-200 i loaded the wrong kernel and ended up wipeing the uboot (oops). so now i am back to using my brother's old goflex net i already have it hacked but...
View ArticleAfter Upgrade to Wheezy reboot problem (2 replies)
Hi, I made an upgrade from Debian Squeeze to Wheezy. After apt-get upgrade the reboot was fine. Then I made apt-get dist-upgrade and now I'm unable to reboot. Here is the output on netconsole First...
View ArticleRockchip mk808 help (1 reply)
The reason I bought my device was mainly watch a downloaded movie stored on my p.c. on my television. Let me start off by saying I have no wify signal problems at all. I go on movie sites quite often...
View ArticleDebootstrap aborted while installing to Pogoplug (1 reply)
Hello there! I finally got around to setting up my (pink) Pogoplug, using this guide http://wiki.daviddarts.com/Pogoplug and the script from shyd.de it mentions. Only after the debootstrap install...
View ArticlePogoplug E02: Squeeze install not booting multiple USB (9 replies)
Total noob here--have hit a brick wall and have tapped out my limited knowledge. I'm stuck and in need of help. I attempted a Wheezy install based on the scripts on doozan.com but it failed at the...
View ArticleLEDs on GoFlex Net (no replies)
I've just completed my project to get my GoFlex Net running Debian using davygravy's rootfs (thank you davygravy, it's a neat rootfs that's reliable and works well). I will post about my experiences...
View Article[SOLVED!] I goofed up my GoFlex NET (11 replies)
Hello All, I recently bought a used GoFlex NET from Amazon, all was well, I wrote to the PogoPlug guys they activated it, got SSH going. Tried to install Arch Linux and went crazy as I was not able to...
View ArticleKernal upgrade (7 replies)
I have a Goflex home booting off of an 80G hd. I am not much of a linux person, but I pick stuff up here and there. I did a 'apt-get update', then I did a 'apt-get upgrade' and it says that it...
View ArticleDoes hd-idle works too good? dockstar falls "asleep" (no replies)
Hello. Last weekend i updated my both dockstars to DEBIAN WHEEZY and to KERNEL 3.9.5. On both dockstars debian is installed on 4GB-USB-Sticks. I did it this way: upgrade to debian wheezy Kernelupgrade...
View ArticleHelp Recovering Pogoplug v4 with serial console and tftp (15 replies)
Hi all, I need some help restoring the original firmware on my Pogoplug V4 (A3-01). My actual situation is that I can only boot into uBoot. I don't have a working o.s. on the nand and I can't manage...
View ArticleUpgrading from old chained uboot on dockstar (no replies)
So, I've got a dockstar that I installed Debian Lenny on quite a while ago. I used the old instructions back when they were the recommended method to install. I used a little USB HDD to run Debian and...
View ArticleMove from USB stick to USB Hard drive for system (1 reply)
I'm currently using a USB stick as my system drive on a Pogoplug Pink. I'd like to take the existing data and move it to a USB hard drive. Can anyone tell me how to do this? Is it as easy as using...
View ArticleStill possible to buy an ax206 dpf? (no replies)
I am having a hard time to find any ax206 320x240. Does anyone know where they can be bought (and shipped to Europe)?
View ArticleHave I bricked my DockStar by upgrading to Wheezy? (8 replies)
I have happily been running Squeeze on my DockStar for a couple of years. A couple of days ago I decided to upgrade to Wheezy (something I have done with other hardware on numerous occasions). The...
View Article